Open Access Plane strain bending under tension as an ideal flow process in pressure – dependent plasticity 01001 Sergei Alexandrov and Prashant Date Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801001 AbstractPDF (103 KB)References
Open Access Finite element analysis on the wire breaking rule of 1×7IWS steel wire rope 01002 Du Wenzheng, Ma Baozhu, Xie Zheng, Cao Dazhi and Wu Peng Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801002 AbstractPDF (1.23 MB)References
Open Access Preparation of a self-curable unsaturated polyester with vinyl double bonds and Investigation of its self-curing properties 01003 Haiyan Li, Fangfang Zhu and Chongwen Li Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801003 AbstractPDF (121 KB)References
Open Access Cracking behavior of thin gold strip deposited on polycarbonate plate under Cyclic and stepwisely-increased tension 01004 Naoya Tada, Yafei Hu, Takeshi Uemori and Toshiya Nakata Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801004 AbstractPDF (409 KB)References
Open Access Research on vibration noise of the composite laminated plate structure based on the FEM-BEM 01005 Yang Xu, Dongyan Shi, Xiaoyan Teng and Hongxi Ren Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801005 AbstractPDF (287 KB)References
Open Access Oblique crushing performances of hybrid woven Kenaf fibre reinforced aluminium hollow cylinder 01006 Al Emran Ismail, Mohd Norihan Ibrahim, Saifulnizan Jamian, Kamarul-Azhar Kamarudin, Muhammad Khairudin Awang and Mohd Khir Mohd Nor Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801006 AbstractPDF (2.04 MB)References
Open Access The working zone in the interpolar area of the Faraday balance: an approach to testing the magnetic force factor stability criterion 01007 Alexander V. Sandulyak, Anna A. Sandulyak, Maria N. Polismakova, Dmitry O. Kiselev, Darya A. Sandulyak and Vera A. Ershova Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801007 AbstractPDF (335 KB)References
Open Access Enhancement of photocatalytic property on ZnS/MoS2 composite under visible light irradiation 01008 Jiushan Cheng, Lu Han, Yen Wei and Qiang Chen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801008 AbstractPDF (455 KB)References
Open Access Temperature Effects on Mechanical Properties of Woven Thermoplastic Composites for Secondary Aircraft Structure Applications 01009 Yue Wang, Jipeng Zhang, Jiazhen Zhang and Zhengong Zhou Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801009 AbstractPDF (1.31 MB)References
Open Access Tightening torque and washer size effects on bearing strength of fiber metal laminate bolted-joints 01010 Shiming Zu, Zhengong Zhou, Lu Che, Yanfeng Zhang and Jiazhen Zhang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710801010 AbstractPDF (518 KB)References
Open Access Experimental Analyses for The Mechanical Behavior of Pressed All-Ceramic Molar Crowns with Anatomical Design 02001 Liliana Porojan, Sorin Porojan, Lucian Rusu, Adrian Boloş and Cristina Savencu Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802001 AbstractPDF (1.18 MB)References
Open Access Utilization of slaughter plant waste proteins in gypsum retarder: A case study 02002 Xiong-mu Chen, Meng-meng Zhang, Ling-xiao Li and Feng-qing Zhao Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802002 AbstractPDF (98.6 KB)References
Open Access Direct Precipitation Method of Nano-CuO 02003 Mingyu Li, Kefu Ding, Zhihao Li and Zeng Qingxuan Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802003 AbstractPDF (2.20 MB)References
Open Access Contact stress analysis and optimization of single crystal turbine blade tenon/disk mortise structure considering thermal-solid coupling 02004 Lei Li, Zhonghao Tang, Dingyuan Deng, Mengchuang Zhang and Jiawei Yu Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802004 AbstractPDF (321 KB)References
Open Access A study on the application prospect of functional shirt fabrics in the uniform industry 02005 Xing Xue, Gu Wen, Li Li and Liu Xiaogang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802005 AbstractPDF (520 KB)References
Open Access Research on the Test Method of Machining Stress Based on the Instrumented Indentation Test 02006 Linlin Zhang, Xiaoyang Li and Rong Chen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802006 AbstractPDF (803 KB)References
