EDPS Account

Volume 178 (2018)

Free Access to the whole issue

MATEC Web of Conferences

Volume 178 (2018)

22^nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018

Chisinau, Republic of Moldova, May 31 - June 2, 2018
L. Slătineanu, V. Merticaru, A.M. Mihalache, O. Dodun, M.I. Ripanu, G. Nagit, M. Coteata, M. Boca, R. Ibanescu and C.E. Panait (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 24 July 2018

PDF (55.5 KB)

Open Access

About the conference

Published online: 24 July 2018

PDF (82.7 KB)

Open Access

Preface 00001

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817800001

Open Access

Opening address 00002

Laurentiu Slatineanu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817800002

Advanced Machining and Surface Engineering

Open Access

Detached chip smoothing during involute gear slotting in relation to generated tooth features 01001

Mihai Bordeanu, Gabriel Frumuşanu and Nicolae Oancea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801001

Open Access

Research on the influence of a new tap drill geometry on C45, 42CrMo4 and X5CrNi8 steel processing 01002

Adrian Sorin Faur, Marcel Sabin Popa, Bogdan Cornel Luca, Ioan-Doru Voina and Dan Bizubac

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801002

Open Access

Processing of convex complex surfaces with toroidal milling versus ball nose end mill 01003

Andrei Oşan, Mihai Bănică and Vasile Năsui

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801003

Open Access

Study of an algorithm regarding production scheduling for injection mold manufacturing 01004

Bogdan Pralea and Gheorghe Nagîţ

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801004

Open Access

The optimal dimensional design of machining technologies 01005

Alexei Toca, Aurel Stroncea, Ion Stîngaci and Ion Ruşica

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801005

Open Access

Theoretical considerations concerning the profile error of the thread flank 01006

Laurenţiu Slătineanu, Oana Dodun, Irina Beşliu Băncescu, Ionel Coman, Adrian Ghionea and Traian Mihordea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801006

Open Access

Proposing a method for estimating the real micro profile of a milling tool 01007

Mihai Boca, Mihaita Horodinca and Marian-Octavian Andronic

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801007

Open Access

Using artificial neural network models for the prediction of thrust force and torque in drilling operation of Al7075 01008

Panagiotis Kyratsis, Nikolaos Efkolidis, Daniel Ghiculescu and Konstantinos Kakoulis

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801008

Open Access

Influence of cutting parameters on surface quality when machining a CoCrWNi alloy 01009

Manuela-Roxana Dijmărescu, Ioan-Cristian Tarbă, Maria-Cristina Dijmărescu and Vlad Gheorghiţă

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801009

Open Access

Experimental research on the elastic deformation mode of 1C45 (1.0503) SR EN 10083- 1.2 rolled steel fastened between the centers of an universal lathe 01010

Lucian Tăbăcaru, Gavril Muscă and Alexandra Dzedzid

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801010

Open Access

Influence of the cutting edge microgeometry in drilling operation of 42CrMo4 and X5CrNi18-10 01011

Vlad-Bogdan Tomoiagă, Marcel Sabin Popa, Stefan Sattel, Glad Conţiu, Ovidiu Virgil Vereş and Marius Bozga

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801011

Open Access

Features of synthesis method of functionoriented technologies for the ship units details 01012

Аndrey Kоstenko and Аleksandr Mikhaylov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801012

Open Access

Researches regarding introducing temperature as a factor in cutting tool wear monitoring 01013

Marinela Inţă and Achim Muntean

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801013

Open Access

Reamers cutting edge preparation for improvement the GGG 40 machining 01014

Ioan-Doru Voina, Stefan Sattel, Glad Contiu, Adrian Faur and Bogdan Luca

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801014

Open Access

The influence of brushing on the surface quality of aluminium 01015

Uwe Teicher, Richard Schulze, Alexander Brosius and Andreas Nestler

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801015

Open Access

Analysis of chip formation and cutting forces in end milling AISI D2 tool steel with different cutting tool geometries 01016

