MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Section||Advanced Machining and Surface Engineering|
|Published online||24 July 2018|
- R. Cortes Lillo, Cutting Edge Preparation of Precision Cutting Tools by Applying Micr-abrasive Jet Machning and Brushing, PhD Thesis, (Kassel Univsersity Press, Kassel, 2009) [Google Scholar]
- F. Tikal, R. Bienemann, L. Heckmann, Cutting edge preparation, objectives, methods and measuring methods, reports from industry and research (in German) (Kassel University Press, Kassel, 2009) [Google Scholar]
- D. Biermann, B. Denkena, Complete reparation of complex cutting tools III, Final report of the project (in German) (2014) [Google Scholar]
- J. Fulemova, J. Rehor, Influence of Form Factor of the Cutting Edge on Tool Life during Finishing Milling, Proc. Eng., 100, 682-688, (2015) [CrossRef] [Google Scholar]
- B. Denkena, J. Koehler, M. Rehe, Influence of the Honed Cutting Edge on Tool Wear and Surface Intergrity in Slot Milling of 42CrMo4 Steel, Procedia CIRP, 1, 190-195, (2012) [CrossRef] [Google Scholar]
- B. Denkena, J. Koehler, B. Breidenstein, A.M. Abrao, C.E.H. Ventura, Influence of the cutting edge preparation method on characteristics and performance of PVD coated carbide inserts in hard turning, Surf.&Coat. Tech., 254, 447-454, (2014) [CrossRef] [Google Scholar]
- C.E.H. Ventura, J. Koehler, B. Denkena, Influence of the cutting edge geometry in interrupted hard turning, J. Manuf. Proc., 19, 129-134, (2015) [CrossRef] [Google Scholar]
- B. Denkena, D. Biermann, Cutting edge geometry, CIRP Annals - Manuf. Tech., 63, 631-653, (2014) [CrossRef] [Google Scholar]
- B. Denkena, J. Koehler, C.E.H. Ventura, Customized cutting edge preparation by means of grinding, Precision Eng., 37, 590-598, (2013) [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.