Open Access
Issue
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
Article Number 02018
Number of page(s) 11
Section 2 Non-linear dynamics and applied synergetics in technical systems
DOI https://doi.org/10.1051/matecconf/201822602018
Published online 07 November 2018
  1. V.A. Kudinov, Dynamics of machine tools (Publishing house “Engineering” Moscow, 1967) (In Russian). [Google Scholar]
  2. V. L. Zakovorotnyy, M. B. Flek, Dinamika protsessa rezaniya. Sinergeticheskiy podkhod (Terra, Rostov-na-Donu, 2006) [Google Scholar]
  3. V.L.Zakovorotny, A.D. Lukyanov, Dong Anh Nguyen, Pham Dinh Tung, Synergetic system controlled synthesis of dynamics of machine tools, taking into account the evolution of relations (Publishing House DSTU, Rostov-on-Don, 2008) (In Russian) [Google Scholar]
  4. S. A. Tobias, Machine Tool Vibrations (Blackie, London, 1965) [Google Scholar]
  5. H.E. Merritt, J. Eng. Ind, 87 (4), 447 (1965) [CrossRef] [Google Scholar]
  6. J. Tlusty, A. Polacek, C. Danek, J. Spacek, Selbsterregte Schwingungen an Werkzeugmaschinen (VEB Verlag Technik, Berlin, 1962) [Google Scholar]
  7. A.I. Kashirin, Issledovaniye vibratsiy pri rezanii metallov (Izdatel’stvo AN SSSR, Moskva, 1944) [Google Scholar]
  8. L.S. Murashkin, S.L. Murashkin, Applied nonlinear mechanics of metal cutting machines (Publishing house “Engineering”, Leningrad, 1977) (In Russian) [Google Scholar]
  9. M.Ye. El’yasberg, Avtokolebaniya Metallorezhushchikh stankov (OKBS, Sankt-Peterburg, 1993) [Google Scholar]
  10. I.G. Zharkov, Vibratsii pri obrabotke lezviynym instrumentom (Mashinostroyeniye. Leningrad Otd-niye, Leningrad, 1986) [Google Scholar]
  11. V.L. Zakovorotnyy, Pham Dinh Tung, Nguyen Suan Tiem, Vestnik DGTU, 11, (8), 1, 1169 (2011) [Google Scholar]
  12. V. Chandrasekharan, S. G. Kapoor, R. E. DeVor, Proc., ASME Sym. On Machining of Advanced Composites, ASME WAM, 33 (1993) [Google Scholar]
  13. M. M. Nigm, M. M. Sadek, S. A. Tobias, Annals of the CIRP, 21, 97 (1972) [Google Scholar]
  14. J. Peters, P. Vanhereck, H. van Brussel, Annals of the CIRP, 20, 129 (1972) [Google Scholar]
  15. H. J. Fu, R. E. DeVor, S. G. Kapoor, ASME J. of Engg. For Ind., 106, 81 (1984) [CrossRef] [Google Scholar]
  16. G. Subramani, G. Suvada, S. G. Kapoor, R. E. DeVor, W. Meingast, Proc., NAMRC, 15, 439 (1987) [Google Scholar]
  17. A.P. Sokolovskiy, Nauchnyye osnovy tekhnologii mashinostroyeniya (Mashgiz, Moscow, 1955) [Google Scholar]
  18. N.V. Vasilenko, O raschote avtokolebaniy pri rezanii metallov (Prikladnaya mekhanika, Kiev, 1967) [Google Scholar]
  19. T.V. Putyata, V.A. Ostaf’yev, V.I. Akinfiyev, L.YU. Akinfiyeva, Raschot prostranstvennykh avtokolebaniy pri rezanii metallov, 1 (Vestnik mashinostroyeniya, Moscow, 1976) [Google Scholar]
  20. M. Sekar, J. Srinivas, K. Kotaiah, S. Yang, The International Journal of Advanced Manufacturing Technology, 43, 862 (2009) [CrossRef] [Google Scholar]