Open Access Effect of air Recirculation on Moisture Removal Efficiency in Combined Hydrolytic–Aerobic Rotary Bio-Drying Process 02007 Khajon Somsai, Tusanee Tondee and Somrat Kerdsuwan Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802007 AbstractPDF (241 KB)References
Open Access Modelling of Thermal and Gas-Dynamic Processes in the Porous Structures 02008 M.N. Gaynullin, V.A. Sotova, P.A. Chertykovtsev, E.O. Barbonov and S.V. Zaika Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802008 AbstractPDF (474 KB)References
Open Access Utilization of abrasive water jet for cutting parts of intricate shapes 02009 Safwan M. A. Al-Qawabah, Adnan I. O. Zaid and Nasser Abdellatif Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802009 AbstractPDF (817 KB)References
Open Access Paste Backfilling Used for Coal Fire Control in Thailand 02010 Manoon Masniyom and Dang Vu Hai Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802010 AbstractPDF (368 KB)References
Open Access Material Research of Rotary Sealing Device for Combined Cutting System 02011 Zeng Rui, Zhang Yong, Lin Zhenrong and Wang Lulu Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802011 AbstractPDF (514 KB)References
Open Access Local Reinforcement in Notched Fiber Metal Laminates by Bonding Titanium Patch 02012 Jipeng Zhang, Yue Wang, Jiazhen Zhang and Zhengong Zhou Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710802012 AbstractPDF (3.24 MB)References
Open Access Comparison of sodium dithionite and glucose as a reducing agent for natural indigo dyeing on cotton fabrics 03001 Laksanawadee Saikhao, Jantip Setthayanond, Thitinun Karpkird and Potjanart Suwanruji Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710803001 AbstractPDF (161 KB)References
Open Access Eco-friendly coloration of linen to ameliorate its practical approach 03002 Md. Nahid Pervez, Umarsharif Y. Inamdar, Md. Eman Talukder, Sakil Mahmud, Md. Ahsan Habib, Md. Kamruzzaman and Yingjie Cai Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710803002 AbstractPDF (248 KB)References
Open Access Electrolyte influence on sorption behaviours of Direct Blue 71 dye on ramie fibre 03003 Chi Yuan, Kankan Lou, Liping Yu, Md. Nahid Pervez, Siwei Su, Jun Huang, Xiongyi Peng and Yingjie Cai Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710803003 AbstractPDF (321 KB)References
Open Access A novel study on UV protection and antibacterial properties of washed denim garment 03004 Md. Nahid Pervez, Md. Anisur Rahman, Liping Yu and Yingjie Cai Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710803004 AbstractPDF (400 KB)References
Open Access A novel route to process rationalisation on cellulose dyeing 03005 Md. Nahid Pervez, Mohammed Akramul Hoque, Liping Yu, Md. Moshfique Hossain Rinkon, Md. Salman Amin, Md. Nazmul Ehsan and Yingjie Cai Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710803005 AbstractPDF (492 KB)References
Open Access Making of Natural Dyeing Scarves by Tie-Dyeing Technique 03006 Jin Soun Jung Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710803006 AbstractPDF (719 KB)References
Open Access Study of Different Factors Influence on Thermocompressor Performance 04001 Evgeny Blagin, Alexandr Dovgyallo and Dmitry Uglanov Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804001 AbstractPDF (357 KB)References
Open Access Fully automatic CNC machining production system 04002 Jeng-Dao Lee, Cheng-Wei Tsai-Lin, Yi-Cheng Lee, Min-Che Liu and Li-Yin Chen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804002 AbstractPDF (3.42 MB)References
Open Access Formation and Control Technology of Top Burr in Micro-Milling 04003 Zhiyang Zhang, Zhenjian Yuan and Guicheng Wang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804003 AbstractPDF (1.58 MB)References
Open Access Experimental Study on Fracture Failure of BRW 250 Pump Liquid Valve Mechanical Spring Surface 04004 Zeng Rui, Zhang Yong, Lin Zhenrong and Li Jie Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804004 AbstractPDF (474 KB)References
Open Access Model and Simulation of Globoidal Cam Mechanisms with Oscillating and Dual Stopping Followers 04005 Rongyu Ge, Jin Wang and Chengliang Zhang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804005 AbstractPDF (516 KB)References
