| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 01018 | |
| Number of page(s) | 7 | |
| Section | 1 Fundamentals of mechanics, dynamics and tribology of machines | |
| DOI | https://doi.org/10.1051/matecconf/201822601018 | |
| Published online | 07 November 2018 | |
Research of micro and nano profile surface morphology of vibrational mechanical and chemical zinc coating
1 Don State Technical University, 344000 Rostov-on-Don, Russian Federation
2 Sedov Water Transport Institute, 344006 Rostov-on-Don, Russian Federation
3 Orel State University named after I.S. Turgenev, 302026 Orel, Russian Federation
* Corresponding author: vivanov_dstu@mail.ru
There are some results of zinc coating research acquired on the metals’ surface as a result of mechanical and chemical synthesis, realized in conditions of vibro wave technological systems. The peculiarities of the surface morphology at the micro / nano level of the zinc coating are shown which are formed under the influence of low-frequency oscillations. The growth interconnection of the micro / nano profile of the applied zinc coating is shown. The determination of changes occurring on the coating layer surface at the micro / nano level. The absence of reliable data of the surface layer of the coating at the nano level has significantly limited its modification background. All of the mentioned above brings up to the following task, the given article is devoted to its solution: establishment of particlesdimension, the way of their distribution on the metal surface, besidestheir maximal and minimal roughness data cause by the alteration of the processing time.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.