Open Access
Issue
MATEC Web Conf.
Volume 108, 2017
2017 International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2017)
Article Number 04003
Number of page(s) 5
Section Mechanical Engineering
DOI https://doi.org/10.1051/matecconf/201710804003
Published online 31 May 2017
  1. S.L. Ko, D.A. Dornfel, A Study on Burr Formation Mechanism, J. Eng. Mater, 113, pp.75–87, 1991.
  2. L.K. Gillespie, De-burring and Edge Finishing Handbook (SME, New York, 1999).
  3. L.K. Gillespie, The formation and properties of machining burrs, J. Manuf. Sci. E., 98, pp.66–74, 1976.
  4. R. Narayanaswami, D. Dornfeld, Burr minimization in face milling: a geometric approach, Trans ASME, J. Eng. Ind., 119, pp. 170–177.
  5. R. Narayanaswami, D. Dornfeld, Design and process planning strategies for burr minimization and deburring. Trans. NAMRi/SEM, 22, pp.313, 1994.
  6. D. Biermann, M. Steiner, Analysis of micro burr formation in austenitic stainless steel X5CrNi18-10, Procedia CIRP. 3, pp.97–102, 2012. [CrossRef]
  7. A. Toropov, L.K. Sung, A model of burr formation in the feed direction in turning, Int. J. Mach. Tool. Manu., 46, pp.1913–1920, 2006. [CrossRef]
  8. D. Le, J.M. Lee, S.J. Kim, et al., Burr analysis in micro-grooving, Int. J. Adv. Manuf. Tech. 50, pp.569–577, 2010. [CrossRef]
  9. K. Lee, D.A. Dornfeld, An experimental study on burr formation in micro milling aluminium and copper, Trans NAMRI/SME, 30, pp.255–262, 2002.
  10. L. Ravi, B. Vivek, K.S. Ramesh and S.S. Joshi, Characterization and modeling of burr formation in micro-end milling, Precis. Eng., 35, pp.625–637, 2011. [CrossRef]
  11. H. Liu, Y. Sun, Y. Geng and D. Shan, Experimental research of milling force and surface quality for TC4 titanium alloy of micro-milling, Int. J. Adv. Manuf. Technol., 79, pp.705–716, 2015. [CrossRef]
  12. T. Thepsonthi, T. Özel, Multi-objective process optimization for micro-end milling of Ti-6Al-4V titanium alloy, Int. J. Adv. Manuf. Technol., 63, pp.903–914, 2012. [CrossRef]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.