EDP Sciences logo
Web of Conferences logo
Search
Menu
All issues Volume 226 (2018) MATEC Web Conf., 226 (2018) 02017 References
Open Access
Issue
MATEC Web Conf.
Volume 226, 2018
XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
Article Number 02017
Number of page(s) 14
Section 2 Non-linear dynamics and applied synergetics in technical systems
DOI https://doi.org/10.1051/matecconf/201822602017
Published online 07 November 2018
  1. S. A. Tobias, Machine Tool Vibrations, (Blackie, London, 1965) [Google Scholar]
  2. H.E. Merritt, Trans. Am. Soc. Mech. Engns, 87, 447 (1965) [Google Scholar]
  3. I. Koenigsberger, J. Tlusty, Structure of Machine Tools (Pergamon Press, Oxford, 1971) [Google Scholar]
  4. J.Tlusty, A. Polacek, C. Danek, J. Spacek. Selbsterregte Schwingungen an Werkzeugmaschinen (VEB Verlag Technik, Berlin, 1962) [Google Scholar]
  5. V.A. Kudinov, Dynamics of machine tools (In Russian) (Publishing house “Engineering”, Moscow, 1967) [Google Scholar]
  6. S. Kato and S. Marui, Trans. ASME J. Engns Ind., 96, 179 (1974) [CrossRef] [Google Scholar]
  7. S. Lin and, C. I. Weng, Int. J. Mach. Tools Manufact., 30, 53 (1990) [CrossRef] [Google Scholar]
  8. I. Grabec, J. Mach. Tools Manufact, 28, 19 (1988) [CrossRef] [Google Scholar]
  9. Y. Altintas, and M. Weck, CIRP Annals-Manufacturing Technology, 53 (2), 619 (2004) [CrossRef] [Google Scholar]
  10. M. Wan, Y. Altintas,. International Journal of Machine Tools and Manufacture, 87, 16 (2014) [CrossRef] [Google Scholar]
  11. Y. Kurata, S.D. Merdol, Y. Altintas, N. Suzuki, E. Shamoto, Journal of advanced mechanical design, Systems, and Manufacturing, 4 1107, (2010) [CrossRef] [Google Scholar]
  12. M. Eynian, Y. Altintas, Journal of Manufacturing Science and Engineering, 132, 1 (2010) [CrossRef] [Google Scholar]
  13. Y. Altintas, G. Stepan, D. Merdol, Z. Dombovari, CIRP-Journal of Manufacturing Science and Technology, 1, 35,. (2008) [Google Scholar]
  14. G. Stepan, Philosophical Transactions of the Royal Society of London, A359, 739 (2001) [Google Scholar]
  15. T. Insperger, G. Stepan, Periodica Polytechnica, 44, 47 (2000) [Google Scholar]
  16. T. Insperger, G. Stepan, International Journal for Numerical Methods in Engineering 61, 117 (2004) [CrossRef] [MathSciNet] [Google Scholar]
  17. G. Stepan et al. Delay, International Journal of Bifurcation and Chaos, 15, 9, 2783 (2005) [CrossRef] [Google Scholar]
  18. Z. Yao, D. Mei, Z. Chen, Journal of Sound and Vibration, 330 (13), 2995 (2011) [CrossRef] [Google Scholar]
  19. Z V. L.akovorotny, D.T. Pham, T.H. Pham, Bulletin DSTU, 5-6 (74-75), 97 (2013) (In Russian) [Google Scholar]
  20. S.M. Afazov, S.M. Ratchev, J. Segal, A.A. Popov, International Journal of Machine Tools & Manufacture, 56, 28 (2012) [CrossRef] [Google Scholar]
  21. M. Wiercigroch, A. D.-H. Cheng, Chaos, Solitons and Fractals, 8, 715 (1997) [CrossRef] [Google Scholar]
  22. G. Litak, Chaos, Solitons & Fractals, 13, 1531–5 (2002) [Google Scholar]
  23. F. C. Moon and T. Kalm´ar-Nagy, Phil. Trans. R. Soc. Lond. A 359, 695 (2001) [CrossRef] [Google Scholar]
  24. R R.usinek, A. Weremczuk, J. Warminski, Mechanics and Mechanical Engineering. 15, 4, 131 (2011) [Google Scholar]
  25. B. Balachnadran, Phil Trans The Royal Society of London A Mathematical Physical And Engineering Science, 359 (1781), 793 (2001) [Google Scholar]
  26. M.S. Fofana, Chaos Solitons and Fractals, 17, 731-47 (2003) [CrossRef] [Google Scholar]
  27. A. Otto, S. Rauh, M.Kolouch, G. Radons, INT J MACH TOOL MANU, 82-83, 50-58 (2014) [CrossRef] [Google Scholar]
  28. L. Vela-Martínez, J.Carlos Jáuregui-Correa, E. Rubio-Cerda, G. Herrera-Ruiz, A. Lozano-Guzmán, INT J MACH TOOL MANU, 48, 9, 1054 (2008) [CrossRef] [Google Scholar]
  29. G. Urbikain, A. Fernández, L.N. López de Lacalle, M.E. Gutiérrez, INT J MACH TOOL MANU, 67, 35 (2013) [CrossRef] [Google Scholar]
  30. J.G. Kabaldin. Self-organization and nonlinear dynamics in the processes of friction and wearout of the tool during cutting (Publishing center of Komsomolsk on Amur state technical University, 2003) (In Russian) [Google Scholar]
  31. L.S. Murashkin, S.L. Murashkin. Applied nonlinear mechanics of metal cutting machines (Publishing house “Engineering”, Leningrad, 1977) (In Russian) [Google Scholar]
  32. V.L. Zakovorotny, A.D. Lukyanov, Dong Anh Nguyen, Pham Dinh Tung, Synergetic system controlled synthesis of dynamics of machine tools, taking into account the evolution of relations. (Publishing House DSTU, Rostov-on-Don, 2008) (In Russian) [Google Scholar]
  33. G. Stepan, Z. Dombovari, J. Munoa, CIRP Annals - Manufacturing Technology, 60 (1), 113 (2011) [CrossRef] [Google Scholar]
  34. Y. Altintas, M. Eynian, H. Onozuka, CIRP Annals—Manufacturing Technology, 57, 371 (2008) [CrossRef] [Google Scholar]
  35. E. Budak, L.T. Tunc, CIRP Annals—Manufacturing Technology, 59, 403 (2010) [CrossRef] [Google Scholar]
  36. B. Powałka, M. Pajor, S. Berczyński, Advances in manufacturing science and technology, 33, 3 (2009) [Google Scholar]
  37. E.N. Berezkin, Lectures on theoretical mechanics. (MGU, Moscow, 1968) (In Russian) [Google Scholar]
  38. N.N. Buchholz, The main course of theoretical mechanics. H 11. (Science, Moscow, 1972) (In Russian) [Google Scholar]
  39. R. Horn, Ch. Johnson, Matrix analysis (Mir, Moscow, 1989) (In Russian) [Google Scholar]
  40. F.R. Gantmakher, Lectures by analytical mechanics (Science, Moscow, 1966) (In Russian) [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.