MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Section||Design and Analysis, CAD/CAM/CAE/CAx Technologies, Flexible Manufacturing, Automation and Robotics in Technological Processes|
|Published online||24 July 2018|
An overview of possibilities for CAM machining
“Gheorghe Asachi” Technical University of Iasi, Department of Machine Manufacturing Technology, Boulevard Dimitrie Mangeron 59A, Iasi, Romania
* Corresponding author: firstname.lastname@example.org
There is an entire array of options when you are planning a CAM machining strategy. Knowing your equipment possibilities and adjusting your software options to them has become mandatory in terms of cost and time efficiency. This paper aims to present the main options for most common software solutions used today in modern mechanical engineering which can be applied to the existing hardware manufacturing equipment found in enterprises or educational centers.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.