| Issue |
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|
|
|---|---|---|
| Article Number | 08001 | |
| Number of page(s) | 6 | |
| Section | Industrial And Product Management, Quality and Evaluation | |
| DOI | https://doi.org/10.1051/matecconf/201817808001 | |
| Published online | 24 July 2018 | |
Measurement loop, automatic tuning and product quality tracking
1
Helix GmbH, Hanauer Landstraße 52, 60314 Frankfurt am Main, Germany
2
Faculty of Machine Building, Technical University of Cluj-Napoca, B-dul Muncii nr. 103-105, 400641 Cluj-Napoca, Romania
* Corresponding author: marcela_man@hotmail.com
Starting from the PDCA cycle (Plan - Do - Check - Act), imposed by the ISO 9000 quality standards, a loop is proposed to automatically adjust the work equipment to the statistical distribution of the quality feature of the last N products randomly selected. The loop promptly warns the leadership in case of distortion of the statistical distribution, caused by equipment, raw materials, human operators or the environment. It also constantly informs about the percentage of noncompliant products. The main original element, at the heart of the article's concerns, is the quality tracking loop presented in section 4. The starting point is the quality management scheme, according to ISO9000, while sections 2-3 expose the theoretical basis of the subject, without which it would have not been possible to deepen the role of the modules from the loop proposed in Figure 6.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.