Open Access
Issue
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
Article Number 02007
Number of page(s) 6
Section Assembling Technologies, Forming Technologies, Additive Manufacturing
DOI https://doi.org/10.1051/matecconf/201817802007
Published online 24 July 2018
  1. D. Nasulea, G. Oancea, MSE 2017, MATEC Web of Conf., 121, 03017 (2017) [Google Scholar]
  2. S. H. Wu, Ana Reis, F. M. Andrade Pires, Abel D. Santos, A. Barata da Rocha, Advan. Mate. Res. 472-475, pp 1586-1591(2012) [CrossRef] [Google Scholar]
  3. J. Cao, Y. Huang, N. V. Reddy, R. Malhotra, Y. Wang, 9th ICTP, pp. 1967-1982, (2008) [Google Scholar]
  4. W. C. Emmens, G. Sebastiani, A. H. van den Boogaard, J. of Mate. Pro. Tech., 210 8, pp. 981-997 (2010) [CrossRef] [Google Scholar]
  5. M. A. Dittrich, T. G. Gutowski, J. Cao, J. T. Roth, Z. C. Xia, V. Kiridena, F. Ren, H. Henning, Prod. Eng., 6 2, pp. 169-77 (2012) [CrossRef] [Google Scholar]
  6. G. Ingarao, G. Ambrogio, F. Gagliardi, R. Di Lorenzo, J Cl. Prod., 29-30, pp. 255-268 (2012) [CrossRef] [Google Scholar]
  7. A. Governale, A. Lo Franco, A. Panzeca, L. Fratini, Key Eng. Mater., 344, pp. 559-566 (2007) [CrossRef] [Google Scholar]
  8. G. Ambrogio, L. De Napoli, L. Filice, F. Gagliardi, J. Mate. Pro. Tech., 162, pp. 156-162 (2005) [CrossRef] [Google Scholar]
  9. A. C. Filip, I. Neagoe, Acad. J. Manu. Eng., 8 3, pp 24-29 (2010) [Google Scholar]
  10. M. Pohlak, J. Majak, R. Küttner, Proc. Estonian Acad. Sci. Eng., 13 2, pp. 129-139 (2007) [Google Scholar]
  11. LE VAN SY, Doc. The., Dep. of Inno. In Mech. Manag., Univ. of Padua, Cycle XXII (2009) [Google Scholar]
  12. M. Pohlak, R. Küttner, J. Majak, Rapid Prot. J., 11 5, pp. 304-311 (2005) [CrossRef] [Google Scholar]
  13. T. Maki, In Int. Seminar on Novel Sheet Metal Forming Tech., Jyväskylä, Finland (2006) [Google Scholar]
  14. T. Neveux, J. T. Roth, I. Ragai, Proc. of (MSEC2016), MSEC2016-8805, (2016) [Google Scholar]
  15. M. B. Bambach, A. Taleb, H. Gerhard, Prod. Eng. 3.2, pp. 145-156 (2009) [CrossRef] [Google Scholar]
  16. T. Grimm, J. T. Roth, I. Ragai, Proc. of ASME Int. Sci. and Eng. Conf. (2016) [Google Scholar]
  17. N. T. Nam, Proc. of Ins. of Mech. Eng., Part B: J. Eng. Manuf., 227.8: pp. 1099-1110 (2013) [Google Scholar]
  18. J. R. Duflou, B. Callebaut, J. Verbert, CIRP Annals-Manuf. Tech., 56 1, pp. 273-276 (2007) [CrossRef] [EDP Sciences] [Google Scholar]
  19. J. Li, B. Tingting, Z. Zhiqiang, Int. J. of Adv. Manuf. Tech., 74.9-12, pp. 1649-1654 (2014) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.