MATEC Web of Conferences

Open Access

Modeling and calculation of hydromechanical systems dynamics based on the volume rigidity theory 01001

Alexander T. Rybak, Mikhail P. Shishkarev, Alexander A. Demyanov and Viktor P. Zharov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601001

• Abstract
• PDF (389.6 KB)
• References

Open Access

Ways to reduce the error of additive methods of forming 01002

Alexander N. Grechukhin, Vadim V. Kuts and Michail S. Razumov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601002

• Abstract
• PDF (208.5 KB)
• References

Open Access

Experimental studies of ride quality of selfpropelled combine harvester 01003

Pavel V. Sirotin, Aleksandr G. Sapegin and Sergey V. Zlenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601003

• Abstract
• PDF (2.978 MB)
• References

Open Access

Management of space orientation of the end effector of generation of geometry system fiveaxis manufacturing machinery for additive generation of geometry 01004

Alexander N. Grechukhin, Ivan S. Anikutin and Alexander S. Byshkin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601004

• Abstract
• PDF (401.0 KB)
• References

Open Access

Evaluation of tribological properties of components of polymer composite selflubricating materials 01005

Kirill N. Dolgopolov and Dmitry N. Lyubimov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601005

• Abstract
• PDF (1.642 MB)
• References

Open Access

Tribological properties of experimental hard alloys in conditions of friction on structural steel without lubricant 01006

Evgeniy V. Fominoff, Constantine G. Shuchev, Igor A. Khozyaev, Yuriy A. Tsarev and Viktor B. Rykov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601006

• Abstract
• PDF (176.6 KB)
• References

Open Access

Method for calculating the power of a rotor-screw machines 01007

Valeriy A. Lebedev, Georgy V. Serga, Irina V. Davydova, Tatiana V. Atoyan, Irina G. Koshlyakova and Alexander V. Gordienko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601007

• Abstract
• PDF (1.222 MB)
• References

Open Access

Main trends in intensification of rotor-screw processing of parts 01008

Valeriy A. Lebedev, Georgy V. Serga, Irina V. Davydova, Tatiana V. Atoyan, Irina G. Koshlyakova and Alexander V. Gordienko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601008

• Abstract
• PDF (682.4 KB)
• References

Open Access

The active working shoot modeling profile of the centrifugal microturbine 01009

Nikolai N. Efimov, Sergei V. Skubienko, Vadim V. Kopitsa, Igor Y. Kolodyazhny, Evgeny A. Anisimov and Ivan I. Ermakov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601009

• Abstract
• PDF (1.838 MB)
• References

Open Access

Analysis of wet-steam microturbine self-regulation characteristics 01010

Nikolai N. Efimov, Sergei V. Skubienko, Vadim V. Kopitsa, Dmitry V. Stepovoy, Alexander D. Ovechkin and Vasiliy N. Baltyan

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601010

• Abstract
• PDF (1.433 MB)
• References

Open Access

Experimental studies of hole drilling operations in stress-strain workpiecematerial 01011

Vadim V. Kuts, Mikhail S. Razumov and Aleksandr S. Byshkin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601011

• Abstract
• PDF (1.334 MB)
• References

Open Access

Structural and kinematic analysis of a stirred tank planetary drive 01012

Alexander A. Prikhodko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601012

• Abstract
• PDF (400.4 KB)
• References

Open Access

Stability of a composite thick plate with an inhomogeneous field of initial stresses 01013

Vadim V. Eremeev, Natalia Y. Shubchinskaya, Denis V. Ivashchenko and Vsevolod A. Minko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601013

• Abstract
• PDF (407.8 KB)
• References

Open Access

Buckling of a composite bar made of a functional-gradient material with an inhomogeneous pre-stress field 01014

Vadim V. Eremeev and Denis V. Ivashchenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601014

• Abstract
• PDF (440.3 KB)
• References

Open Access

Modification of gas-thermal coatings surface by continuous-generation laser radiation 01015

Evgeniy A. Chaschin, Konstantin I. Kurganov, Andrey A. Mitrofanov, Andrey H. Kharakhashev and Mikhail M. Klimov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601015

• Abstract
• PDF (417.0 KB)
• References

Open Access

Dynamic models of cultivator spring tine performance 01016

Oleg A. Polushkin, Vitalyi I. Ignatenko, Ivan V. Ignatenko, Ivan L. Vyalikov and Vitaliy P. Bogdanovich

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601016

• Abstract
• PDF (571.8 KB)
• References

Open Access

Projection of the hydraulic pressure drive with application of partial synthesis 01017

Alexander T. Rybak, Alexey Yu. Pelipenko, Mikhail P. Shishkarev and Marina Yu. Nevzorova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601017

• Abstract
• PDF (498.7 KB)
• References

Open Access

Research of micro and nano profile surface morphology of vibrational mechanical and chemical zinc coating 01018

Vladimir V. Ivanov, Nikolay P. Pogorelov, Mikhail F. Selemenev and Artem A. Sakunov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601018