Open Access Initial Tool Orientation Set-up for 5-Axis Flank Milling Based on Faceted Models 04006 Gandjar Kiswanto, Ario Sunar Baskoro and Eko Arif Syaefudin Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804006 AbstractPDF (787 KB)References
Open Access The spray characteristic of gas-liquid coaxial swirl injector by experiment 04007 Chen Chen, Yan Zhihui, Yang Yang, Gao Hongli, Yang Shunhua and Zhang Lei Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804007 AbstractPDF (339 KB)References
Open Access Effect of contact angle and helix angle on slide-roll ratio under the uniform motion state of BSM 04008 Kong Deshun, Wang Min and Gao Xiangsheng Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804008 AbstractPDF (99.6 KB)References
Open Access Investigation on the design and the stiffness demonstration for a space square-truss deployable mast (STDM) 04009 Hai-jun Luo, Qi-feng Cui, Ming Li and Zhi-long Peng Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804009 AbstractPDF (312 KB)References
Open Access Design of a ferrochrome – slag mechanical separator case study 04010 Loice Keresia Gudukeya, Tawanda Mushiri and Charles Mbohwa Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804010 AbstractPDF (294 KB)References
Open Access Decoupling Analysis on Pressure Fluctuation and Needle Valve Response for High Pressure Common Rail Injector 04011 Wang Hao, Zhao Dongchang and Lv Wang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804011 AbstractPDF (531 KB)References
Open Access Analysis of windlass sprocket wheel intensity 04012 Yang-yang Shi, Zhi-ming Wang, Jian Zheng and Ning Zhang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804012 AbstractPDF (731 KB)References
Open Access Research and Application of Device for Simulation Sports Training based on Cycle Condition 04013 Jian Zhao Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804013 AbstractPDF (97.1 KB)References
Open Access Design of Pump as Turbine Experimental Test Facility 04014 D. L. Zariatin, Damora Rhakasywi, Fahzul Ade and Abdi Setyo Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804014 AbstractPDF (994 KB)References
Open Access Non Machinable Volume Calculation Method for 5-Axis Roughing Based on Faceted Models through Closed Bounded Area Evaluation 04015 Gandjar Kiswanto, Himawan Hadi Sutrisno and Jos Istiyanto Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804015 AbstractPDF (680 KB)References
Open Access A Method to Determine System Parameters of Sdof Structural Systems by Applying a Step Load 04016 Wenlung Li and Kuo-Ching Liu Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710804016 AbstractPDF (1.33 MB)References
Open Access Minimum Position Based on Robot’s Energy Consumption: A New Algorithm for Coordinated Multi-Robot Exploration 05001 Abdenour Benkrid and Noura Achour Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710805001 AbstractPDF (260 KB)References
Open Access Blood Velocity Estimation Based on an Optimal Observer for Magnetic Nanorobots Navigation 05002 Ton Duc Do Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710805002 AbstractPDF (442 KB)References
Open Access «Concurrency» in M-L-Parallel Semi-Markov Process 05003 Eugene Larkin and Alexey Ivutin Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710805003 AbstractPDF (136 KB)References
Open Access Modbus RTU protocol and arduino IO package: A real time implementation of a 3 finger adaptive robot gripper 05004 Amirul Syafiq Sadun, Jamaludin Jalani and Jumadi Abdul Sukor Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710805004 AbstractPDF (1.12 MB)References
Open Access Research on Miniature Calibre Rail-Guns for the Mechanical Arm 05005 Cao Ronggang, Zhang Guangwei and Su Ming Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710805005 AbstractPDF (252 KB)References
Open Access An Experimental Study on Operability of Master-Slave Manipulator System using Human–in–the-Loop Type Simulator 05006 Yosuke Tashiro, Hirofumi Ohtsuka and Tomohiro Kawahara Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710805006 AbstractPDF (634 KB)References
Open Access Preliminary Investigation of Micro-V-Bending 06001 Gandjar Kiswanto, Aida Mahmudah and Dedi Priadi Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710806001 AbstractPDF (959 KB)References