Irina Beşliu, Dumitru Amarandei and Delia Cerlincă

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801016

Open Access

Optimizing ANN performance using DOE: application on turning of a titanium alloy 01017

John Kechagias, Aristidis Tsiolikas, Panagiotis Asteris and Nikolaos Vaxevanidis

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817801017

Assembling Technologies, Forming Technologies, Additive Manufacturing

Open Access

Simple equipment for studying the injection molding process 02001

Adelina Hriţuc

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802001

Open Access

The neural networks used in FDM printing study 02002

Adriana Munteanu and Dragos-Florin Chitariu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802002

Open Access

Analysis of relation between edging ratio and deformation work done in pre-forming of workpiece by bulk buckling 02003

Volodymyr Kukhar, Elena Balalayeva, Andrii Prysiazhnyi, Oleg Vasylevskyi and Iryna Marchenko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802003

Open Access

Design and manufacturing of a fixing device for incremental sheet forming process 02004

Daniel Nasulea and Gheorghe Oancea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802004

Open Access

A study for determining the most significant parameters of the ball-burnishing process over some roughness parameters of planar surfaces carried out on CNC milling machine 02005

Stoyan D. Slavov and Diyan M. Dimitrov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802005

Open Access

Geometrical analysis, for rapid prototyping, of the compressor’s helical conic rotor model 02006

Nicuşor Baroiu, Viorel Păunoiu, Virgil Gabriel Teodor, Florin Susac and Nicolae Oancea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802006

Open Access

Evaluation of the supporting plate edge radius and position effects on springback in incremental forming, part A 02007

Khalil Ibrahim Abass

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802007

Open Access

Research on 3D printed fixture components 02008

Dragoş-Florin Chitariu and Adriana Munteanu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802008

Open Access

Designing of an innovative extrusion system for metallic parts made by desktop 3D printing method 02009

Razvan Pacurar, Ancuta Pacurar and Serban Pop

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802009

Open Access

Finite element simulation and experimental investigation of cold forward extrusion process 02010

Dorin Luca

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802010

Open Access

The analysis of the parameters for deep drawing of cylindrical parts 02011

Dan Chiorescu, Esmeralda Chiorescu and Sergiu Olaru

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802011

Open Access

Supporting plate edge radius and internal hole diameter relation effect on the springback in incremental forming, part B 02012

Khalil Ibrahim Abass

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817802012

Non-Conventional Technologies in Manufacture and Industry, Welding Technologies

Open Access

Device for the study of sharp peaks behavior under the action of single electrical discharges 03001

Mihaela Eţcu, Laurenţiu Slătineanu and Sebastian-Nicolae Croitoriu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803001

Open Access

Comparative study on microhardness between friction stir welding and tungsten inert gas assisted friction stir welding of pure copper 03002

Marius Adrian Constantin, Ana Boşneag, Eduard Niţu and Monica Iordache

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803002

Open Access

Analysis of the influence of position of welding materials on the FSW seams properties for three dissimilar aluminium alloy 03003

Ana Bosneag, Marius Adrian Constantin, Eduard Niţu and Monica Iordache

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803003

Open Access

Experimental study on reverse engineering in case of composite materials cut by water jet cutting 03004

Ioan Alexandru Popan, Nicolae Balc, Alina Popan and Alexandru Carean

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803004

Open Access

Direct metallization by a plasma coating process on thermal conductive polyamide 03005

Alexandru Sover and Jonas Amend

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803005

Open Access

Some aspects of modelling and simulation of spot welding 03006

Viorel Cohal

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803006

Open Access

The effects of quality finishing surface on sealing and gluing 03007

Alexandra Petrisor, Gheorghe Nagit and Lucian Tabacaru

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803007

Open Access

Characterisation of porous coatings formed on titanium under AC plasma electrolytic oxidation 03008

Krzysztof Rokosz, Tadeusz Hryniewicz, Sofia Gaiaschi, Patrick Chapon, Steinar Raaen, Łukasz Dudek, Kornel Pietrzak, Winfried Malorny and Radion Ciuperca

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803008

Open Access

Characterisation of porous coatings formed on titanium under DC plasma electrolytic oxidation 03009

