Free Access to the whole issue

MATEC Web of Conferences

Volume 179 (2018)

2018 2^nd International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2018)

Wuhan, China, May 10-13, 2018
Dan Zhang (Ed.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 26 July 2018

PDF (49.9 kB)

Open Access

About the conference

Published online: 26 July 2018

PDF (272.9 KB)

Open Access

PREFACE 00001

Dan Zhang

Published online: 25 July 2018

DOI: https://doi.org/10.1051/matecconf/201817900001

PDF (93.03 KB)

Mechanical

Open Access

Global Existence of the Three Dimensional Heat-conductive Incompressible Viscous Fluids 01001

Jie Wu

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901001

Open Access

Universal CubeSat Platform Design Technique 01002

Zhiyong Chen

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901002

Open Access

Numerical Simulation of Nozzle Flow Field with Secondary Injection Thrust Vector Control 01003

H.R. Noaman, Tang Hai Bin and Elsayed Khalil

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901003

Open Access

Battery group parameter selection and dynamic simulation of pure electric vehicle 01004

Guo Minrui and Cheng Lei

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901004

Open Access

Effects of the Wet Steam Non-Equilibrium Condensation on the Dynamics of the Excitation-Relying Bearing-Rotor system 01005

Bing Guo, Weixiao Tang and Tianhui Zhen

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901005

Open Access

Numerical Analysis of the Strength of the Wet Steam Turbine Blade 01006

Bing Guo, Weixiao Tang, Jin Liu and Tianhui Zhen

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901006

Open Access

Load Planning of Transport Aircraft Based on Hybrid Genetic Algorithm 01007

Yang Chenguang, Liu Hu and Gao Yuan

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901007

Open Access

Effect of Ellipsoidal Modulus and Internal Pressure on Bearing Capacity of Thrust-Bearing Aft Dome 01008

Wang Peng, Fan Ruixiang, Huang Cheng, Yan Dongyang and Wang Feifan

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901008

Open Access

Effects of Airflow Deflection Angle in Diffuser on Forced Response Caused by Impeller-diffuser Interaction in Centrifugal Compressors 01009

Sun Peng, Wang Yanrong and Zhang Xiaobo

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901009

Open Access

One Micro-thrust Measurement Method Based on the Acoustoelastic Theory 01010

Yang Ou, Jianjun Wu, Yu Zhang, Jian Li and Sheng Tan

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901010

Open Access

Research on Interactive Routing of Cable in Virtual Environment 01011

Bi-le WAN, Wen-xing HE and Chang-yu CHEN

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901011

Open Access

Study on the Mechanism of a Carrier-based Engine Parts' Performance Decline and Its Impact on the Whole Engine Performance 01012

Wu Heng, Li Benwei, Zhao Shufan and Wang Yonghua

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901012

Open Access

Aeroelastic Stability of Labyrinth Seal with Different Structure Parameters 01013

Wang Nengmao and Wang Yanrong

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901013

Open Access

Thermal Cycling Toughness and Strength Estimation of Cryogenic Filled Tank 01014

Dmitry Uglanov, Dmitry Sarmin, Alina Akulova, Daria Aksenova and Roman Panshin

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901014

Open Access

A Specific Sliding Mode Control for Autopilot Design of Bank-to-Turn Missiles 01015

Zepeng Huai, Hongbo Wang, Min Gong, Pengfei Ren, Zijian Xu and Lingxiao Cheng

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901015

Open Access

Increasing the Energy Efficiency of the Power Supply System on Liquefied Natural Gas through the Use of a Combined Cycle Gas Turbine Plant 01016

S V Zaika, D A Uglanov, E A Shatokhin, S S Zaika and A A Shimanov

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901016

Open Access

Prediction Method of Equipment Degradation State Based on Improved RVM 01017

Lu Cheng, Wang RuiQi, Xu TingXue and Chen YuQi

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901017

Open Access

Hertz Model Based Contact Modeling for Joints with Clearance 01018

Jielong Wang and Bing Shi

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901018

Open Access

Dynamic Analysis of Shaft Structure Based on ANSYS/LS-DYNA 01019

Yu-ning WANG, Zhang Zhao-gang, Lin Yi-zhen and Yin Ming-ang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901019

Open Access

Research of the Frictional Characteristics of Piston Ring - Cylinder Liner Based on GT-Suite 01020

Chao-fan SHI, Pu-kai WANG, Jian-min LIU, Qi KANG and Yi DONG

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901020

Open Access

Complex Logic Control Algorithm and Simulation Application Based on Matrix Modeling 01021

Yu Li, Gang An and Xin Li

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901021

Open Access

Computer-aided Design for the Route of the Test Waveguides 01022

Wang Runze, Jian Yabin, Yin Xiaofang, Hou YaQin and Su XinMing

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901022

Open Access

Investigation on the Thermal Control Algorithm of the Heat Sink Temperature Regulating System for Thermal Vacuum Tests 01023

