| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 03017 | |
| Number of page(s) | 5 | |
| Section | 3 Issues of creation and mechanics of heterogeneous and composite materials | |
| DOI | https://doi.org/10.1051/matecconf/201822603017 | |
| Published online | 07 November 2018 | |
Hole drilling and milling of magnetic alloys parts by shaped tube electrolytic machining
Don State Technical University, 344000 Rostov-on-Don Gagarin sq. 1, Russia
* Corresponding author: glebovdon@mail.ru
In this research shaped tube electrolytic machining of drilling and milling of magnetic alloys parts and difficult-to-cut metals, steels and alloys is presented. New research made in the field of space, aviation, automobile, medical, computer and electronics, and others has created the need for small and fine holes with high aspect ratio in these materials. The primary investigations of ECM with the tubular tool electrode are presented. Compared with mechanical machining, shaped tube electrolytic machining (STEM) exhibits an advantage in producing micro-holes with a high aspect ratio and in producing the curved holes. In order to realize the process of electrochemical machining, experimental assembly with the shaped tube tool electrode has been designed and manufactured. Completed researches indicate that this tool electrode has a high potential to machine difficult-to-cut and brittle metals economically and efficiently.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.