MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Section||Non-Conventional Technologies in Manufacture and Industry, Welding Technologies|
|Published online||24 July 2018|
Direct metallization by a plasma coating process on thermal conductive polyamide
Ansbach University of Applied Sciences, Faculty of Engineering Sciences, Residenzstr. 8, Ansbach, Germany
* Corresponding author: email@example.com
This paper describes the metallization on highly filled thermal conductive Polyamide 6 material and the influence of the process conditions of the samples on the quality of the metal deposition. In a series of tests it is establish that the quality of the injection moulding process and fillers used for the polyamide material has a significant impact on the metal deposition on the polymeric surface. Even if the same surface roughness is generated by laser structuring the adhesion of the metallic particles decreases considerably as the quality of the polymeric surface is less perfect, i.e. when more fillers appear on the surface of the sample.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.