Issue |
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|
|
---|---|---|
Article Number | 04015 | |
Number of page(s) | 6 | |
Section | 4 Fundamental methods of system analysis, modeling and optimization of dynamic systems | |
DOI | https://doi.org/10.1051/matecconf/201822604015 | |
Published online | 07 November 2018 |
Research of a hydrodynamic purifying device of exhaust and effluent gases from toxic components under dynamic conditions of their emissions into the atmosphere
Don State Technical University, 344000 Rostov-on-Don, Russia
* Corresponding author: okgurova@yandex.ru
The article describes the air purifying device of the “OTPO-9” type, which implements the technology of hydrodynamic purification with a foam method where foam was produced by bubbling. The article considers it as the most environmentally efficient and energy-saving device, based on the results of implementation of the methodology of technology selection for purifying exhaust and effluent gases from toxic components of industrial, public and domestic power units up to 1000 kW developed by the authors. The full-scale laboratory studies of the semi-industrial model of the developed device were carried out by the authors. These studies allowed us to define the nitrogen oxide and sulfur removal efficiency depending on the electric voltage, the shape of the device’s side wall in layout, the submersion of inlet and outlet pipe side holes, the ratio of the anode total area to the cathode one. Moreover, the authors have revealed the device scope of application and its advantages. The article states that the proposed device provides environmental safety of the implementation process in comparison with the use of chemical alkaline solutions, which are dangerous for human health and environment.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.