| Issue |
MATEC Web Conf.
Volume 178, 2018
22nd International Conference on Innovative Manufacturing Engineering and Energy - IManE&E 2018
|
|
|---|---|---|
| Article Number | 03004 | |
| Number of page(s) | 6 | |
| Section | Non-Conventional Technologies in Manufacture and Industry, Welding Technologies | |
| DOI | https://doi.org/10.1051/matecconf/201817803004 | |
| Published online | 24 July 2018 | |
Experimental study on reverse engineering in case of composite materials cut by water jet cutting
Technical University of Cluj-Napoca, B-dul. Muncii, No. 103-105, Cluj-Napoca, Romania
* Corresponding author: ioan.popan@tcm.utcluj.ro
The main objective of the paper consists in remanufacturing of a part, through Abrasive Water Jet Cutting, using a method of reverse engineering based on 3D scanning. The characteristics of this process, the equipment and the main applications are presented. The research starts with manufacturing of a master model made by CFRP. This master model is a complex part cut by abrasive water jet cutting. In scanning process was used the 3D Scanner Artec Space Spider and the point cloud was processed using Artec Studio 11 software. By using this new 3D model was manufactured a new part, with the same setup. The quality characteristics (accuracy and surface quality) of this part was compared with the master model. The paper presents the advantages and disadvantages of this reverse engineering method applied on abrasive water jet cutting process.
© The Authors, published by EDP Sciences, 2018.
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.