Jian Yabin, Zhang Chunyuan, Wang jing, Lin Boyin, Wang Runze and Yin Xiaofang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901023

Open Access

The IR Characteristics Modeling and Simulation of the HEO Target 01024

Tao Dongxing, Lin Boying, Du Peng, Bi Yanqiang, Shang Yonghong, Li Xiyuan and Wang Jing

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901024

Open Access

Research on Hot-Wire Low Pressure Wind Speed Measurement System 01025

Yin Xiaofang, Li Xiyuan, Gao Qinghua and Wang Jing

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817901025

Materials

Open Access

Research on Thermal Insulation Performance of Lightweight Thermal Protection Materials for High Speed Aircraft under Different Boundary Conditions 02001

Feng Wang, Dafang Wu and Haoyuan Ren

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817902001

Open Access

Cutting force analysis in machining of titanium alloy with solid carbide cutters of different geometriy 02002

Liu Jianyong, Qiao Lihong and Chen Wuyi

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817902002

Open Access

COMPRESSIVE PROPERTIES OF GEOPOLYMER MATRIX COMPOSITES 02003

Robin Hron, František Martaus and Martin Kadlec

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817902003

Open Access

Development of Gypsum Block of Energy Conservation and Waste Utilization 02004

Yafei Hao, Lingxiao Li, Xiongmu Chen and Fengqing Zhao

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817902004

Open Access

Charge transport mechanism of polyaniline/ZnO nanocomposites based on inorganic/organic heterojunctions 02005

Lei Han, Wen Li, Chao Meng, Yan Chen and Shan Fan

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817902005

Open Access

A New Characterization Parameter of out-of-plane Constraint for C(T) Specimens 02006

Zhao Lingyan, Cui Yinghao and Yang Fuqiang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817902006

Open Access

The Vortex Aircooler System for Cutting Materials in Aerospace Industry 02007

G.O. Belov, S.S Dostovalova, E. О. Barbonov, D.A. Uglanov, P.A. Chertykovtsev and R.A. Panshin

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817902007

Aerospace

Open Access

Parameter Research of UAV Vertical Rope-type Recovery System 03001

Chengjing Ma, Xing'an Liu and Caiwen Zhang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903001

Open Access

Integrated Guidance System of a Commercial Launch Vehicle 03002

Nickolay Zosimovych, Niu Xiaodong, Alex Noel Joseph Raj, Alessandro Simeone and Xiongbin Peng

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903002

Open Access

A Fixed Wing UAV Path Planning Algorithm Based On Genetic Algorithm and Dubins Curve Theory 03003

Peng Yan, Zhuo Yan, Hongxing Zheng and Jifeng Guo

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903003

Open Access

The design service life of wide-body commercial aircraft research based on airlines data 03004

Yue Wang, Dan Gao and Jiangtao Si

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903004

Open Access

Research on Interior Ballistic of a Gas Multi-stage Cylinder Ejection 03005

Mei Huang, Yi Jiang and Boman Wang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903005

Open Access

Unmanned Aircraft System Pilot/Operator Qualification Requirements and Training Study 03006

Shengjun Qi, Feng Wang and Li Jing

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903006

Open Access

Impact Anlysis of Bow Flap on LHA-1 Ship Airwake 03007

Jinling Wang, Guangwen Jiang, Jun Shen and Chujun Hu

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903007

Open Access

Research on Key Techniques of the Verification and Testing System for Spacecraft Propulsion 03008

Wang Junwei, Zhang Lei, Xiao Qingsheng, Li Gao, Han Xiao and Bai Bing

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903008

Open Access

Is Engineering Ethics Important for Aerospace Engineers? 03009

Sakineh Haghighattalab, An Chen and Mohammadreza Saghamanesh

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903009

Open Access

Configurations and Key Issues of Low Thrust Measurement for Microspacecrafts 03010

Wei-jing Zhou, Ji-fei Ye, Nan-lei Li and Hao Chang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903010

Open Access

Numerical Simulation of Rotor in Hover and Forward Flight 03011

Qinghe Zhao

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903011

Open Access

Rotordynamic Characteristics Analysis for an aero-engine Low Pressure Rotor Rig Test Model 03012

Huiying Song, Shaohui Wang and Kai Sun

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903012

Open Access

Increasing the Efficiency of Storage of Cryoproduct through the Introduction of Technical Solutions 03013

S V Zaika, D.K. Aksenova, E A Shatokhin and S S Zaika

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903013

Open Access

Numerical Analysis of Bypass Mass Injection on Thrust Vectoring of Supersonic Nozzle 03014

