MATEC Web Conf.
Volume 226, 2018XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|Number of page(s)||11|
|Section||2 Non-linear dynamics and applied synergetics in technical systems|
|Published online||07 November 2018|
The effect of parametric excitation on a dynamic system of cutting process
Department “Aerospace technologó and equipment”, Le Quy Don Technical University, Hanoi, Vietnam
* Corresponding author: email@example.com
The problem of ensuring stability of movements of the tool about workpiece taking into account parametric self-excitation is considered. The factors causing periodic changes of parameters in dynamic system when cutting are analyzed. They are connected with spatial anisotropy of properties of elasticity in a subsystem of the processed workpiece with allowance variations on workpiece rotation perimeter, with kinematic perturbation from mechanical part of drives of executive elements of the machine, with periodic processes in a cutting zone. The generalized dynamic model of system with periodically changing parameters is given. Influence of periodically changing parameters on stability of trajectories is studied. The features of loss of stability specific to dynamic systems of cutting are disclosed. In particular, it is shown that due to parametrical effects with increasing cutting speed at increase of rotational frequency of spindle there is always a critical frequency at which the system loses stability.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.