| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 02025 | |
| Number of page(s) | 5 | |
| Section | 2 Non-linear dynamics and applied synergetics in technical systems | |
| DOI | https://doi.org/10.1051/matecconf/201822602025 | |
| Published online | 07 November 2018 | |
Development of a power supply for multi-angle electric impedance tomography complex
1 Department of Information and Measuring Systems and Technologies, Platov South-Russian State Polytechnic University (NPI), 346428 Novocherkassk, Russia
2 Federal state educational institution of higher education “Rostov Institute of Law of the Ministry of Internal Affairs of the Russian Federation”, Volgodonsk branch, 347360 Volgodonsk, Russia
* Corresponding author: graer@yandex.ru
In the present work, the development of a multi-channel power supply for the hardware part of the hardware-software complex of multiangle electric impedance tomography is considered. The requirements for the developed module are considered based on the selected hardware components, as well as the patient and medical personnel safety requirements, taking into account the standards developed by the International Electrotechnical Commission. Taking into account the formulated requirements, a structural, electrical schematic diagram of the power supply was developed, as well as a printed circuit board and an assembly drawing, and a prototype model was built. The issues of patient and medical personnel safety during the research using the multi-angle electric impedance tomography method with the use of the developed module are considered, including in the case of joint use with electrosurgical devices or defibrillators.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.