• Abstract
• PDF (7.175 MB)
• References

Open Access

Mechanical analysis of vibratory conveyor mechanism 01019

Yerlan Yeleukulov, Alfiya Atalykova, Algazy Zhauyt, Zhubanyshbay Abdimuratov, Saltanat Yussupova, Assel Alik and Gaukhar Kenzhebayeva

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601019

• Abstract
• PDF (2.218 MB)
• References

Open Access

Dynamics and rigidity of a manipulator with three DOFs 01020

Serikbay Kosbolov, Yerlan Yeleukulov, Alfiya Atalykova, Algazy Zhauyt, Gulsara Yestemessova and Saltanat Yussupova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601020

• Abstract
• PDF (3.648 MB)
• References

Open Access

Achievement of required surface roughnesses in complex profile channels by dynamic combined processing 01021

Alexander I. Boldyrev, Gennady A. Sukhochev, Alexander A. Boldyrev, Denis V. Silaev and Vasily N. Sokolnikov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601021

• Abstract
• PDF (341.5 KB)
• References

Open Access

Method and description of dynamic vibration reduction in cabins of gantry cranes 01022

Kirill O. Kobzev, Sergey A. Shamshura, Alexander N. Chukarin, Vitaliy P. Bogdanovich and Valeriy E. Kasyanov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601022

• Abstract
• PDF (70.04 KB)
• References

Open Access

Substantiation of the parameters of vibration systems in the cab of the gantry crane at the workplace of crane operators 01023

Kirill O. Kobzev, Sergey A. Shamshura, Alexander N. Chukarin, Alexey I. Buryanov and Valeriy E. Kasyanov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601023

• Abstract
• PDF (134.5 KB)
• References

Open Access

Influence of irradiation on the dynamics of changes in the mechanical properties of the nuclear reactor vessel 01024

Yulia S. Bakhracheva

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601024

• Abstract
• PDF (80.59 KB)
• References

Open Access

Optimization of the flat stock cutting process by hydroabrasive jet 01025

Mikhail A. Tamarkin, Victor I. Butenko, Albert N. Isaev and Elena V. Murugova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601025

• Abstract
• PDF (977.4 KB)
• References

Open Access

Technological effect of processing with the organic granular media flows 01026

Yevgeniy Y. Krupenya, Marina A. Boyko and Antonina P. Shishkina

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601026

• Abstract
• PDF (151.2 KB)
• References

Open Access

Assessment of integrated index of environmental units of the transport system 01027

Gennady I. Shulga, Alex O. Kolesnichenko, Eugene V. Skrynnikov, Tatiana G. Shulga and Maxim A. Vasilyev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601027

• Abstract
• PDF (320.7 KB)
• References

Open Access

Optimization of technology for production of products of deep drawing sheet steels with the use of lubricants in universal software system ANSYS workbench 01028

Gennady I. Shulga, Alex O. Kolesnichenko, Paul V. Sirotin, Ilya Yu. Lebedyns’kyi, Eugene V. Skrynnikov and Maxim A. Vasilyev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601028

• Abstract
• PDF (706.0 KB)
• References

Open Access

Experimental study of reclining the cultivator’s paws on spring racks 01029

Alexey I. Buryanov, Vitaliy I. Ignatenko, Ivan V. Ignatenko and Ivan L. Vyalikov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601029

• Abstract
• PDF (480.8 KB)
• References

Open Access

Combined strengthening treatment of welded joints of metal pipes of large diameter 01030

Viktor I. Butenko, Albert N. Isaev, Tatiana M. Bagdasaryan and Alexander A. Cherepenjko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601030

• Abstract
• PDF (342.9 KB)
• References

Open Access

Numerical cam profile design with tappet constant speed section in internal combustion engine valve gear and fuel system 01031

Alexander Vasilyev and Yulia Bakhracheva

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822601031

• Abstract
• PDF (353.0 KB)
• References

Open Access

Processing parameters influence on dynamics of vibratory drilling with adaptive control 02001

Ilya I. Ivanov and Sergey A. Voronov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602001

• Abstract
• PDF (1.318 MB)
• References

Open Access

Influence of technological system’s rigidity on the dynamics of grinding process of flexible parts 02002

Sergey A. Voronov, Igor A. Kiselev and Weidong Ma

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602002

• Abstract
• PDF (1.850 MB)
• References

Open Access

Justification of the mathematical (thermodynamic) model of deformation processes in the materials cutting system 02003

Natalia Neumoina, Alexander Ivashchenko and Alexander Belov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602003

• Abstract
• PDF (409.9 KB)
• References

Open Access

Investigation of stationary trajectories with associated milling by spur gears 02004

Alexandra A. Gubanova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602004

• Abstract
• PDF (107.2 KB)
• References

Open Access

Measuring system for liquid level determination based on linear electro-optical effect of liquid crystal 02005

Olga Denisova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602005

• Abstract
• PDF (351.5 KB)
• References

Open Access

Effects of deformation dynamics in problems of heavy transport 02006

Sergei V. Nosachev, Mikhail V. Chuveiko, Maria Yu. Zhukova, Gennadiy A. Kuzin and Igor A. Khozyaev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602006

