MATEC Web Conf.
Volume 343, 202110th International Conference on Manufacturing Science and Education – MSE 2021
|Number of page(s)||6|
|Section||Computer-Aided Technologies (CAD/CAM/CAE - CAX), Virtual Engineering and Reverse Engineering|
|Published online||04 August 2021|
Common defects of parts manufactured through single point incremental forming
“Lucian Blaga” University of Sibiu, Department of Industrial Machinery and Equipment, Emil Cioran 4, Sibiu, Romania
* Corresponding author: email@example.com
Single point incremental forming is one of the most intensely researched die-less manufacturing process. This process implies the usage of a CNC equipment or a serial robot which deforms a sheet metal with the help of a relatively simple tool that follows an imposed toolpath. As every cold metal forming process, besides the many given advantages it has also some drawbacks. One big drawback in comparison with other cold metal forming processes is the low accuracy of the deformed parts. The aim of this research is to investigate the sheet metal bending mechanism through finite element method analysis. The results shows that the shape of the retaining rings has a big influence over the final geometrical accuracy of the parts manufactured through single point incremental forming.
© The Authors, published by EDP Sciences, 2021
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.