| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 04038 | |
| Number of page(s) | 6 | |
| Section | 4 Fundamental methods of system analysis, modeling and optimization of dynamic systems | |
| DOI | https://doi.org/10.1051/matecconf/201822604038 | |
| Published online | 07 November 2018 | |
Ways of intensification of the process of moistening the grain before grinding
Don State Technical University, 344002 Gagarin Square, 1, Rostov-on-Don, Russian Federation
* Corresponding author: ruslyakof@yandex.ru
The aim of this study is substantiation of ways of reducing the time required to process pre-wetting the grain before peeling, flattening, grinding [1]. A method of moistening the grain before grinding with preevacuation of its interior microvoids through the porous shell provides moisture transfer in the liquid phase. This moisture transfer requires the subsequent application of excess pressure to the penetration of moisture to the core of the grain and subsequent long-term otvalivayas grain. To significantly reduce the time of wetting is proposed to use a moisture transfer with effusion in the form of steam produced at low pressure (vacuum), then the guaranteed condensation in micropolitan porous shell of the grain. Study of intensity of moisture transport in accordance with the changes in concentrations of vapour along the length of the capillary in a vacuum proved the possibility of intensifying the process of moistening the grain before grinding.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.