MATEC Web Conf.
Volume 226, 2018XIV International Scientific-Technical Conference “Dynamic of Technical Systems” (DTS-2018)
|Number of page(s)||5|
|Section||1 Fundamentals of mechanics, dynamics and tribology of machines|
|Published online||07 November 2018|
Substantiation of the parameters of vibration systems in the cab of the gantry crane at the workplace of crane operators
1 Don State Technical University, 344000 Rostov-on-Don, Russia
2 Rostov State Transport University, 344038 Rostov-on-Don, Russia
3 State Scientific Establishment “Agriculture research center “Donskoy”, North Caucasus Institute of Mechanization and Electrification of Agriculture, 347740 Zernograd, Russia
* Corresponding author: email@example.com
Reduction of vibration in the cabin can be achieved by increasing the area of vibration absorption by placing on the ceiling and floor vibro-absorbing facings. The process of absorption of vibration occurs due to the transition of the energy of oscillating particles to heat due to frictional losses in the pores of the material; therefore, for effective vibration absorption, the material must have a porous structure, the pores must be open from the side of the vibration and join together (unclosed pores) so as not to prevent the penetration of the vibration wave into the thickness of the material. As a vibration-absorbing cladding, we use a construction in the form of a layer of a homogeneous porous material of a certain thickness, reinforced directly on the surface of the fence.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.