• Abstract
• PDF (254.3 KB)
• References

Open Access

Design controler of the quasi-time optimization approach for stabilizing and trajectory tracking of inverted pendulum 02007

Nguyen Xuan Chiem and Hai Nguyen Phan

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602007

• Abstract
• PDF (679.4 KB)
• References

Open Access

Contact models verification by the finite element model updating method based on the calculation of the sensitivity coefficient 02008

Vladimir Zhulev and Michail Kuts

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602008

• Abstract
• PDF (730.7 KB)
• References

Open Access

Synergies in control of the cutting processes 02009

Vilor Zakovorotny and Valery Gvindjiliya

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602009

• Abstract
• PDF (107.4 KB)
• References

Open Access

The change of the properties of the turning process by introducing vibrations in the cutting zone 02010

Vilor Zakovorotny and Valery Gvindjiliya

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602010

• Abstract
• PDF (523.3 KB)
• References

Open Access

Experimental evaluation of the influence of tool wear on the temperature in the cutting zone during the turning of metals 02011

Viktor P. Lapshin, Tatiana S. Babenko, Valentin S. Minakov and Sergey I. Kambulov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602011

• Abstract
• PDF (4.891 MB)
• References

Open Access

Adaptation of the control synthesized by the ACAR method to the control based on the implementation of the maximum principle 02012

Viktor P. Lapshin, Ilya A. Turkin, Alexey A. Zakalyuzhnyy, Viktor F. Khlystunov and Gennadiy A. Kuzin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602012

• Abstract
• PDF (388.8 KB)
• References

Open Access

Approaches to adaptive control of smoke removal rooflight based on mathematical modelling 02013

Aleksandr V. Pilipenko, Daniil A. Zolotukhin and Anastasia Y. Pilipenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602013

• Abstract
• PDF (777.7 KB)
• References

Open Access

Adaptive drive of the technological machine with two working movements of the executive body 02014

Mikhail A. Lemeshko, Mikhail D. Molev and Alexey G. Iliev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602014

• Abstract
• PDF (434.4 KB)
• References

Open Access

Review of robotic manipulators and identification of the main problems 02015

Ksenia I. Goryanina, Aleksndr D. Lukyanov and Oleg I. Katin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602015

• Abstract
• PDF (85.98 KB)
• References

Open Access

Analysis and solution of problems in the development of automatic color sorting systems 02016

Oleg I. Katin, Ksenia I. Goryanina and Miroslav A. Vernezi

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602016

• Abstract
• PDF (561.8 KB)
• References

Open Access

Mathematical modeling and parametric identification of dynamic properties of mechanical subsystems tool and workpiece in turning process 02017

Pham Dinh Tung

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602017

• Abstract
• PDF (223.5 KB)
• References

Open Access

The effect of parametric excitation on a dynamic system of cutting process 02018

Pham Dinh Tung and Nguyen Dong Ahn

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602018

• Abstract
• PDF (244.3 KB)
• References

Open Access

Modelling a complex technical system of greenhouse production: the foundations of an interdisciplinary approach 02019

Evgeniya P. Klyuchka, Viktor V. Radin, Leonid M. Groshev and Valeriy P. Maksimov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602019

• Abstract
• PDF (82.19 KB)
• References

Open Access

Problems of modeling of complex technological systems of greenhouse production 02020

Evgeniya P. Klyuchka, Viktor V. Radin, Leonid M. Groshev and Sergey I. Kambulov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602020

• Abstract
• PDF (141.0 KB)
• References

Open Access

Multiphysical mathematical models for design, identification and diagnostics of high-precision positioning systems 02021

Anton M. Lankin, Mariya Y. Lankina and Mikhail V. Lankin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602021

• Abstract
• PDF (1.086 MB)
• References

Open Access

Formalization of dynamic model of pneumatic drive with variable structure 02022

Elena N. Obukhova, Vyacheslav I. Grishchenko and Grigoriy A. Dolgov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602022

• Abstract
• PDF (154.6 KB)
• References

Open Access

Optimization of solar energy conversion power plant parameters 02023

Pavel S. Obukhov and Nikita V. Kiselev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602023

• Abstract
• PDF (514.0 KB)
• References

Open Access

Development of software monitoring module for multi-angle electric impedance tomography method research 02024

Grayr K. Aleksanyan, Ivan D. Shcherbakov, Artem I. Kucher and Andrey V. Sulyz

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602024

• Abstract
• PDF (192.3 KB)
• References

Open Access

Development of a power supply for multi-angle electric impedance tomography complex 02025

Grayr K. Aleksanyan, Ivan D. Shcherbakov, Artem I. Kucher and Evgeniy A. Volchenkov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602025

• Abstract
• PDF (552.6 KB)
• References

Open Access

Identification and diagnosis of high-precision positioning systems using the principal components method 02026

Anton M. Lankin, Mariya Y. Lankina and Mikhail V. Lankin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602026