Open Access Rapid Time Response: A solution for Manufacturing Issue 06002 N. Norazlin, A.Y. Bani Hashim, M.H.F.M. Fauadi, Teruaki Ito and Zinvi Fu Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710806002 AbstractPDF (1.40 MB)References
Open Access A Study of Resin as Master Jewellery Material, Surface Quality and Machining Time Improvement by Implementing Appropriate Cutting Strategy 06003 Paryana Puspaputra Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710806003 AbstractPDF (2.67 MB)References
Open Access Cytotoxicity of three commercial orthodontic elastomeric ligature brands 06004 Peerapong Tua-ngam, Nittaya Jira-anankul, Niwat Anuwongnukroh, Surachai Dechkunakorn and Pasaree Laokijcharoen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710806004 AbstractPDF (1.68 MB)References
Open Access Detecting Attacks in CyberManufacturing Systems: Additive Manufacturing Example 06005 Mingtao Wu, Heguang Zhou, Longwang Lucas Lin, Bruno Silva, Zhengyi Song, Jackie Cheung and Young Moon Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710806005 AbstractPDF (1.90 MB)References
Open Access Empirical Study on the Measurement of the Technical Efficiency of Jilin Province’s Five High-tech Industries 06006 Jie Yao and Huan Ma Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710806006 AbstractPDF (218 KB)References
Open Access Analytical Investigation on the Damping Performance of Atorque Converter in an Automotive Driveline Model 07001 Pınar Sayın and Jürgen Schöftner Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710807001 AbstractPDF (1.65 MB)References
Open Access Based on the traffic system tools magneto electric equipment design and application 07002 Jian Sun, Lu Lyu, Yan Yang, Yan-ling Bai, Wen-li Jin, Yong Ren and Lin-lin Zhang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710807002 AbstractPDF (1.11 MB)References
Open Access Research on Fairing design and CFD Analysis of Submarine Pipeline Inspection ARV 07003 Xiaojian Jin, Shunqi Yang and Hai Chen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710807003 AbstractPDF (980 KB)References
Open Access Design and Modeling of a Novel Torque Vectoring Differential System 07004 Yu-Fan Chen, Heng-Chuan Hsu, Cheng-Ping Yang and Tyng Liu Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710807004 AbstractPDF (734 KB)References
Open Access Development of Strength Test System for Structure under Large Uniform Surface Load 07005 Yu Liu Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710807005 AbstractPDF (1.25 MB)References
Open Access Calculation Methodology of Power Plant Universal Cycle Using Low-grade Heat of Refrigerant 08001 S.V. Zaika, D.A. Uglanov and S.S. Dostovalova Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808001 AbstractPDF (438 KB)References
Open Access Optimal Power Flow-Based Calculation of Transmission Constraint Cost 08002 Soonhyun Hwang and Balho H. Kim Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808002 AbstractPDF (134 KB)References
Open Access A Study on the Optimal Fuel Mix and ESS Capacity considering Environmental Policy 08003 Seunghwan Lee, Soonhyun Hwang and Balho H. Kim Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808003 AbstractPDF (838 KB)References
Open Access Status Checking System of Home Appliances using machine learning 08004 Chi-Yurl Yoon and Shin-Gak Kang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808004 AbstractPDF (888 KB)References
Open Access Effects of Waste Plastic Oil Blends on a Multi Cylinder Spark Ignition Engine 08005 Kareddula Vijaya Kumar and Ravi Kumar Puli Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808005 AbstractPDF (1.13 MB)References
Open Access Control of 12-Cylinder Camless Engine with Neural Networks 08006 Moh’d Sami Ashhab Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808006 AbstractPDF (169 KB)References
Open Access Power Optimization Configuration for Piezoelectric Cantilever Arrays 08007 Bong Yu Jing and Kok Swee Leong Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808007 AbstractPDF (240 KB)References
Open Access Study on the Influence of Blade Roughnesson Axial Flow Compressor Stage Performance 08008 Xudong Shi, Hui Liu, Feiqi Long, Jie Tang and Liwen Wang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808008 AbstractPDF (794 KB)References
