| Issue |
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|
|
|---|---|---|
| Article Number | 06024 | |
| Number of page(s) | 8 | |
| Section | Mechanical and Manufacturing Equipment Devices and Instrumentation | |
| DOI | https://doi.org/10.1051/matecconf/201817806024 | |
| Published online | 24 July 2018 | |
Method of axial adjustment for precessional transmissions
Technical University of Moldova, 9, Studenţilor str., Chisinau, Republic of Moldova
* Corresponding author: max_casian@yahoo.com
Axial adjustment method for precessional transmissions includes compensation error calculation, determination compensator groups, achieved in the form of base and auxiliary rings. The compensator has on the base ring axial canals in which can be placed clamping bolts but the auxiliary ring has axial holes for the screws. The auxiliary ring is formed from increasing sectors - the distance between auxiliary ring stairs and front side of body, from decreasing sectors - the distance between base ring and bottom place, and the closure element - the clearance between gear body and the front surface of the base ring. According to the method of group interchangeability is determined the deviation value of the upper and lower group tolerance and the clearance between lid and body. Then rotating one of the rings is ensured the dimension of the compensator which must match to compensation clearance value and then the compensator is adjusted to required value.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.