| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 02010 | |
| Number of page(s) | 6 | |
| Section | 2 Non-linear dynamics and applied synergetics in technical systems | |
| DOI | https://doi.org/10.1051/matecconf/201822602010 | |
| Published online | 07 November 2018 | |
The change of the properties of the turning process by introducing vibrations in the cutting zone
Don State Technical University, 344000 Rostov-on-Don Gagarin sq. 1, Russian Federation
* Corresponding author: sinedden@yandex.ru
The results of the research of the vibrations influence are raising in the cutting zone on the output properties of the cutting process are represented. The results of the mathematical modeling of the dynamic cutting system are represented in which the controlling oscillatory displacements are raised. The system is considered as the unity subsystem of the tool and the detail are interacting through the processing. It is shows that the additional vibrations transform in the geometry topology of the forming surface as the result of the complex nonlinear interaction of the oscillations and the forces. The additional oscillations can cause as improvement of accuracy, quality and intensity of the tool wearing as deterioration of output process characteristics depending on the parameters of the vibration (amplitude, frequency and orientation). The results of the research of the oscillations influence on the quality of the surface and the power of the irreversible transformations which characterize the cutting process state are represented.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.