| Issue |
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|
|
|---|---|---|
| Article Number | 09008 | |
| Number of page(s) | 6 | |
| Section | Energy (Smart Grids, Energy Efficiency in Buildings, Energy systems and energy management, Energy policies, Environmental technologies and studies, Renewable energy technologies and energy saving materials) | |
| DOI | https://doi.org/10.1051/matecconf/201817809008 | |
| Published online | 24 July 2018 | |
The use of CPC theory for energy description of two nonlinear receivers
1
Koszalin University of Technology, Department of Mechanical Engineering, 15-17 Raclawicka St., 75-620 Koszalin, Poland
2
Technical University of Moldova, Technology of Machine Building, Republic of Moldova
3
Slovak University of Agriculture in Nitra, Trieda A. Hlinku 2, 949 76 - Nitra, Slovakia
* Corresponding author: 1. konrad.zajkowski@tu.koszalin.pl
The article concerns a mathematical description of electric power in the case of two nonlinear receivers connected to a common supply network. This description was made on the basis of the fundamental CPC (Currents' Physical Components) power theory. This theory was developed for one nonlinear receiver. In the case of two nonlinear receivers of the same type, i.e. when the harmonics generated by them are created equal, the CPC theory requires some modification. This issue is important when it is necessary to determine the components of currents in an energy system supplying two nonlinear receivers.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.