Free Access to the whole issue

MATEC Web of Conferences

Volume 344 (2021)

International Scientific and Practical Conference “Modern Problems and Directions of Development of Metal Science and Heat Treatment of Metals and Alloys, Dedicated to the Memory of Academician A. A. Baykov” (MPM 2021)

Kursk, Russia, September 16-17, 2021
A. Gorokhov (Ed.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 01 October 2021

PDF (284 KB)

Open Access

X-ray spectral microanalysis of W-Ni-Fe pseudoalloy obtained from electroerosive powders 01001

Evgeny V. Ageev, Oxana G. Loktionova, Sergey V. Pikalov and Valeryi I. Kolmykov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401001

Open Access

Granulometric composition of electroerosive nichrome powders obtained by electrodispersion of alloy Cr15Ni60 01002

Ekaterina V. Ageeva, Alexader Yu. Altuhov, Vladimir I. Serebrovsky and Valeryi I. Kolmykov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401002

Open Access

Professional responsibility in the aspect of road transport education 01003

Galina V. Bukalova and Alexander N. Novikov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401003

Open Access

Influence of oxide inclusions on the process of interparticle splicing of powder materials 01004

Maxim Egorov, Rimma Egorova and Zanna Ereveeva

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401004

Open Access

Methods for introducing carbon into the composition of structural powder materials 01005

Maxim Egorov, Rimma Egorova and Zanna Ereveeva

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401005

Open Access

The mathematical modeling of the process of hardening treatment of titanium blades of steam turbines 01006

Alexander Filonovich, Irina Vornacheva, Artem Chuichenko and Evgeny Bolotnikov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401006

Open Access

Wear of the PG-CP4 powder coating applied to HVG steel and subjected to laser treatment 01007

Vladimir Gusev, Valentin Morozov, Alexey Morozov and Dmitry Gavrilov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401007

Open Access

X-ray diffraction analysis of a sintered product made of electroerosive chromium-containing powder 01008

S.V. Khardikov, E.V. Ageeva, V.I. Serebrovsky and V.I. Kolmykov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401008

Open Access

Peculiarities of quasicrystalline films formation processes on crystal surface under irradiation with proton-ion flows 01009

Gennady Melnikov, Nikolay Ignatenko, Lyudmila Petrova, Vadim Suchilkin and Andrey Gromkov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401009

Open Access

On the influence of clustering processes in the liquid structure on Raman scattering 01010

Gennady Melnikov, Nikolay Ignatenko, Lyudmila Petrova, Olga Manzhos and Andrey Gromkov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401010

Open Access

Modeling of the PG-CP4 coating hardness applied to H12M steel and subjected to laser treatment 01011

Valentin Morozov, Vladimir Gusev, Alexey Morozov and Dmitry Gavrilov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401011

Open Access

Features of the damping capacity of Mn – Cu alloys 01012

Sergey Naumov and Svetlana Ginne

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401012

Open Access

Geographic information system for the accumulation and processing of data on road accidents 01013

Alexander Novikov, Ivan Emelianov, Andrey Kolvah and Alexey Tarasov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401013

Open Access

Validation of functionability of transition metal and its alloys at the simultaneous introduction of two oxidizing agents in the volume of liquid phase 01014

Swetlana Pozhidaeva and Galina Buryih

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401014

Open Access

Modeling of structural transformation kinetics in steels during their heat treatment 01015

Liudmila Roslyakova, Vladimir Paukov, Aleksandr Besedin and Vadim Suchilkin

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401015

Open Access

Long-length tubular Electrode-Tools from Composite Material for Electrical Discharge Machining of Hard Alloys 01016

Evgeny Shalunov, Valentin Smirnov, Vladimir Plotnikov and Yulia Vladimirova

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401016

Open Access

Formation of the structure and properties of composite materials based on copper powder during its reactionary mechanical alloying with titanium, carbon and oxygen 01017

Valentin Smirnov, Evgeny Shalunov, Aleksandr Yanyushkin and Pavel Danilov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401017

Open Access

Using the Achimovka Technique in the Oil Industry as One of the Modern Ways of Increasing the Competitiveness of the Russian Federation in the World Market 01018

Violetta Kuzmina

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401018

Open Access

Regularities of Cementite Decomposition in Hypereutectoid Steels 01019

Sergey N. Kutepov, Andrey V. Malyarov, Igor V. Minaev and Alexander E. Gvozdev

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401019

Open Access

Regularities of Changes in the Microhardness of Carbon Steels during Gas Laser Cutting 01020

Igor V. Minaev, Evgeny V. Ageev, Sergey N. Kutepov and Alexander E. Gvozdev

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401020

Open Access

Thermal processes under explosive loading of amorphous alloy powders 01021

Yury Voloshin, Ruslan Zhemukhov and Marina Zhemuhova

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401021

Open Access

Service properties of composite electrochemical coating 01022

E. M. Yudina, Yu. E. Kisel, M. R. Kadyrov and A. S. Serguntsov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401022

Open Access

Improving the efficiency of maintenance of heavy-duty engines 01023

Nikolay Zagorodniy, Alexander Novikov and Ivan Novikov

Published online: 01 October 2021

DOI: https://doi.org/10.1051/matecconf/202134401023