Krzysztof Rokosz, Tadeusz Hryniewicz, Sofia Gaiaschi, Patrick Chapon, Steinar Raaen, Łukasz Dudek, Kornel Pietrzak, Winfried Malorny and Radion Ciuperca

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803009

Open Access

Experiments of ultrasonically aided micro-EDM on Ti with nanostructured superficial TiO₂ layers 03010

Niculae Marinescu, Daniel Ghiculescu, Stergios Ganatsios and George Seritan

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803010

Open Access

Study of the influence of the technological parameters on the weld quality using artificial neural networks 03011

Daniel-Constantin Anghel and Alexandru Ene

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803011

Open Access

AHP method to determine the optimal technological variant for maxillofacial implant fabrication 03012

Luciana Laura Dincă, Alexandra Banu, Aurelian Vişan and Nicolae Ionescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803012

Open Access

3D laser scanning and digital restoration of an archaeological find 03013

Stergios Fragkos, Emanuel Tzimtzimis, Dimitrios Tzetzis, Oana Dodun and Panagiotis Kyratsis

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803013

Open Access

Considerations regarding the use of cryogenic cooling in metal cutting as an alternative to conventional cooling – brief review 03014

Ana Maria Bocăneţ and Cristian Croitoru

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803014

Open Access

The study of the screen printing quality depending on the surface to be printed 03015

Viorica Cazac, Jana Cîrja, Emilia Balan and Cristina Mohora

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803015

Open Access

Molecular dynamics simulation of multi-pass nano-grinding process 03016

Nikolaos E. Karkalos and Angelos P. Markopoulos

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817803016

Advanced Materials

Open Access

Effect of novolac nanoparticles additions on specific gravity of NBR/CR blends 04001

Mohammed H. Al-Maamori, Ali I. Al-Mosawi and Shaymaa Abbas Abdulsada

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804001

Open Access

Explanation of tuberculation scales formation in steel and iron pipes using the theory of wave motion of a liquid 04002

Alexey Andrianov and Evgeny Orlov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804002

Open Access

Investigation of the geometric change of plastic articles made by polyamide 04003

Metin Aclan, Rauf Oezden and Saliba Danho

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804003

Open Access

Wave absorption control in the new designed photonic metamaterials with artificial opal 04004

Daniela Ionescu and Gabriela Apreotesei

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804004

Open Access

Enhancing the properties of some inverse opal metamaterials by the stopband control 04005

Daniela Ionescu and Irina Macovei

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804005

Open Access

Dynamic arrays based on magnetically controlled Fe₃O₄ particles 04006

Ivan Shorstkii

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804006

Open Access

About buckling calculus of straight bars on elastic environment by Transfer-Matrix Method (TMM) for dental implants 04007

Mihai Tripa, Geamilia Şolea, Dorina Sorcoi, Iulia Florescu, Adriana Sorcoi, Daniela Păunescu, Nicolae Bâlc and Mihaela Suciu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804007

Open Access

Configuring a system for hydraulic oil contamination management 04008

Petru Dusa, Eugen Purice, Radu Lupascu, Iustina Ripanu and Gabriel Fandarac

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804008

Open Access

Considerations on determining the castability of dental casting alloys 04009

Cristian Deac, Alina Gligor and Lucian Tarnu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804009

Open Access

Finite element analysis of the stress distribution in a representative elementary volume of mineral casting 04010

Mihai Ciupan

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804010

Open Access

Study of structural changes in metallic materials subjected to shock stress 04011

Sorin Cristea and Marius Bibu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804011

Open Access

Optimization of TiO₂ nanotubes synthesis on cylindrical surfaces for bio-implants 04012

Gabriela Strnad, Laszlo Jakab-Farkas, Paul Chetan and Cecilia Petrovan

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804012

Open Access

An environmental friendly model for materials substitution in a fiberglass reinforced polyester composite 04013

Eugen Axinte, Yan Wang, Ahmad Majdi Abdul-Rani, Abdul Azeez Abdu Aliyu, Octavian Andronic, Ciprian Stegaru and Andrei Bofu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817804013

