Open Access
Issue
MATEC Web Conf.
Volume 108, 2017
2017 International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2017)
Article Number 16001
Number of page(s) 4
Section Civil and Structural Engineering
DOI https://doi.org/10.1051/matecconf/201710816001
Published online 31 May 2017
  1. Ogibalov P.M., Koltunov M.A., Shells and Plates, Moscow Univ., 695pp. (1969). [Google Scholar]
  2. Karmishin A.V., Lyaskovets V.A., Myachenkov V.I., Frolov A.N., Statics and dynamics of thin-wall shell-type structures, Moscow, Mashinoctroenie, 376 pp. (1975). [Google Scholar]
  3. Valishvili N.V., Methods of analyzing shells of revolution on a digital computer, Mashinostroenie, 279pp. (1976). [Google Scholar]
  4. Timoshenko S.P., Woinowsky-Krieger S. Theory of Plates and Shells, New York, McGrawHill, 595pp (1959). [Google Scholar]
  5. Krivoshapko S.N., Parabolic bending of thin elastic plane or developable half-finished products into developable shell, Structural Mechanics of Engineering Constructions and Buildings, Vol. 12, P. 12–19 (2003). [Google Scholar]
  6. Krivoshapko S.N., Gbaguidi G.L.A., Developable shell products made by parabolic bending of thin metal slabs, Journal of the Ghana Institution of Engineers, Vol. 6&7, № 1, p. 51–56 (2009). [Google Scholar]
  7. Elenitsky E.Ya., Boundary value problem for the flexible axially loaded compound shells of revolution and beams systems, Vestnik of Samara State Techn. Univ. (Techn. Scien. Series), 4 (29), pp. 122–130, (2012). [Google Scholar]
  8. Krivoshapko S.N., Structural Mechanics: theory and practice, 2 edit., Moscow, Urait, 392 pp. (2014). [Google Scholar]
  9. Krivoshapko S.N., Ivanov V.N., Encyclopedia of Analytical Surfaces, Springer International Publishing Switzerland, 752 pp. (2015). [Google Scholar]
  10. Haeberli P., Modeling and fabrication of objects represented as developable surfaces, US Patent 6493603, USA (2002). [Google Scholar]
  11. Rynkovskaya M.I., Analytical Methods of Analysis of Right and Open Helicoids, ASEE 2009 Conference: Engineering in the New Global Economy, USA, (2009). [Google Scholar]
  12. Liua Y.-J., Tangb K., Gongc W.-Y., Wuc T.-R., Industrial design using interpolatory discrete developable surfaces, Computer-Aided Design, Vol. 43, Iss. 9, p. 1089–1098 (2011). [CrossRef] [Google Scholar]
  13. Krivoshapko S.N., Geometry of Ruled Surfaces with Edge of Regression and Linear Theory of Analysis of Developable Shells, Monograph, Izd-vo RUDN, 357pp. (2009). [Google Scholar]
  14. Krivoshapko S.N., Static analysis of shells with developable middle surfaces, Appl. Mech. Rev., vol. 51, №12, Part 1, pp. 731–746 (1998). [CrossRef] [Google Scholar]
  15. Redont P., Representation and deformation of developable surfaces, Computer Aided Geometric Design, Vol. 21 (1), p. 13–20 (1989). [CrossRef] [Google Scholar]
  16. Oetter R., Barry C.D., Duffty B., Welter J., Block Construction of Small Ships and Boats Through Use of Developable Panels, Journal of Ship Production, Vol. 18, №2, p. 65–72 (2002). [Google Scholar]
  17. Steel-Chalfant J., Analysis and design of developable surfaces for shipbuilding, Master’s thesis (1997). [Google Scholar]
  18. Gotman A.S., Use of Developable Surfaces for Designing Well-Stream Shapes, Oceanic Engineering International, Vol. 9, NUMB 2, p. 81–96 (2005). [Google Scholar]
  19. Koschitz D., Demaine E.D., Demaine M.L., Curved Crease Origami, Abstracts from Advances in Architectural Geometry (AAG 2008), p. 29–32 (2008). [Google Scholar]
  20. Tevfik A., Ahmet K., Ergun A., Developable sculptural forms of Ilman Koman, Tarquin Publications, London (2006). [Google Scholar]
  21. Solomon J., Vouga E., Wardetzky M., Grinspun E., Flexible Developable Surfaces. Computer Graphics Forum, Vol. 31, Iss. 5, p. 1567–1576 (2015). [CrossRef] [Google Scholar]
  22. Yoon J.S., Ryu C., Lee J.H., Developable polynomial surface approximation to smooth surfaces for fabrication parameters of a large curved shell plate by Differential Evolution, Computer-Aided Design, V. 40, Iss. 9, p. 905–915 (2008). [CrossRef] [Google Scholar]
  23. Xia M., Yan Q., Zuo D., Xie J., An investigation on multistage bending of blank sheet into cylindrical tube by experiment and numerical simulation, Int. J. of Adv. Manuf. Tech., Vol. 53, Iss. 1-4, p. 145–155 (2011). [CrossRef] [Google Scholar]
  24. Kilian M., Flory S., Chen Z., Mitra N.J., Sheffer A., Pottman H., Curved Folding, ACM Transactions on Graphics (TOG), Vol. 27, Iss. 3, Article № 75 (2008). [CrossRef] [Google Scholar]
  25. Rose K., Sheffer A., Wither J., Cani M.-P., Thibert B., Developable Surfaces from Arbitrary Sketched Boundaries, SGP ‘07 Proceedings of the fifth Eurographics symposium on Geometry processing. P. 163–172 (2007). [Google Scholar]
  26. Dias M. A., Dudte L. H., Mahadevan L., Santangelo C. D., Geometric Mechanics of Curved Crease Origami, Physical Review Letters 109, 114301 (2010). [Google Scholar]
  27. Jung A., Hahmann S., Rohmer D., Begault A., Boissieux L., Cani M.-P., Sketching Folds: Developable Surfaces from Non-Planar Silhouettes, ACM Transactions on Graphics (TOG), Vol. 34, Iss. 5, Article No. 155 (2015). [CrossRef] [Google Scholar]
  28. M. Rynkovskaya. Plastic deformations in the shells with developable middle surfaces while bending, ICONTES 2016 (to be published). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.