• Abstract
• PDF (81.69 KB)
• References

Open Access

Study of the industrial contaminations containing hydrocarbon components and their effect on correlation of protective properties of textiles for clothes 02027

Irina Cherunova, Elena Yakovleva and Ekaterina Stefanova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602027

• Abstract
• PDF (131.5 KB)
• References

Open Access

Optimization of parameters of the electromechanical converter with a discrete secondary part 02028

Denis Kuimov, Alexandr Pavlenko and Maksim Minkin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602028

• Abstract
• PDF (1.118 MB)
• References

Open Access

Development of the principles of mathematical modelling and management of behaviour of fine dust fractions of various nature in non-uniform electric field 02029

Maksim Minkin and Denis Kuimov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602029

• Abstract
• PDF (1.638 MB)
• References

Open Access

Simulation, identification and dynamic control of the luminaire of the synthesized spectrum 02030

Alexander Lukyanov, Danila Donskoy and Miroslav Vernezi

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822602030

• Abstract
• PDF (409.4 KB)
• References

Open Access

Creating new technically stable building structures from composite materials 03001

Tatiana P. Kasharina

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603001

• Abstract
• PDF (486.8 KB)
• References

Open Access

Influence of electromagnetic effect parameters on ferromagnetic powders fluidity 03002

Ivan N. Egorov and Nikolay Ya. Egorov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603002

• Abstract
• PDF (509.7 KB)
• References

Open Access

A combined application of the boundary element method and Lobatto time-stepping procedure in 3-D partially saturated poroelastic problems 03003

Andrey I. Petrov and Aleksandr A. Belov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603003

• Abstract
• PDF (1.474 MB)
• References

Open Access

Boriding of steel surface with beams of boron atoms 03004

Yuri F. Migal and Andrey V. Sidashov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603004

• Abstract
• PDF (408.8 KB)
• References

Open Access

Development of the Paris-Erdogan model for the quantitative evaluation of the wear resistance of materials under dynamic contact with a discrete liquid-drop flow 03005

Valery N. Varavka, Oleg V. Kudryakov, Natalia I. Bronnikova, Igor Yu. Zabiyaka and Vladilen V. Rubanov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603005

• Abstract
• PDF (1.339 MB)
• References

Open Access

Features of destruction of a ferrite-martensitic composite 03006

Viktor N. Pustovoit, Valentina V. Duka, Yuri V. Dolgachev, Ludmila P. Aref’eva, Vladislav V. Fedosov and Viktoria M. Salynskih

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603006

• Abstract
• PDF (444.0 KB)
• References

Open Access

Microarc surface alloying of tool steels 03007

Makar S. Stepanov, Yuri M. Dombrovskii and Levon V. Davidyan

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603007

• Abstract
• PDF (3.549 MB)
• References

Open Access

Investigation of the phase structure and surface morphology of the titanium nano-structured coatings for dental implants deposited by the method of magnetron sputtering 03008

Vladimir A. Gevorgyan, Alexander A. Dolgalev, Vitaliy A. Tarala, Naira R. Mangasaryan and Boris V. Buchalov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603008

• Abstract
• PDF (2.388 MB)
• References

Open Access

Features wetting and anisotropy of interfacial energy in a metal particle-silicon system 03009

Ludmila P. Aref’eva, Andrey V. Blinov, Alexander A. Kravtsov, Irina G. Shebzukhova and Alexander V. Serov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603009

• Abstract
• PDF (148.8 KB)
• References

Open Access

Properties of biocomposite on the “bone-tocarbon nano implant” border 03010

George Sh. Golubev, Michael B. Rodin and Vladimir A. Irkha

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603010

• Abstract
• PDF (1.102 MB)
• References

Open Access

Synthesis of bioactive materials for implants in the system Ca₃(PO₄)₂-Ca₂GeO₄ 03011

Elizaveta A. Mukhanova, Vyacheslav G. Vetokhin and Alexander A. Rybalkin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603011

• Abstract
• PDF (333.8 KB)
• References

Open Access

Effect of the molecular weight of polyvinylpyrrolidone on the structure and morphology of materials based on substituted hydroxyapatite for bone implants 03012

Elizaveta A. Mukhanova, Inna A. Suprunova, Yana A. Suprunova and Igor Yu. Zabiyaka

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603012

• Abstract
• PDF (1.032 MB)
• References

Open Access

A penny-shaped crack in a functionally graded layer between two half-spaces with different elastic properties 03013

Leonid I. Krenev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603013

• Abstract
• PDF (87.67 KB)
• References

Open Access

Modification of the titanium implants surface with TiO2 coatings obtained by sol-gel method via dip-coating 03014

Vitaly A. Tarala, Alexander A. Dolgalev, Alexander A. Kravtsov, Irina S. Chikulina and Boris V. Bukhalov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603014

• Abstract
• PDF (4.578 MB)
• References

Open Access

Phenomenological description of structural changes of the surface layers in a metalpolymer friction pair 03015

