Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
---|---|---|
Article Number | 02014 | |
Number of page(s) | 6 | |
Section | 2 Non-linear dynamics and applied synergetics in technical systems | |
DOI | https://doi.org/10.1051/matecconf/201822602014 | |
Published online | 07 November 2018 |
Adaptive drive of the technological machine with two working movements of the executive body
Don State Technical University, 346500 Shakhty, Russia
* Corresponding author: lem-mikhail@yandex.ru
The article deals with the machines schemes, having an executive body making two movements and establishing a relationship between them. The ratio of the moving velocities, or the ratio of the two displacements of these movements, or the ratio of the applied powers to each of these movements, determines the indices of the working process, and often has an optimal value. A typical example of this type of machine is a drilling machine. The ratio of rotation speed and the feed rate determines both the specific power intensity of the cutting process , the intensity of the wear out and drilling capacity. The structural schemes of the drive of some other technological machines are considered. On the example of a device used for processing curved surfaces in metalworking, a process of automatically adjusting chip thickness with a hydraulic drive having an adaptive structure is described. The efficiency of self-regulation is shown by means of using relatively simple circuit solutions.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.