Open Access All-Coefficient Adaptive Control of Dual-Motor Driving Servo System 08009 Haibo Zhao and Chengguang Wang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808009 AbstractPDF (155 KB)References
Open Access Wind Turbine design and fabrication to power street lights 08010 Mohammad Khan, Mohammed Alavi, Nithin Mohan, Abid Azeez, Abdul Shanif and Bilal Javed Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808010 AbstractPDF (450 KB)References
Open Access Performance and Adaptive Surge-Preventing Acceleration Prediction of a Turboshaft Engine under Inlet Flow Distortion 08011 Dalu Cao, Hailong Tang and Min Chen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808011 AbstractPDF (685 KB)References
Open Access Geometric Optimization of Turbocharger Compressor and Its Influence on Engine Performance 08012 Fangming Zhang and Roland Baar Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710808012 AbstractPDF (1.14 MB)References
Open Access A Study on FIDO Authentication System for Reinforcing the Security of Electronic Medical Records 09001 Sujin Kim, Jinwoo Jung and Jungduk Kim Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710809001 AbstractPDF (623 KB)References
Open Access The Influence of Gate Scaling to Electrical Characteristics on n-MOS FinFET 09002 Nuttapong Patchrasardtra and Weera Pengchan Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710809002 AbstractPDF (197 KB)References
Open Access Full 3D Simulation of the New Closed Shell-Electrode Detector 09003 Mingfu Feng, Zheng Li, Manwen Liu and Lipeng Tang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710809003 AbstractPDF (877 KB)References
Open Access The Power Supply Module Design for Diesel Electronic Control Unit’s Lift Time Test System 09004 Jinguan Yin, Tiexiong Su, Xiaoyan Shen, Li Jia, Tao Liu and Hui Lv Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710809004 AbstractPDF (677 KB)References
Open Access Design of the patent evasion and rescue manipulator based on TRIZ 09005 Hong-liang Liu and Li-yan Chen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710809005 AbstractPDF (171 KB)References
Open Access 3D Simulation and Modeling of Ultra-fast 3D Silicon Detectors 09006 Manwen Liu, Zheng Li and Mingfu Feng Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710809006 AbstractPDF (2.62 MB)References
Open Access Characteristics of Timbers Dried Using Kiln Drying and Radio Frequency-Vacuum Drying Systems 10001 Zairul Amin Rabidin, Gan Kee Seng and Mohd Jamil Abdul Wahab Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810001 AbstractPDF (1.21 MB)References
Open Access Improved State Feedback H∞ Control for Flexible Air-Breathing Hypersonic Vehicles on LMI Approach 10002 Xue Zhang and Xiaogeng Liang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810002 AbstractPDF (348 KB)References
Open Access Air cooling analysis and design of impacted flexible actuator’s servo controller based on PLECS 10003 Mingjun Zhu, Liqun Xia, Yixue Hu, Wei Zhang, Duohong Ji and Xin Song Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810003 AbstractPDF (541 KB)References
Open Access Design and Implementation of A-SMGCS Based on ICE 10004 Jing Li, Xuguang Zhao, Min Wu, Ergai Yu, Li Jiang and Pengfeng Sheng Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810004 AbstractPDF (229 KB)References
Open Access Graphical user interface for input output characterization of single variable and multivariable highly nonlinear systems 10005 M. D. Shahrukh Adnan Khan, Sharsad Kara Kuni, G. K. M. Sadikul Amin and Mukul Agarwal Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810005 AbstractPDF (732 KB)References
Open Access Transformer fault diagnosis based on chemical reaction optimization algorithm and relevance vector machine 10006 Wei Luo, Minfang Peng, Xun Wan, Shengquan Wang and Xiupu Liao Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810006 AbstractPDF (378 KB)References
Open Access Responses’ Prediction Standard Error Analysis in Pareto Solutions 10007 Nuno Costa and João Lourenço Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810007 AbstractPDF (117 KB)References
Open Access A Function to Data Matrix (FDM) Approach for Mission Variables Consideration 10008 Mauricio Fernández-Montoya, Ricardo Mejía-Gutierrez and Gilberto Osorio-Gómez Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710810008 AbstractPDF (949 KB)References