Igor V. Kolesnikov, Pavel G. Ivanochkin and Tatyana A. Ivanochkina

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603015

• Abstract
• PDF (383.8 KB)
• References

Open Access

The study of the tribological, thermal and physical properties of phenylone C-2 based composites containing nonstoichiometric molybdenum and tungsten oxides 03016

Ksenija I. Karpenko, Evgeniy S. Novikov, Sergey A. Danilchenko and Viktor V. Avilov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603016

• Abstract
• PDF (407.4 KB)
• References

Open Access

Hole drilling and milling of magnetic alloys parts by shaped tube electrolytic machining 03017

Vladimir V. Glebov, Irina N. Danilenko and Ruslan I. Ratushinsky

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603017

• Abstract
• PDF (707.2 KB)
• References

Open Access

Contact problem on indentation of an elastic half-plane with functionally-graded coating in presence of tangential stresses on the surface 03018

Sergei S. Volkov, Andrey S. Vasiliev and Evgeniy V. Sadyrin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603018

• Abstract
• PDF (87.37 KB)
• References

Open Access

Tribology properties of hybrid graphene oxide materials as lubricant additives 03019

Anastasia A. Novikova, Victoria E. Burlakova, Valery N. Varavka, Tatyana G. Statsenko, Grigory B. Kharitonov and Vladilen V. Rubanov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603019

• Abstract
• PDF (547.8 KB)
• References

Open Access

On the peculiarities of anti-plane surface waves propagation for media with microstructured coating 03020

Victor A. Eremeyev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603020

• Abstract
• PDF (75.20 KB)
• References

Open Access

Evaluation of fatigue life of polycrystalline structural alloys 03021

Ivan A. Volkov, Leonid A. Igumnov and Aleksandr A. Ipatov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603021

• Abstract
• PDF (398.0 KB)
• References

Open Access

Dynamics of a vibration system, taking into account the hereditary type friction and the mobility of a vibration limiter 03022

Vladimir S. Metrikin, Leonid A. Igumnov, Mikhail V. Zaitsev and Aleksandr V. Boev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603022

• Abstract
• PDF (1.138 MB)
• References

Open Access

Numerical analysis of influence of length of the working part of specimen on dynamic diagrams of constructional materials obtained by the Kolsky method 03023

Alexander Yu. Konstantinov, Artem V. Basalin, Mikhail E. Gonov and Andrey R. Filippov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603023

• Abstract
• PDF (176.3 KB)
• References

Open Access

Experimental complexes for investigation of behavior of materials at a strain rate of 5·10²÷10⁵ s^-1 03024

Anatoly M. Bragov, Alexander Y. Konstantinov, Andrei K. Lomunov, Tatyana N. Yuzhina and Andrey R. Filippov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603024

• Abstract
• PDF (474.8 KB)
• References

Open Access

Investigation of the effect of some organic compounds on the formation of an antifriction film in a dioctyl sebacate medium 03025

Igor V. Kolesnikov, Konstantin S. Lebedinskii and Mikhail V. Boiko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603025

• Abstract
• PDF (862.0 KB)
• References

Open Access

Computational model of the deformation of graded wedge with complicated structure 03026

Irina S. Trubchik, Ludmila N. Evich and Evgenii N. Ladosha

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603026

• Abstract
• PDF (164.5 KB)
• References

Open Access

On a method for determination of Poisson’s ratio and Young modulus of a material 03027

Vladimir B. Zelentsov, Evgeniy V. Sadyrin, Aleksandr G. Sukiyazov and Nataliya Yu. Shubchinskaya

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603027

• Abstract
• PDF (1.262 MB)
• References

Open Access

Investigation of the processes of separation and spread of welding aerosols taking into account various types of heat and mass transfer to ensure safe welding conditions in confined space 03028

Yuriy I. Bulygin, Dmitriy V. Rogozin, Irina S. Kuptsova, Natalia N. Azimova and Viktor F. Khlystunov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603028

• Abstract
• PDF (1.644 MB)
• References

Open Access

Research of nanoscale titanium carbides influence on the structure and properties of weld metal in automatic submerged arc welding 03029

Nikolay V. Kobernik and Alexander S. Pankratov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603029

• Abstract
• PDF (539.1 KB)
• References

Open Access

Nonsteady frictional heating on a sliding contact 03030

Vladimir B. Zelentsov and Boris I. Mitrin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603030

• Abstract
• PDF (79.20 KB)
• References

Open Access

Dynamics of thermoelastic frictional wear of a coating with piezoelectric interlayer 03031

Polina A. Lapina, Boris I. Mitrin, Tatyana A. Kuznetsova and Vasilina A. Lapitskaya

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822603031

• Abstract
• PDF (99.46 KB)
• References

Open Access

Modeling of critical systems implementing negative events using dual Petri nets 04001

Marina A. Ganzhur, Aleksei P. Ganzhur and Olga V. Smirnova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604001

• Abstract
• PDF (673.6 KB)
• References

Open Access

The efficiency is a single criterion for choosing the type of interaxle drive 04002

