| Issue |
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|
|
|---|---|---|
| Article Number | 01006 | |
| Number of page(s) | 6 | |
| Section | Advanced Machining and Surface Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201817801006 | |
| Published online | 24 July 2018 | |
Theoretical considerations concerning the profile error of the thread flank
1
“Gheorghe Asachi” Technical University of Iaşi, Blvd. 59A, 700050 Iaşi, Romania
2
“Ştefan cel Mare” University of Suceava, Universităţii Street, 13, 720229 Suceava, Romania
3
Politehnica University of Bucharest, Splaiul Independenţei 313, 060042 Bucharest, Romania
4
Romanian Welding Society, Iaşi County Branch, Vasile Lupu Street, 85, Iaşi, Romania
* Corresponding author: oanad@tcm.tuiasi.ro
In the case of metric thread, a possible source of the flank error could be the position of the cutting tool edge, which could not intersect the circular cylindrical surface axis. An analytical method of approximation was applied to model the way in which the flank error is generated by considering some geometrical conditions. A theoretical simplified model was determined to highlight the influence of the thread external diameter and of the distance between the circular cylindrical surface axis and the thread rectilinear generatrix on the profile error of thread flank.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.