  21. Y. Altintas, M. Weck, CIRP Annals-Manufacturing Technology, 53 (2), 619 (2004) [CrossRef] [Google Scholar]
  22. M.Wan, Y. Altintas, International Journal of Machine Tools and Manufacture, 87, 16 (2014) [CrossRef] [Google Scholar]
  23. Y. Kurata, S.D. Merdol, Y. Altintas, N. Suzuki, E. Shamoto, Journal of advanced mechanical design, Systems, and Manufacturing, 4, 1107 (2010) [CrossRef] [Google Scholar]
  24. Y. Altintas, M. Eynian, H. Onozuka, CIRP Annals—Manufacturing Technology, 57, 371 (2008) [CrossRef] [Google Scholar]
  25. E. Budak, L.T. Tunc, CIRP Annals—Manufacturing Technology, 59, 403 (2010) [CrossRef] [Google Scholar]
  26. I. Grabec, J. Mach. Tools Manufact, 28, 19 (1988) [CrossRef] [Google Scholar]
  27. M. Eynian, Y. Altintas, Journal of Manufacturing Science and Engineering, 132, 1 (2010) [CrossRef] [Google Scholar]
  28. Y. Altintas, G. Stepan, D. Merdol, Z. Dombovari, CIRP-Journal of Manufacturing Science and Technology, 1, 35, (2008) [CrossRef] [Google Scholar]
  29. G. Stepan, Phil. Trans. R. Soc. Lond., A 359 (1781), 739 (2001) [CrossRef] [Google Scholar]
  30. T. Insperger, G. Stepan, Periodica Polytechnica, 44, 47 (2000) [Google Scholar]
  31. M. Wiercigroch, A. D.-H. Cheng,. Chaos, Solitons and Fractals, 8, 715 (1997) [CrossRef] [Google Scholar]
  32. G. Litak, Chaos, Solitons & Fractals, 13, 1531–5 (2002) [CrossRef] [Google Scholar]
  33. F. C. Moon, T. Kalm´ar-Nagy, Phil. Trans. R. Soc. Lond. A 359, 695 (2001) [CrossRef] [Google Scholar]
  34. R. Rusinek, A. Weremczuk, J. Warminski, Mechanics and Mechanical Engineering, 15, 4, 131 (2011) [Google Scholar]
  35. B. Balachnadran, Phil. Trans. R. Soc. Lond. A Mathematical Physical And Engineering Science, 359 (1781), 793, 2001 [CrossRef] [Google Scholar]
  36. L. Vela-Martínez, J. Carlos Jáuregui-Correa, E. Rubio-Cerda, G. Herrera-Ruiz, A. Lozano-Guzmán, International Journal of Machine Tools and Manufacture, 48 (9), 1054 (2008) [CrossRef] [Google Scholar]
  37. YU.F. Kopelev, Parametricheskiye kolebaniya stankov (Metallorezhushchiye stanki: resp. mezhved. nauch.-tekhn. Sb., Kiyev, 1984) [Google Scholar]
  38. T. Insperger, G. Stepan, INT J NUMER METH ENG, 61, 117 (2004) [CrossRef] [MathSciNet] [Google Scholar]
  39. G. Stepan et al., Int. J. Bifurc. Chaos, 15, 9, 2783 (2005) [CrossRef] [Google Scholar]
  40. Z. Yao, D. Mei, Z. Chen, Journal of Sound and Vibration, 330 (13), 2995 (2011) [CrossRef] [Google Scholar]
  41. B. Powałka, M. Pajor, S. Berczyński, Advances in manufacturing science and technology, 33, 3 (2009) [Google Scholar]
  42. A. V. Push, Shpindel’nyye uzly. Kachestvo i nadozhnost’ (Mashinostroyeniye, Moscow, 1992) [Google Scholar]
  43. E.A. Koddington, N. Levinson, Teoriya obyknovennykh differentsial’nykh uravneniy (IL, Moscow, 1958) [Google Scholar]
  44. I.M. Babakov, Teoriya kolebaniy (Drofa, Moscow, 2004) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.