| Issue |
MATEC Web Conf.
Volume 108, 2017
2017 International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2017)
|
|
|---|---|---|
| Article Number | 04003 | |
| Number of page(s) | 5 | |
| Section | Mechanical Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201710804003 | |
| Published online | 31 May 2017 | |
Formation and Control Technology of Top Burr in Micro-Milling
School of Mechanical Engineering, Jiangsu University, Zhenjiang, China
Burr formed during micro-milling slot has the most direct effect on surface quality and dimension accuracy of work-piece. Compared with other positional burrs, top burrs having the biggest dimension make the subsequent de-burring operation more difficult. To analyze the effect of spindle speed, cutting depth , feeding per teeth and blade radius on top burr size, Al6061-T6, used as research object, was conducted on a 5-axis machining center with the single factor method. Effect regularities of the process parameters on burr dimension were preliminarily revealed, active control of burr dimension during micro milling operation could be possible on the basis of the experiment.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.