MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Section||Advanced Machining and Surface Engineering|
|Published online||24 July 2018|
Processing of convex complex surfaces with toroidal milling versus ball nose end mill
Technical University of Cluj-Napoca - North University Center of Baia Mare, Romania
* Corresponding author: firstname.lastname@example.org
The paper aims to analyse the processing of convex complex surfaces with toroidal milling cutters compared to spherical milling cutters. As comparison terms, surface roughness and processing time are taken into account. The main purpose of the paper is to demonstrate the usefulness of the toroidal milling tool that can be replaced in case of spherical milling cuts to improve the working time as well as the surface quality, these terms playing an important role in the processing of convex complex surfaces.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.