MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Section||Assembling Technologies, Forming Technologies, Additive Manufacturing|
|Published online||24 July 2018|
The analysis of the parameters for deep drawing of cylindrical parts
University of Agronomical Sciences and Veterinary Medicine, Department of Pedotechnics, 3, Mihail Sadoveanu Alley, 700490, Iaşi, Romania
2 Gheorghe Asachi Tehnical University, Department of Machine Manufacturing Technology, 59 A, Dimitrie Mangeron Blvd, 700050, Iaşi, Romania
* Corresponding author: email@example.com
Deep drawing is a very important metal forming process. Thin steel sheet is important material for manufacture of numerous products with deep drawing and stamping. Cold working provides also the possibility of making parts of various shapes, from the simplest to those with a high degree of complexity whose execution through other methods is uneconomical, difficult and sometimes even impossible. In this paper it is analyzed both experimentally and with the help of the finite element, the behavior of the blank during the cylindrical cup deep drawing process, using the ANSYS software program and the finite element method. A comparison is realized between the experimental and the analytical results, elaborating a representative set of problems that analyze the variation of the die punch clearance, movement of the punch and with or without lubrication. The results of the research are useful in developing a sensible design of experiments.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.