Md Shafiqul Islam, Md. Arafat Hasan and A.B.M. Toufique Hasan

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903014

Open Access

Research on Performance Seeking Control of Turbofan Engine at Cruise Status Based on Sequential Quadratic Programming Algorithm 03015

Zhao Shufan, Wu Heng, Shi Liming, Huang Cheng and Yang xinyi

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903015

Open Access

A Review for Aircraft Landing Problem 03016

Li Zipeng and Wang Yanyang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903016

Open Access

Research of Spacecraft Assembly Simulation with Ground Mechanical Equipments 03017

HE Wen-xing and CHEN Chang-yu

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903017

Open Access

Calculation Method of Stability Derivatives and Verification for Power-lift Aircraft 03018

Shi Yazhou and Wang Weijun

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903018

Open Access

Analysis of Operation of Throttle Micro-cooler at Nitrogen Use with Near-critical Parameters 03019

Dmitry Uglanov, Dmitry Sarmin, Alina Akulova, Daria Aksenova and Sophia Dostovalova

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903019

Open Access

Investigation of Flow over the Airfoil NACA 0010-35 with Various Angle of Attack 03020

Shiming Xiao and Zutai Chen

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903020

Open Access

Preliminary Validation of the Wind Tunnel Based Flight Control System Evaluation Method 03021

Min Huang, Zhong-wei Wang, Xing-Bao Yang, Zhen-yun Guo and Yao-bin Niu

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903021

Open Access

Evaluation Abilities and Requirements of the Wind Tunnel Hardware-in-the-loop Simulation for Evaluation of Missiles’ Flight Control Systems 03022

Xing-bao Yang and Min Huang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903022

Open Access

Research on LDPC Coding for Free Space Optical Communication with Modified Bessel-Gaussian Beams Based on K-distribution 03023

Jin Wang, Fujiang Zeng, Qingqing Liang and Xiaofeng Zhang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903023

Open Access

Modeling and Simulation of Mission Planning Problem for Remote Sensing Satellite Imaging 03024

Yao Pan, Zhong Ming Chi, Qi Long Rao, Kai Peng Sun and Yi Nan Liu

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903024

Open Access

Architecture Design of Aviation Fault-tolerant Computer Based on ARINC659 Bus Technology 03025

Gang An, Yu Li and Xin Li

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903025

Open Access

Robust Optimization in Airlines' Hybrid Channels Coordination with Service-Level Constraints 03026

Feifei ZHANG, Rong HU and Junfeng ZHANG

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903026

Open Access

Optimization Design of Thermal Test Waveguide Link for Communication Satellite 03027

Yu-jie SHAO, Yu Zhong-xi, Chun-lin DU and Jing WANG

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903027

Open Access

Research on Applicability of Hot-Bulb Anemometer under Low Pressure 03028

Li Xiyuan, Yin Xiaofang, Hou Yaqin, Gao Qinghua and Wang jing

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903028

Open Access

The Experimental Platform of Frosting by Vapor on Cryogenic Surface in Vacuum Environment 03029

Guo Qinliang, Qie Dianfu, Shang Yonghong, Wang Jing and Bi Yanqiang

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903029

Open Access

Method Based on SEFT-to-Petri for Safety Analysis of Software 03030

Xu Sai-sai, Chen Jing, Sun Yu-ning, Gao Xin-rui, Wang Bo-han and Wang Kun-long

Published online: 26 July 2018

DOI: https://doi.org/10.1051/matecconf/201817903030

MATEC Web of Conferences

Volume 179 (2018)

2018 2nd International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2018)

Statement of Peer review

About the conference

PREFACE 00001

Mechanical

Global Existence of the Three Dimensional Heat-conductive Incompressible Viscous Fluids 01001

Universal CubeSat Platform Design Technique 01002

Numerical Simulation of Nozzle Flow Field with Secondary Injection Thrust Vector Control 01003

Battery group parameter selection and dynamic simulation of pure electric vehicle 01004

Effects of the Wet Steam Non-Equilibrium Condensation on the Dynamics of the Excitation-Relying Bearing-Rotor system 01005

Numerical Analysis of the Strength of the Wet Steam Turbine Blade 01006

Load Planning of Transport Aircraft Based on Hybrid Genetic Algorithm 01007

Effect of Ellipsoidal Modulus and Internal Pressure on Bearing Capacity of Thrust-Bearing Aft Dome 01008

Effects of Airflow Deflection Angle in Diffuser on Forced Response Caused by Impeller-diffuser Interaction in Centrifugal Compressors 01009

One Micro-thrust Measurement Method Based on the Acoustoelastic Theory 01010

Research on Interactive Routing of Cable in Virtual Environment 01011

Study on the Mechanism of a Carrier-based Engine Parts' Performance Decline and Its Impact on the Whole Engine Performance 01012

