Open Access
MATEC Web Conf.
Volume 108, 2017
2017 International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2017)
Article Number 06001
Number of page(s) 5
Section Modern Manufacturing
Published online 31 May 2017
  1. Qin, Y., Micro-forming and miniature manufacturing systems—development needs and perspectives. Journal of Materials Processing Technology, 177(1–3): p. 8–18 (2006) [CrossRef] [Google Scholar]
  2. Gau, J.-T., C. Principe, and M. Yu, Springback behavior of brass in micro sheet forming. Journal of Materials Processing Technology, 191(1–3): p. 7–10, (2007) [CrossRef] [Google Scholar]
  3. Diehl, A. U. Engel, and M. Geiger, Influence of microstructure on the mechanical properties and the forming behaviour of very thin metal foils. The International Journal of Advanced Manufacturing Technology, 47(1–4): p. 53–61 (2010) [CrossRef] [Google Scholar]
  4. Liu, J., et al., Influence of size effect on the springback of sheet metal foils in micro-bending. Computational Materials Science, 50(9): p. 2604–2614 (2011) [CrossRef] [Google Scholar]
  5. Ma, Z., et al., Grain size effect on springback behavior in bending of Ti-2.5Al-1.5Mn foils. Journal of Materials Processing Technology, 224: p. 11–17. (2015) [CrossRef] [Google Scholar]
  6. Chen, C.-C. and C.-P. Jiang, Grain Size Effect in the Micro-V-Bending Process of Thin Metal Sheets. Materials and Manufacturing Processes, 26(1): p. 78–83 (2011) [CrossRef] [Google Scholar]
  7. Zhu, H.X. and B.L. Karihaloo, Size-dependent bending of thin metallic films. International Journal of Plasticity, 24(6): p. 991–1007 (2008) [CrossRef] [Google Scholar]
  8. Hezong, L., et al., Determination of material intrinsic length and strain gradient hardening in microbending process. International Journal of Solids and Structures, 48(1): p. 163–174 (2011) [Google Scholar]
  9. R. Ahmet Parasiz, S., VanBenthysen, and B.L. Kinsey, Deformation size effects due to specimen and grain size in microbending. Journal of manufacturing science and engineering, 132(1) (2010) [Google Scholar]
  10. Li, H.-z., et al., Analysis of microbending of CuZn37 brass foils based on strain gradient hardening models. Journal of Materials Processing Technology, 212(3): p. 653–661 (2012) [CrossRef] [Google Scholar]
  11. Fang, Z., et al., Study on springback in micro V-bending with consideration of grain heterogeneity. The International Journal of Advanced Manufacturing Technology, 78(5–8): p. 1075–1085 (2015) [CrossRef] [Google Scholar]
  12. Huang, Z.-y. H., Zhang, and F. Ruan, Control Method of the Spring Back in Bending Micro and Precise Stamping Parts, in Proceedings of the 2009 International Conference on Measuring Technology and Mechatronics Automation - Volume 01 2009, IEEE Computer Society. p. 782–784. [CrossRef] [Google Scholar]
  13. Zheng, Q. T. Shimizu, and M. Yang, Scale effect on springback behavior of pure titanium foils in microbending at elevated temperature. Journal of Materials Processing Technology, 230: p. 233–243, (2016) [CrossRef] [Google Scholar]
  14. Boljanovic, V., Sheet Metal Forming Process and Die Design. New York: Industrial Press Inc. 184. (2004) [Google Scholar]
  15. Kiswanto, G., A. Mahmudah, and S. Supriadi. Development and Testing of 5 kN Micro Forming Machine for Micro Part Manufacturing. in 13th Quality in Research. Yogyakarta, Indonesia, (2013) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.