Issue |
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|
|
---|---|---|
Article Number | 01010 | |
Number of page(s) | 8 | |
Section | Advanced Machining and Surface Engineering | |
DOI | https://doi.org/10.1051/matecconf/201817801010 | |
Published online | 24 July 2018 |
Experimental research on the elastic deformation mode of 1C45 (1.0503) SR EN 10083- 1.2 rolled steel fastened between the centers of an universal lathe
Gheorghe Asachi Technical University of Iasi, Faculty of Machine Manufacturing and Industrial Management, Iasi, Romania
* Corresponding author: ltabacaru@tcm.tuiasi.ro
Elastic deformations of the technological system occur during the mechanical treatment of a blank, regardless of the manner in which it is fastened. The elastic deformation of the blank is significant especially when machining shaft-like parts. The purpose of our research is to compare the mathematical model of blank deformation to the experimental model when the blank, which is a part belonging to the shaft class, is fastened between centers.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.