Design and Analysis, CAD/CAM/CAE/CAx Technologies, Flexible Manufacturing, Automation and Robotics in Technological Processes

Open Access

Experimental evaluation of Ellis scale for assessment of product's industrial design 05001

Andrei Dumitrescu and Mihail Purcărea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805001

Open Access

Applying of a design methodology for a new mobility product 05002

Vlad Gheorghiţă and Cătălin Gheorghiţă

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805002

Open Access

Enhancing product structure design for an automation mechanism, by involving axiomatic design theory 05003

Vasile V. Merticaru, Eugen Merticaru, Ioan Butnariu and Marius-Marian Cucos

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805003

Open Access

Waves in electric contact wires subjected to transversal impulses 05004

Răzvan Andrei Oprea, Gabriel Popa and Marius Alin Gheţi

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805004

Open Access

An overview of possibilities for CAM machining 05005

Andrei Marius Mihalache

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805005

Open Access

A systematic procedure to obtain the block diagram model from the bond graph model 05006

Radu Ibănescu and Mihaela Ibănescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805006

Open Access

An integrated engineering solution used for enhancing the design of a technological device for automated assembly 05007

Ionut Madalin Pista, Vasile Merticaru and Marius Ionut Ripanu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805007

Open Access

Design optimization of the satellite in precessional transmission 05008

Stanislav Lealin

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805008

Open Access

The necessity of using high quality orthoses in rehabilitation medicine 05009

Elena Amaricai

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805009

Open Access

Studies on robotic testing equipment used in mechatronic devices manufacturing processes to improve the root cause analysis 05010

Ion Cristian Braga, Anisor Nedelcu and Razvan Udroiu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805010

Open Access

Product engineering design enhancing by parameterizing the 3D solid model 05011

Marius Marian Cucos, Ionut Madalin Pista and Marius Ionut Ripanu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805011

Open Access

Study regarding the structural response of standard cylindrical roller bearings using ANSYS and MESYS 05012

Alin Marian Puşcaşu, Octavian Lupescu and Ana Bădănac

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805012

Open Access

Solution to optimize the NC programs for milling machining applications 05013

Adrian But and Vlad Botnari

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805013

Open Access

Numeric analysis of airflow around the body of the Silesian Greenpower vehicle 05014

Andrzej Baier, Łukasz Grabowski, Łukasz Stebel, Mateusz Komander, Przemysław Konopka, Alicja Kołodziej and Paweł Żur

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805014

Open Access

A new role of unruly product design based on “Transformed Objects” design approach 05015

Athanasios Manavis, Nikoleta Kapakiari and Gheorghe Oancea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805015

Open Access

Design and operating rules in the essential requirements – ergonomic aspects 05016

Adam Górny

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805016

Open Access

Multi-criteria analysis of wearable activityfitness trackers and 3D concept models of smart jewellery 05017

Raluca Marinescu (Repanovici)

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805017

Open Access

Design and flow simulation for a centrifugal pump with double suction impeller 05018

Eugen-Vlad Năstase

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805018

Open Access

Contribution to predefinition of the geometric features and their processing sequences in order to create a CAPP model 05019

Iaroslav Francisc Pişec and Florin Sandu Blaga

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817805019

Mechanical and Manufacturing Equipment Devices and Instrumentation

Open Access

Evaluation of the vertical vibrations behaviour of the bogie at failure of the dampers in the primary suspension of the railway vehicle 06001

Mădălina Dumitriu and Marius Alin Gheţi

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806001

Open Access

Actions to increase the reliability of the chain transmissions 06002

Ştefan Ghimişi and Dana Nicula

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806002

Open Access

Influence of resistance to motion of railway vehicles on the longitudinal trains dynamics 06003

Camil Crăciun and Cătălin Cruceanu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806003

Open Access

About the influence of wheel-rail adhesion on the maximum speed of trains 06004

Marius-Adrian Spiroiu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806004

Open Access

Failure modes analysis of railway wheel 06005

Marius-Adrian Spiroiu and Mircea Nicolescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806005