Andrey V. Efimov, Sergey O. Kireev and Marina V. Korchagina

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604002

• Abstract
• PDF (101.3 KB)
• References

Open Access

Using the SimInTech dynamic modeling environment to build and check the operation of automation systems 04003

Albert A. Abalov, Sergey V. Nosachev, Viktor P. Zharov and Vsevolod A. Minko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604003

• Abstract
• PDF (1.900 MB)
• References

Open Access

Measuring of plasma’s velocity in electrodynamic railgun using high-frequency method 04004

Vladimir V. Kirievskiy and Evgeny V. Kirievskiy

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604004

• Abstract
• PDF (342.7 KB)
• References

Open Access

On the design of electromagnetic actuators with increased vibration resistance and low vibration activity for the mechatronic devices of autonomous transport systems 04005

Irina A. Bolshenko, Alexandr V. Pavlenko, Konstantin R. Gil’miyarov and Andrey A. Gummel

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604005

• Abstract
• PDF (262.3 KB)
• References

Open Access

Optimization of actuating elements of transport control systems with magnetic levitation based on the solution of inverse problems 04006

Anna Balaban, Yuri Bakhvalov and Valery Grechikhin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604006

• Abstract
• PDF (105.4 KB)
• References

Open Access

Waveguide analysis for ultrasonic medical instruments (comparison of different methods) 04007

Yuri V. Grigoryev and Pyae Phyo Aung

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604007

• Abstract
• PDF (1.324 MB)
• References

Open Access

Probabilistic-deterministic approach of controlling the functionality of a technical system in normal and emergency operation modes 04008

Vladimir M. Zababurin, Marina A. Egorova and Yuliya A. Polyakova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604008

• Abstract
• PDF (94.23 KB)
• References

Open Access

Analysis of methodological approaches and de-velopment of principles for describing properties characterizing the dynamics of the emission and spreading of toxic components of plants of the fuel and energy complex 04009

Vadim Bespalov, Oxana Gurova, Marina Volodina and Lydmila Alekseenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604009

• Abstract
• PDF (88.16 KB)
• References

Open Access

Finite element modeling of bearing elements technological machines and equipment 04010

Sergey I. Yevtushenko, Sergey A. Alekseev, Igor A. Petrov and Vladimir E. Fedorchuk

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604010

• Abstract
• PDF (2.412 MB)
• References

Open Access

Features of control of characteristics of radio engineering devices in the multi-wave mode of operation 04011

Vladimir N. Pichugin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604011

• Abstract
• PDF (289.9 KB)
• References

Open Access

The design of electric drives with electronic protection devices 04012

Boris D. Khastsaev, Larisa M. Dedegkaeva and Maksim P. Maslakov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604012

• Abstract
• PDF (122.4 KB)
• References

Open Access

Application of impedance method for research the dynamics of asynchronous motors 04013

Boris D. Khastsaev and Dmitry V. Merkushev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604013

• Abstract
• PDF (568.7 KB)
• References

Open Access

Feed-forward control of a building’s heating system 04014

Valery V. Fomin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604014

• Abstract
• PDF (119.6 KB)
• References

Open Access

Research of a hydrodynamic purifying device of exhaust and effluent gases from toxic components under dynamic conditions of their emissions into the atmosphere 04015

Vadim I. Bespalov, Oksana S. Gurova, Lydmila N. Alekseenko and Anna P. Prokhorova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604015

• Abstract
• PDF (164.2 KB)
• References

Open Access

Optimization of control program for CNC machines with regarding dynamic stability of cutting process and optimum modes of treatment in conditions of digital production 04016

Yuri G. Kabaldin, Dmitrii A. Shatagin and Pavel V. Kolchin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604016

• Abstract
• PDF (1.251 MB)
• References

Open Access

Research of thickness by using subminiature eddy-current transducers 04017

Sergey F. Dmitriev, Vladimir N. Malikov and Anatoly M. Sagalakov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604017

• Abstract
• PDF (175.3 KB)
• References

Open Access

System analysis of power consumption by nonferrous metallurgy enterprises on the basis of rank modeling of individual technocenosis castes 04018

Roman V. Klyuev, Igor I. Bosikov, Oksana A. Gavrina and Vladimir Ch. Revazov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604018

• Abstract
• PDF (115.0 KB)
• References

Open Access

Dynamics of transformation of ultrasonic vibrations in twisted waveguides 04019

Sergey B. Kudryshev, Valentin S. Minakov, Alexey A. Zakaluyzhnyy and Vladimir A. Peglivanyan

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604019

• Abstract
• PDF (355.7 KB)
• References

Open Access

Study of the object of the natural-technical system and determination of the static characteristics of ventilation 04020

Igor I. Bosikov, Roman V. Klyuev, Boris V. Dzeranov and Marat V. Tekiev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604020

• Abstract
• PDF (816.7 KB)
• References

Open Access

Optimization of electronic document management systems by means of encoding and visualization of stored data in the integrated development environment 04021

