| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 01008 | |
| Number of page(s) | 6 | |
| Section | 1 Fundamentals of mechanics, dynamics and tribology of machines | |
| DOI | https://doi.org/10.1051/matecconf/201822601008 | |
| Published online | 07 November 2018 | |
Main trends in intensification of rotor-screw processing of parts
1 Don State Technical University, 344000 Rostov-on-Don, Gagarin square 1, Russia
2 I.T. Trubilin Kuban State Agrarian University, 350044 Krasnodar, Kalinina street 13, Russia
* Corresponding author: va.lebidev@yandex.ru
The ways of productivity increase in details finishing-strengthening processing executed in rotor-screw technological systems are presented. It is shown that the use of rotor-screw machines makes it possible to combine the parts machining using a vibrating field with a large amplitude of oscillations and their transportation in a streamlined form of production organization. Two main directions of rotor-helical processing stimulation are identified: on the basis of structural changes in the screw rotor, as the main working element of the rotor-screw machine and by equipping the screw rotor with activation elements of the process. The classification of screw rotors is presented, which allows purposeful search for the most effective designs of screw rotors and the mechanism is revealed of their influence on the process of parts finishing-hardening processing. Dependence is established for determining the longitudinal movement speed of the parts being processed in the screw rotor. The constructive-technological scheme of the rotor-screw machine is proposed, which allows increase of the productivity of the process and simplification of the design of machines for their implementation, by dismembering the complex screw propulsion of the load mass, which takes place in the screw rotors, into relatively simple in kinematic sense motions. The technological possibilities of rotor-screw processing application for finishing-strengthening operations are presented.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.