Open Access

Construction of elastic wheels on light rail vehicles 06006

Ioan Sebeşan, Sorin Arsene and Ion Manea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806006

Open Access

Research regarding the action of the aerodynamic forces on a classical passenger train 06007

Sorin Arsene

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806007

Open Access

Dynamics of a beam on elastic foundation - impact of the bilinear characteristic of the foundation upon the propagation of the bending wave 06008

Traian Mazilu and Cristian Ioan Cruceanu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806008

Open Access

Dynamic model elaboration for the planetaryprecessional gear reducer against vibration 06009

Valeriu Dulgheru and Iulian Malcoci

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806009

Open Access

Some aspects of design and application of inertial dampers 06010

Maciej Dutkiewicz, Irena Gołębiowska, Ivan Shatskyi, Vasyl Shopa and Andrii Velychkovych

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806010

Open Access

Theoretical basics and experimental methods of consideration of the concrete mixtures' movement resistance in the concrete-delivery pipelines 06011

Sergey Novikov, Boris Zhadanovsky and Sergey Sinenko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806011

Open Access

Prediction of thermal field dynamics of mould in casting using artificial neural networks 06012

Florin Susac, Valentin Tăbăcaru, Nicuşor Baroiu and Viorel Păunoiu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806012

Open Access

Fatigue life investigation on a MAC engine piston 06013

Costel Humelnicu, Valentin Amortila and Elena Mereuta

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806013

Open Access

Positioning study of driver's hands in certain areas of the steering wheel 06014

Valentin Amortila, Elena Mereuta, Silvia Veresiu, Madalina Rus and Costel Humelnicu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806014

Open Access

Definition of the coefficient of blackness for inhomogeneous surfaces under conducting thermography 06015

Olha Kletska, Anatoliy Falendysh, Oleh Vasylenko and Andrii Onyshchenko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806015

Open Access

The choice of concrete mixers for the concrete preparation 06016

Batraz Kaitukov, Mihail Stepanov and Pavel Kapyrin

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806016

Open Access

Technological machines, construction resources, efficiency and safety 06017

Nadegda Sevryugina and Pavel Kapyrin

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806017

Open Access

Use of the experimental modal analysis for analytical lifetime estimation of a bogie frame 06018

Ion Manea, Ioan Sebesan, Mihai Matache, Gabriel Prenta and Catalin Firicel

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806018

Open Access

Direct measurements using on-board diagnostics: study of the dynamics of a vehicle equipped with a DSG automated transmission 06019

Dan Micu, Iordan Fileru, Marius Toma and Cristian Andreescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806019

Open Access

Necessity and conditionality regarding the electromagnetic track brake - parametric study 06020

Cătălin Cruceanu and Camil Crăciun

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806020

Open Access

Influence of the rail dampers on the frequencydomain response of the rail 06021

Traian Mazilu and Dorina Fologea

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806021

Open Access

Aerodynamic efficiency enhancement for asymmetric profiles 06022

Viorel Bostan, Marin Guţu and Valeriu Odainâi

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806022

Open Access

Reduction of vibrations in mechanical systems using piezoelectric elements 06023

Katarzyna Bialas

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806023

Open Access

Method of axial adjustment for precessional transmissions 06024

Ion Bostan, Sergiu Mazuru and Maxim Casian

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817806024

Innovation, Creativity, Learning and Education in Engineering

Open Access

Success factors for R & D projects 07001

Liliana Luca

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807001

Open Access

Analyses of the method development of decisions in an expert system with the use of information from an artificial neural network 07002

Stanisław Duer, Konrad Zajkowski, Serghei Scaticailov and Paweł Wrzesień

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807002

Open Access

Taking decisions in the diagnostic intelligent systems on the basis information from an artificial neural network 07003

Stanisław Duer, Serghei Scaticailov, Jacek Paś, Radosław Duer and Dariusz Bernatowicz