Mikhail V. Poskonin, Andrey O. Kalinin, Igor V. Kovalev and Mikhail V. Saramud

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604021

• Abstract
• PDF (728.7 KB)
• References

Open Access

Review of methods for solving inverse problems in identifying permanent magnets of executive elements in dynamic devices 04022

Anna L. Balaban, Yuri A. Bakhvalov and Peter A. Denisov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604022

• Abstract
• PDF (85.97 KB)
• References

Open Access

The problem of choice of optimal technological decisions on harvester control 04023

Valery P. Dimitrov, Lyudmila V. Borisova, Inna N. Nurutdinova, Viktor I. Pakhomov and V.P. Maksimov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604023

• Abstract
• PDF (705.4 KB)
• References

Open Access

The method of dynamic operating modes investigation in electrohydraulic drive systems with improved accuracy of positioning executive elements 04024

Valeriy V. Grechikhin, Galina A. Galka, Anatoliy I. Ozerskiy and Mikhail E. Shoshiashvili

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604024

• Abstract
• PDF (93.75 KB)
• References

Open Access

Modeling of production and destruction processes in coastal systems on a supercomputer 04025

Alla V. Nikitina, Ludmila Kravchenko, Ilya Semenov, Yuliya Belova and Alena Semenyakina

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604025

• Abstract
• PDF (3.090 MB)
• References

Open Access

The dynamics of impurity distribution in marine systems 04026

Valentina V. Sidoryakina and Sofya V. Protsenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604026

• Abstract
• PDF (1.155 MB)
• References

Open Access

Correctness investigation for the suspension transport problem in coastal systems 04027

Alexander I. Sukhinov, Valentina V. Sidoryakina and Sofya V. Protsenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604027

• Abstract
• PDF (340.3 KB)
• References

Open Access

Development of a subsystem for automatic protection of submersible pumps based on mathematical modeling 04028

Alexander V. Pilipenko, Andrei A. Tashev and Nail K. Sharifov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604028

• Abstract
• PDF (793.0 KB)
• References

Open Access

The distribution of pollutants in the ground layer of the atmosphere in the presence of forest plantations 04029

Alexander E. Chistyakov, Alla V. Nikitina and Elena A. Protsenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604029

• Abstract
• PDF (1.754 MB)
• References

Open Access

The difference scheme for the two-dimensional convection-diffusion problem for large peclet numbers 04030

Alexander I. Sukhinov, Alexander E. Chistyakov and Yulia V. Belova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604030

• Abstract
• PDF (842.2 KB)
• References

Open Access

Synthesis of intelligent fuzzy control in the space of bounded piecewise-continuous functions based on the combined maximum principle 04031

Andrey A. Kostoglotov, Sergey V. Lazarnko and Igor A. Nikitin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604031

• Abstract
• PDF (420.8 KB)
• References

Open Access

Direct incentive-compatible mechanism for innovator-investor bargain in an innovation investment system 04032

Alim Gurtuev

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604032

• Abstract
• PDF (105.5 KB)
• References

Open Access

Gear grinding system adapting to higher CNC grinder throughput 04033

Vasily Larshin and Natalya Lishchenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604033

• Abstract
• PDF (94.54 KB)
• References

Open Access

Agricultural machine parts quality control by dynamic non-destructive methods 04034

Alexey N. Beskopylny, Viktor B. Rykov, Elena M. Zubrilina and Andrey D. Chistyakov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604034

• Abstract
• PDF (1.147 MB)
• References

Open Access

Analysis of heterogeneous information and diagnostics of complex technical systems based on methods of diakoptics and correlation analysis 04035

Nuri D. Narakidze, Roman G. Oganyan and Vasily A. Mokhov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604035

• Abstract
• PDF (300.9 KB)
• References

Open Access

Study of methods for dimension reduction of complex dynamic linear systems models 04036

Yuriy M. Manatskov, Torsten Bertram, Danil V. Shaykhutdinov and Nikolay I. Gorbatenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604036

• Abstract
• PDF (1.183 MB)
• References

Open Access

Mathematical modelling and analysis of thermometric diagnostics of electrical products 04037

Danil V. Shaykhutdinov and Konstantin M. Shirokov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604037

• Abstract
• PDF (712.8 KB)
• References

Open Access

Ways of intensification of the process of moistening the grain before grinding 04038

Lyudmila V. Larina, Dmitry V. Rusljakov, Tatiana I. Tupolski and Olga B. Tikhonova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604038

• Abstract
• PDF (91.18 KB)
• References

Open Access

Modeling of capillary-sorption process steam condensation in the system of microcapillaries of grain shells 04039

Lyudmila V. Larina, Dmitry V. Rusljakov and Olga B. Tikhonova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604039

• Abstract
• PDF (86.62 KB)
• References

Open Access

The theory of nonlinear systems as an instrument for solving engineering problems 04040

Olga I. Ohrimenko, Igor M. Maltsev, Violetta V. Rokotyanskaya and Maria L. Vilisova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604040

• Abstract
• PDF (90.52 KB)
• References

Open Access

Assessment of car emission masses at the change of kinetic energy of the “engine – transport vehicle” system 04041