Aeroelastic Stability of Labyrinth Seal with Different Structure Parameters 01013

Thermal Cycling Toughness and Strength Estimation of Cryogenic Filled Tank 01014

A Specific Sliding Mode Control for Autopilot Design of Bank-to-Turn Missiles 01015

Increasing the Energy Efficiency of the Power Supply System on Liquefied Natural Gas through the Use of a Combined Cycle Gas Turbine Plant 01016

Prediction Method of Equipment Degradation State Based on Improved RVM 01017

Hertz Model Based Contact Modeling for Joints with Clearance 01018

Dynamic Analysis of Shaft Structure Based on ANSYS/LS-DYNA 01019

Research of the Frictional Characteristics of Piston Ring - Cylinder Liner Based on GT-Suite 01020

Complex Logic Control Algorithm and Simulation Application Based on Matrix Modeling 01021

Computer-aided Design for the Route of the Test Waveguides 01022

Investigation on the Thermal Control Algorithm of the Heat Sink Temperature Regulating System for Thermal Vacuum Tests 01023

The IR Characteristics Modeling and Simulation of the HEO Target 01024

Research on Hot-Wire Low Pressure Wind Speed Measurement System 01025

Materials

Research on Thermal Insulation Performance of Lightweight Thermal Protection Materials for High Speed Aircraft under Different Boundary Conditions 02001

Cutting force analysis in machining of titanium alloy with solid carbide cutters of different geometriy 02002

COMPRESSIVE PROPERTIES OF GEOPOLYMER MATRIX COMPOSITES 02003

Development of Gypsum Block of Energy Conservation and Waste Utilization 02004

Charge transport mechanism of polyaniline/ZnO nanocomposites based on inorganic/organic heterojunctions 02005

A New Characterization Parameter of out-of-plane Constraint for C(T) Specimens 02006

The Vortex Aircooler System for Cutting Materials in Aerospace Industry 02007

Aerospace

Parameter Research of UAV Vertical Rope-type Recovery System 03001

Integrated Guidance System of a Commercial Launch Vehicle 03002

A Fixed Wing UAV Path Planning Algorithm Based On Genetic Algorithm and Dubins Curve Theory 03003

The design service life of wide-body commercial aircraft research based on airlines data 03004

Research on Interior Ballistic of a Gas Multi-stage Cylinder Ejection 03005

Unmanned Aircraft System Pilot/Operator Qualification Requirements and Training Study 03006

Impact Anlysis of Bow Flap on LHA-1 Ship Airwake 03007

Research on Key Techniques of the Verification and Testing System for Spacecraft Propulsion 03008

Is Engineering Ethics Important for Aerospace Engineers? 03009

Configurations and Key Issues of Low Thrust Measurement for Microspacecrafts 03010

Numerical Simulation of Rotor in Hover and Forward Flight 03011

Rotordynamic Characteristics Analysis for an aero-engine Low Pressure Rotor Rig Test Model 03012

Increasing the Efficiency of Storage of Cryoproduct through the Introduction of Technical Solutions 03013

Numerical Analysis of Bypass Mass Injection on Thrust Vectoring of Supersonic Nozzle 03014

Research on Performance Seeking Control of Turbofan Engine at Cruise Status Based on Sequential Quadratic Programming Algorithm 03015

A Review for Aircraft Landing Problem 03016

Research of Spacecraft Assembly Simulation with Ground Mechanical Equipments 03017

Calculation Method of Stability Derivatives and Verification for Power-lift Aircraft 03018

Analysis of Operation of Throttle Micro-cooler at Nitrogen Use with Near-critical Parameters 03019

Investigation of Flow over the Airfoil NACA 0010-35 with Various Angle of Attack 03020

Preliminary Validation of the Wind Tunnel Based Flight Control System Evaluation Method 03021

Evaluation Abilities and Requirements of the Wind Tunnel Hardware-in-the-loop Simulation for Evaluation of Missiles’ Flight Control Systems 03022

Research on LDPC Coding for Free Space Optical Communication with Modified Bessel-Gaussian Beams Based on K-distribution 03023

Modeling and Simulation of Mission Planning Problem for Remote Sensing Satellite Imaging 03024

Architecture Design of Aviation Fault-tolerant Computer Based on ARINC659 Bus Technology 03025

Robust Optimization in Airlines' Hybrid Channels Coordination with Service-Level Constraints 03026

Optimization Design of Thermal Test Waveguide Link for Communication Satellite 03027

Research on Applicability of Hot-Bulb Anemometer under Low Pressure 03028

The Experimental Platform of Frosting by Vapor on Cryogenic Surface in Vacuum Environment 03029

Method Based on SEFT-to-Petri for Safety Analysis of Software 03030

2018 2^nd International Conference on Mechanical, Material and Aerospace Engineering (2MAE 2018)