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807003

Open Access

Development of E-learning systems in technical universities 07004

Gavril Musca, Andrei Marius Mihalache and Lucian Tabacaru

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807004

Open Access

Static analysis of a torsion motor generating flexion - extension motions of the elbow 07005

Tudor Deaconescu and Andrea Deaconescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807005

Open Access

Establishing the torsional rigidity of a rotation module responsible for the flexion-extension motions of the elbow 07006

Tudor Deaconescu and Andrea Deaconescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807006

Open Access

SMEs creativity and smart regional development 07007

Claudiu Pirnau, Daniel Ghiculescu and Niculae Ion Marinescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807007

Open Access

Application of GeoGebra software into teaching mechanical engineering courses 07008

Diyan M. Dimitrov and Stoyan D. Slavov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807008

Open Access

3D printing new direction and collaboration in scientific research. A scientometric study using Web of Science, Clarivate Analytics database 07009

Raluca Marinescu (Repanovici) and Anişor Nedelcu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807009

Open Access

The liquid CO₂ disposal in sea pits near Greece 07010

Lucian Mândrea, Viorel Bădescu and Gheorghe Militaru

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817807010

Industrial And Product Management, Quality and Evaluation

Open Access

Measurement loop, automatic tuning and product quality tracking 08001

Marcela Man Dietrich and Marcel Sabin Popa

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808001

Open Access

Improvement of tools for decision support systems (DSS) in corporate information systems of industrial enterprises 08002

Andrey Plakhin, Igor Semenets, Ekaterina Ogorodnikova and Denis Mironov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808002

Open Access

Improving the quality management of an enterprise in the field of underwater construction 08003

Andrey Plakhin, Igor Semenets, Alexandr Kokovikhin and Ruslan Dolzhenko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808003

Open Access

Standards as a tool for quality management in the pipe market 08004

Ekaterina Ogorodnikova, Ludmila Creciun, Alexandr Kokovikhin and Ruslan Dolzhenko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808004

Open Access

Factors affecting configuration plans in product development 08005

Arik Sadeh, Shlomi Gecht and Cristina Feniser

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808005

Open Access

Some aspects of technology transfer 08006

Alexei Toca, Vadim Iaţchevici, Tatiana Niţulenco and Nicolae Rusu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808006

Open Access

Agile management in the context of Russian industrial sector 08007

Elizaveta A. Gromova

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808007

Open Access

Management possibilities for increasing the electric steel quality 08008

Mihnea Costoiu, Adrian Ioana, Augustin Semenescu, Dragos Marcu and Massimo Polifroni

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808008

Open Access

Management elements for the spatial organization of enterprises from the metallic materials industry 08009

Mihnea Costoiu, Adrian Ioana, Augustin Semenescu, Dragos Marcu and Massimo Polifroni

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808009

Open Access

Considerations on the derailment causes over the years on the Romanian railway network 08010

Mircea Nicolescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808010

Open Access

Experimental accuracy assessment of different measuring sensors on workpieces with varying properties 08011

Rauf Oezden, Metin Aclan and Saliba Danho

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808011

Open Access

A qualitative estimation of the influence of transport factors on the work efficiency 08012

Alexandru Ene and Daniel-Constantin Anghel

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808012

Open Access

Contributions concerning the possibility of implementing the APQP concept in the aerospace industry 08013

Alina Bianca Pop, Mihail Aurel Ţîţu, Constantin Oprean, Costel Ceocea, Andrei Victor Sandu and Ştefan Ţîţu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808013

Open Access

Research on improving water quality using two experimental statistical methods 08014

Mihail Aurel Ţîţu, Andrei Victor Sandu, Costel Ceocea, Alina Bianca Pop, Ştefan Ţîţu and Alexandra Maria Matia

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808014

Open Access

Security risk analysis and management 08015

Nicolae Anton and Anişor Nedelcu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808015

Open Access

Measuring the roundness deviation in the Vblock measurement method 08016

Pavlina Toteva, Dimka Vasileva and Krasimira Koleva

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817808016

Energy (Smart Grids, Energy Efficiency in Buildings, Energy systems and energy management, Energy policies, Environmental technologies and studies, Renewable energy technologies and energy saving materials)