Open Access Designing a Quenching System for Grinding Steel Balls - Case Study 11001 Loice Keresia Gudukeya and Charles Mbohwa Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710811001 AbstractPDF (659 KB)References
Open Access Sensible Performance Analysis of Multi-Pass Cross Flow Heat Exchangers 11002 Karthik Silaipillayarputhur, Tawfiq Al-Mughanam and Abdulelah I. Al-Niniya Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710811002 AbstractPDF (114 KB)References
Open Access Numerical Modelling of Evaporation Process in Cryogenic Systems 11003 A.A. Shimanov, D.A. Uglanov, D.V. Sarmin and A. B. Tsapkova Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710811003 AbstractPDF (546 KB)References
Open Access Development of Universal Exergy Analysis to the Selection of Cryogenic Cooling System 11004 S. V. Zaika, D. A. Uglanov and S. S. Dostovalova Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710811004 AbstractPDF (591 KB)References
Open Access Characterisation of the dynamic characteristics of a complex jointed structure 12001 M. S. A. Sulaiman, M. A. Yunus, M. N. Abdul Rani, A. Mohd Saman, Z. Mohamed and M.A.S. Aziz Shah Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710812001 AbstractPDF (1.14 MB)References
Open Access Molecular Clustering and Velocity Increase in Converging-Diverging Nozzle in MD Simulation 12002 Jeoungsu Na, Jaehawn Lee, Changil Hong and Suhee Kim Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710812002 AbstractPDF (1.03 MB)References
Open Access Interactions of double slanted cracks under mode I loading 12003 Al Emran Ismail, Muhd Hafeez Zainulabidin, Fazimah Mat Noor, Hanani Abd Wahab, Maznan Ismon, Zaleha Mohamad and Mohd Amran Madlan Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710812003 AbstractPDF (701 KB)References
Open Access A Relationship between Tyre Pressure and Rolling Resistance Force under Different Vehicle Speed 12004 Apiwat Suyabodha Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710812004 AbstractPDF (287 KB)References
Open Access The Effect of Position and Different Size of Radial Hole on Performance of Cannulated Pedicle Screw 13001 F. A. Zakaria, R. Daud, H. Mas Ayu, S. H. Tomadi, M. S. Salwani and Mohammed Rafiq Abdul Kadir Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813001 AbstractPDF (906 KB)References
Open Access Effect of using different types of methods for the derivation of elastic modulus of bone - A critical survey 13002 Zartasha Mustansar, Arslan Shaukat and Lee Margetts Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813002 AbstractPDF (175 KB)References
Open Access WheelWalker: a foot-wheel driving exoskeleton for the alternate walk of paraplegic patients 13003 Qingchuan Ma, Linhong Ji and Rencheng Wang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813003 AbstractPDF (1.14 MB)References
Open Access Modelling and Simulation of Vessel Surgery based on Mass-spring 13004 Da Ren, Yiming Chen, Bojun Lin, Fanjin Zeng, Jiaming Huang and Jinfeng Wang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813004 AbstractPDF (212 KB)References
Open Access The simulation for study of von Mises stress sensitiveness to the change of coronal conformity in knee prosthesis 13005 Usman and Shyh Chour Huang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813005 AbstractPDF (749 KB)References
Open Access Effect of Average Conformity on Contact Stresses in Total Knee Replacement: Finite Element Analysis 13006 Usman and Shyh Chour Huang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813006 AbstractPDF (639 KB)References
Open Access Development and validation of a C0-C7 cervical spine finite element model 13007 Wei Wei, Yin Liu, Xianping Du and Na Li Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813007 AbstractPDF (758 KB)References
Open Access Microfluidic Blood Typing Chip with Voltammetry Measurement 13008 Yaw-Jen Chang, Xin-Miao Zhou, Hsiu-Rong Yen and Chih-Ling Yeh Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813008 AbstractPDF (2.15 MB)References
Open Access Effect of the Periodontal Ligament of the Bilateral Support Teeth on the Stress Analysis of Dental Implant 13009 Yanhua Xie, Xi Lu, Jianrun Zhang and Beibei Sun Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710813009 AbstractPDF (2.93 MB)References
