MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Section||Advanced Machining and Surface Engineering|
|Published online||24 July 2018|
Influence of cutting parameters on surface quality when machining a CoCrWNi alloy
University POLITEHNICA of Bucharest, Department of Manufacturing Engineering, Splaiul Independentei, no. 313, 060042, Bucharest, Romania
2 University POLITEHNICA of Bucharest, Department of Materials Technology and Welding, Splaiul Independentei, no. 313, 060042, Bucharest, Romania
* Corresponding author: firstname.lastname@example.org
Due to their excellent biocompatibility and mechanical properties, the use of Co-Cr based alloys in medical applications has increased substantially. An important characteristic of the medical implants is their surface quality, this being a significant constraint when machining this kind of products. The aim of this paper is to present a research conducted in order to determine and expose the influence of turning cutting parameters on the surface roughness of a CoCrWNi alloy.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.