Liparit Kh. Badalyan, Vladimir N. Kurdjukov and Alla M. Ovcharenko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604041

• Abstract
• PDF (116.9 KB)
• References

Open Access

The application of the artificial neural network in analysing the spread quality 04042

Marko Petkovic, Marija Blagojevic and Vladimir Mladenovic

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604042

• Abstract
• PDF (479.4 KB)
• References

Open Access

Research the textures synthesis method based on the neural network 04043

Ragim R. Ibadov, Samir R. Ibadov, Nikolay V. Gapon, Olay A. Tokareva and Andrei V. Alepko

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604043

• Abstract
• PDF (1.700 MB)
• References

Open Access

Exposure of pumping intense external electromagnetic fields on radioelectronic engineering substances with domain structure 04044

Larissa Cherckesova and Dmitriy Bezuglov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604044

• Abstract
• PDF (827.3 KB)
• References

Open Access

Images denoising in case impulse noise using spline approximation 04045

Dmitriy A. Bezuglov, Viacheslav V. Voronin and Vladimir A. Krutov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604045

• Abstract
• PDF (849.0 KB)
• References

Open Access

Restoration of the lost volume of bone tissue with use data of the computed tomography 04046

Evgenii Semenishchev, Alexandr Zelensky, Irina Tolstova, Svetlana Tokareva, Vladimir Frants and Alexey Nadykto

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604046

• Abstract
• PDF (1.618 MB)
• References

Open Access

Conditions for fixing violations of traffic rules do not pass pedestrians on unregulated pedestrian crossings in automatic mode 04047

Samir R. Ibadov, Boris Y. Kalmykov and Ragim R. Ibadov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604047

• Abstract
• PDF (1.869 MB)
• References

Open Access

Metal artifact reduction on MRI images 04048

Nikolay V. Gapon, Evgenii A. Semenishchev, Oxana S. Balabaeva, Arina A. Skorikova, Olga A. Tokareva and Alexey M. Nadykto

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604048

• Abstract
• PDF (1.587 MB)
• References

Open Access

Contour detection in an infrared image using the modified snake algorithm 04049

Viacheslav V. Voronin, Oxana S. Balabaeva, Marina M. Pismenskova, Svetlana V. Tokareva and Irina V. Tolstova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604049

• Abstract
• PDF (990.8 KB)
• References

Open Access

Digital economy, the development ways of cryptocurrency 04050

Oxana G. Ananova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822604050

• Abstract
• PDF (66.52 KB)
• References

Open Access

Artificial intelligence and cyber-physical mechanical processing systems in digital industry 05001

Yuri Kabaldin and Dmitrii Shatagin

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605001

• Abstract
• PDF (1.201 MB)
• References

Open Access

The key management method for the system of end-to-end symmetric database encryption 05002

Vasily Galushka, Daniil Marshakov, Andrey Aydinyan, Olga Tsvetkova and Denis Fathi

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605002

• Abstract
• PDF (88.96 KB)
• References

Open Access

A technique for obtaining 3D coordinates of human body parts from RGB-D stream 05003

Alexander V. Fisunov, Victoria B. Gnezdilova and Vladimir I. Marchuk

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605003

• Abstract
• PDF (2.033 MB)
• References

Open Access

Human body measurement system based on RGB-D camera using 05004

Alexander V. Fisunov and Victoria B. Gnezdilova

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605004

• Abstract
• PDF (1.463 MB)
• References

Open Access

Methods of substitution detected anomalous values in the realization of a random process 05005

Vladimir I. Marchuk and Dmitriy Y. Chernyshov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605005

• Abstract
• PDF (651.1 KB)
• References

Open Access

Obtaining physiological parameters of biological objects from video stream methods analysis 05006

Maxim S. Beloyvanov and Issam Samara

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605006

• Abstract
• PDF (999.1 KB)
• References

Open Access

Shooting parameters measuring from videostream during sports competitions 05007

Maxim S. Beloyvanov and Ilya A. Sadrtdinov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605007

• Abstract
• PDF (247.8 KB)
• References

Open Access

RETRACTED: Adaptive algorithm for wireless data transmission (including images) based on SISO system and OFDM technique 05008

Valentin Fedosov, Andrey Legin and Anna Lomakina

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605008

• Abstract

Open Access

Mathematical model of a communication channel in urban environment 05009

Dmitry Chernyshov and Valentin Fedosov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605009

• Abstract
• PDF (91.67 KB)
• References

Open Access

The increase of signal-to-noise ratio in the spatial separation of signals by the curvature of the wavefront 05010

Aleksandr Okorochkov, Bogdan Malyutin and Gleb Khripkov

Published online: 07 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605010

• Abstract
• PDF (1.054 MB)
• References

Open Access

Retraction notice to: “Adaptive algorithm for wireless data transmission (including images) based on SISO system and OFDM technique” 05011

Valentin Fedosov, Andrey Legin and Anna Lomakina

Published online: 21 November 2018

DOI: https://doi.org/10.1051/matecconf/201822605011

• Abstract
• PDF (41.70 KB)