MATEC Web Conf.
Volume 178, 201822nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|Number of page(s)||6|
|Published online||24 July 2018|
Investigation of the geometric change of plastic articles made by polyamide
Technical University of Cluj-Napoca, Department for Manufacturing Technology, Romania
2 Johannes Gutenberg University Mainz, Germany
* Corresponding author: firstname.lastname@example.org
The following paper includes an investigation of the geometric variation of plastic workpieces in a simulated environment of normal climate by 21° / 50% relative humidity. In the industrial manufacturing, the daily quality checks are required to determine, if the plastic workpieces can be released. Due to the humidity or water absorption, the plastic workpiece grows so far that the dimensional accuracy is not given. In this investigation, the results of 12 weeks are determined and presented.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.