| Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
|---|---|---|
| Article Number | 01017 | |
| Number of page(s) | 5 | |
| Section | 1 Fundamentals of mechanics, dynamics and tribology of machines | |
| DOI | https://doi.org/10.1051/matecconf/201822601017 | |
| Published online | 07 November 2018 | |
Projection of the hydraulic pressure drive with application of partial synthesis
Don State Technical University, 344000 Rostov-on-Don, Russian Federation
* Corresponding author: 2130373@mail.ru
In this article “Projection of a Hydraulic Pressure Drive with Application of Partial Synthesis” for the best comprehension and also receiving more complete picture, definitions of the term projection are considered, some fields of activity in which it is applied, namely technological, agricultural mechanical engineering etc are listed. An important part of cars, the drive is, the hydraulic actuator is most often applied – projection of which will be described in this article. First of all the existing technique projection of a hydraulic actuator is considered and its principle is described and shortcomings are designated. For carrying out a better designing process the new technique of projection of a hydraulic pressure drive which includes a stage of partial synthesis is offered. This stage allows explaining the theory of a volume rigidity which in turn allows to simplify calculations because it is possible to count several options of preliminary structures at the same time that will lead to receiving a hydraulic actuator with the best parameters, unlike the previous considered technique.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.