Open Access

The assessment of magnetic water treatment on formation calcium scale on reverse osmosis membranes 09001

Alexey Andrianov and Evgeny Orlov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809001

Open Access

The restriction produced by the air filtration system versus the restriction produced by the air filter 09002

Marius Toma, Cornelia Stan and Iordan Fileru

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809002

Open Access

Energy potential from biomass wastes analysis at the regional level 09003

Tatiana I. Andreenko and Tatiana S. Gabderakhmanova

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809003

Open Access

Data processing as a critical part of GIS based mapping of renewable energy perspectives 09004

Paul E. Kargashin, Anna I. Prasolova, Boguslav A. Novakovsky, Yulia Yu. Rafikova, Roman V. Gorbunov and Tatiana Yu. Gorbunova

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809004

Open Access

Influence of insolation and ambient temperature on operation of digital voltage transformers in Russia 09005

Elena Gotovkina, Vladimir Tyutikov, Nikolay Smirnov, Vladimir Lebedev and Evgeniy Bushuev

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809005

Open Access

Thermal and aerodynamic tests of a digital combined current and voltage transformer 09006

Sergey Litvinov, Vladimir Lebedev, Nikolay Smirnov, Vladimir Tyutikov and Sergey Shuvalov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809006

Open Access

Guidelines on calculation of the concrete thermal treatment modes 09007

Sergey Novikov, Boris Zhadanovsky and Sergey Sinenko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809007

Open Access

The use of CPC theory for energy description of two nonlinear receivers 09008

Konrad Zajkowski, Ivan Rusica and Zuzana Palkova

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809008

Open Access

Improper management of dams constructed with local materials, infiltration risk and wasted electric energy 09009

Victorita Radulescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809009

Open Access

Numerical modeling of the intelligent heating systems for living space 09010

Victorita Radulescu

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809010

Open Access

Estimation of microalgae resource potential for bio-oil production and sustainable rural development in the climatic conditions of Russia (the Republic of Dagestan) 09011

Nadezhda I. Chernova, Sofya V. Kiseleva, Mikhail S. Vlaskin and Yulia Yu. Rafikova

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809011

Open Access

Cold engine cranking by means of modern energy storage devices - physical simulation 09012

Alexey B. Tarasenko, Tatiana S. Gabderakhmanova, Sophia V. Kiseleva and Musi J. Suleymanov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809012

Open Access

Analysis of the evolution of pollution indicators in a crossroads area of Sibiu, Romania 09013

Lucian Tarnu, Alina Gligor and Cristian Deac

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809013

Open Access

Green manufacturing dimensions and global trends of consumption 09014

Vasile Popa and Luminiţa Popa

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809014

Open Access

Effective removal of nutrients from wastewater 09015

Olga Ruzhitskaya, Elena Gogina and Varvara Shmalko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809015

Open Access

Modern technologies of wastewater treatment for low-capacity facilities 09016

Elena Gogina, Olga Ruzhitskaya and Varvara Shmalko

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809016

Open Access

Bioreactor for wastewater treatment 09017

Artem Kulakov and Nikolay Makisha

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809017

Open Access

Peculiarities of membrane bioreactors' maintenance 09018

Nikolay Makisha and Artem Kulakov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809018

Open Access

Static calculations in the context of sewer pipe sliplining by polymer hose 09019

Oleg Primin and Vladimir Orlov

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809019

Open Access

Modern methods for surface wastewater treatment 09020

Oleg Primin and Galina Varyushina

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809020

Open Access

Potential of biological phosphorus removal 09021

Nina Zaletova, Sergey Zaletov and Ivan Bulychev

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809021

Open Access

Concentration of active sludge in the aeration reactors 09022

Nina Zaletova and Nadezhda Morozova

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809022

Open Access

F-Gas regulation-Possible solutions for the retrofit dead end 09023

Filipe Gonçalves and Miguel Cavique

Published online: 24 July 2018

DOI: https://doi.org/10.1051/matecconf/201817809023