| Issue |
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|
|
|---|---|---|
| Article Number | 01015 | |
| Number of page(s) | 6 | |
| Section | Advanced Machining and Surface Engineering | |
| DOI | https://doi.org/10.1051/matecconf/201817801015 | |
| Published online | 24 July 2018 | |
The influence of brushing on the surface quality of aluminium
Technische Universität Dresden, Institute of Manufacturing Technology, 01062 Dresden, Germany
* Corresponding author: uwe.teicher@tu-dresden.de
The extension of technical capabilities of machine centres for complete machining of components can improve their performance. In the field of sheet metal machining, the objective beside the classic milling operation was a generation of functional surfaces by face brushing. The experimental studies have probed the influence of tools and technological parameters on the surface quality. In addition to an analysis of the relevant roughness parameters the formation of the surface topography was analysed by several measurement methods. By the application of force measurement, the results of the surface quality can be interpreted additionally. It could be shown that the feed rate in contrast to the cutting speed has the main influence on the surface roughness. A peculiarity is given by the parameter-based width of cut that should be known for reliable process control. The acquired data can be applied in the form of process characteristic fields for further processing with simulation and modelling methods.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.