MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Section||Assembling Technologies, Forming Technologies, Additive Manufacturing|
|Published online||24 July 2018|
Geometrical analysis, for rapid prototyping, of the compressor’s helical conic rotor model
“Dunarea de Jos” University of Galati, Department of Manufacturing Engineering, Domneasca 111, Galati, Romania
* Corresponding author: firstname.lastname@example.org
The conical rotary compressor represents a solution for gases compression, for relatively small flow, in conditions of a superior energetic efficiency. Although the theoretical solution for the helical conical compressor was elaborated decades ago, a viable technology solution become possible at industrial level only after the development of machine tools with numerically controlled axes. In this paper is proposed a study, analytical and graphical, concerning the geometry of conical rotary compressor’s rotors, modelled by rapid prototyping technology. The propose modelling allow to elaborate various constructive forms for conical compressor’s rotors.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.