Open Access Influence of epoxy resin as encapsulation material of silicon photovoltaic cells on maximum current 14001 David Acevedo-Gómez, Alejandro Velásquez-López, Gilberto Osorio-Gómez and Ricardo Mejía-Gutiérrez Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710814001 AbstractPDF (367 KB)References
Open Access Improving energy performance power station of ship with integrated electric propulsion 14002 Andrey Dar’enkov, Ivan Samoyavchev, Oleg Khvatov and Valeriy Sugakov Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710814002 AbstractPDF (1.21 MB)References
Open Access Experimental research of variable rotation speed ICE-based electric power station 14003 Andrey Dar’enkov Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710814003 AbstractPDF (505 KB)References
Open Access Design of High Efficient MPPT Solar Inverter 14004 K. A. Sunitha, G Prem Kumar, Nidhi Priya and Jatin Verma Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710814004 AbstractPDF (202 KB)References
Open Access Copper-indium-gallium-diselenide nanoparticles synthesized by a solvothermal method for solar cell application 14005 Chuan-Sheng Chiou and Huan-Chih Penga Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710814005 AbstractPDF (644 KB)References
Open Access Application of solar photovoltaic generation in the world 14006 Zheng Hongxia, Tian Yuqing and Chen Deying Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710814006 AbstractPDF (96.9 KB)References
Open Access An Economic Solution to Optimize Performance of Photovoltaic Modules under Partial Shading 14007 Paoyuan Lin, Kok Chin Chai and Herchang Ay Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710814007 AbstractPDF (1.13 MB)References
Open Access Model-based Pose Estimation for Texture-less Objects with Differential Evolution Algorithm 15001 Linh Tao, Tinh Nguyen and Hiroshi Hasegawa Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710815001 AbstractPDF (295 KB)References
Open Access Automatic Puncture System Based on NIR Image and Ultrasonic Image 15002 Zhendong Qiao, Yuhe Li, Zhenhuan Wu and Jiahua Kou Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710815002 AbstractPDF (1.29 MB)References
Open Access Multi-UAV joint target recognizing based on binocular vision theory 15003 Zhang Yuan and Wang Jun Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710815003 AbstractPDF (1.25 MB)References
Open Access Research on group enterprise multimedia information publishing system 15004 Dong Zhimin Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710815004 AbstractPDF (779 KB)References
Open Access Comparison and Realization of Fast Acquisition Method for GPS Signal under High Dynamic 15005 Chan Zeng, Weimin Li, Bo Bi and Qiliang Chen Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710815005 AbstractPDF (222 KB)References
Open Access A numerical coupling model for a multibody system with multiple lubricated clearance joints 15006 Zhao Bo and Shen Fei Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710815006 AbstractPDF (1.39 MB)References
Open Access Analysis of displacements in beam structures and shells with middle developable surfaces 16001 Marina Rynkovskaya Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710816001 AbstractPDF (98.3 KB)References
Open Access Development of Constructions of Mobile Road Overpasses 16002 Adil Kadyrov, Aleksandr Ganyukov and Kyrmyzy Balabekova Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710816002 AbstractPDF (1.61 MB)References
Open Access Discrete element analysis of the excavation effect of cross-river tunnel on the surroundings 16003 Dongyuan Liu, Xiedong Zhang and Zhihua Zhang Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710816003 AbstractPDF (306 KB)References
Open Access Indonesian Maritime Logistics Network Optimization Using Mixed Integer Programming 17001 Komarudin Arry Rahmawan and Natasha Angelina Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710817001 AbstractPDF (635 KB)References
Open Access Logistics Indicators Could Improve Logistics Performance of Hospitals 17002 Andre M. R. Wajong Published online: 31 May 2017 DOI: https://doi.org/10.1051/matecconf/201710817002 AbstractPDF (166 KB)References