MATEC Web of Conferences

Open Access

Development of battery management systems (BMS) for electric vehicles (EVs) in Malaysia 01001

P.M.W. Salehen, M.S. Su’ait, H. Razali and K. Sopian

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001001

• Abstract
• PDF (1.771 MB)
• References

Open Access

Effect of annealing, thickness ratio and bend angle on springback of AA6061-T6 with non-uniform thickness section 01002

M.F. Adnan, A.B. Abdullah and Zahurin Samad

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001002

• Abstract
• PDF (818.0 KB)
• References

Open Access

Ergonomics study for workers at food production industry 01003

Hamizatun Mohd Fazi, Nik Mohd Zuki Nik Mohamed, Mohd Fadzil Faisae Ab Rashid and Ahmed Nasser Mohd Rose

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001003

• Abstract
• PDF (252.4 KB)
• References

Open Access

The identification of Malaysian driving styles using the multidimensional driving style inventory 01004

Juffrizal Karjanto, Nidzamuddin Md. Yusof, Jacques Terken, Muhammad Zahir Hassan, Frank Delbressine, Hanneke Hooft van Huysduynen and Matthias Rauterberg

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001004

• Abstract
• PDF (220.8 KB)
• References

Open Access

Simulating autonomous driving styles: Accelerations for three road profiles 01005

Juffrizal Karjanto, Nidzamuddin Md. Yusof, Jacques Terken, Frank Delbressine, Muhammad Zahir Hassan and Matthias Rauterberg

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001005

• Abstract
• PDF (686.5 KB)
• References

Open Access

Clustering of frequency spectrums from different bearing fault using principle component analysis 01006

M.F.M. Yusof, C.K.E. Nizwan, S.A. Ong and M.Q.M. Ridzuan

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001006

• Abstract
• PDF (738.6 KB)
• References

Open Access

Reverse engineering of B-pillar with 3D optical scanning for manufacturing of non-uniform thickness part 01007

Md. Tasbirul Islam, A.B. Abdullah and Mohamad Zihad Mahmud

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001007

• Abstract
• PDF (1.594 MB)
• References

Open Access

Development of comprehensive unattended child warning and feedback system in vehicle 01008

Norizam Sulaiman, Kamarul Hawari Ghazali, Mohd Shawal Jadin, Amran Abdul Hadi, Muhammad Sharfi Najib, Mohd Salmizan Mohd Zain, Fatimah Abdul Halim, Suhaimi Mohd Daud, Nurdiyana Zahed and Abdul Adam Abdullah

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001008

• Abstract
• PDF (2.646 MB)
• References

Open Access

Moderating effect of environmental turbulence on firm’s technological innovation capabilities (TIC) and business performance in the automotive industry in Malaysia: A conceptual framework 01009

Faridah binti Taju Rahim and Yuserrie bin Zainuddin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001009

• Abstract
• PDF (139.0 KB)
• References

Open Access

Shape memory actuated sliding mechanism for rapid switching between button-patterns for adapted human-machine interaction at different automatization levels in automobiles 01010

Manivannan Sivaperuman Kalairaj and Wei Min Huang

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001010

• Abstract
• PDF (2.087 MB)
• References

Open Access

The investigation of dynamic behaviour of a structure using wave-based substructuring method 01011

Ahmad Burhani Ahmad Basri, Muhamad Norhisham Abdul Rani, Mohd Azmi Yunus, Liyana Roslan and Wan Imaan Izhan Wan Iskandar Mirza

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001011

• Abstract
• PDF (845.5 KB)
• References

Open Access

The investigation of the dynamic behaviour of a complex assembled structure using the frequency response function based substructuring method 01012

Wan Imaan Izhan Wan Iskandar Mirza, Muhamad Norhisham Abdul Rani, Mohd Azmi Yunus, Liyana Roslan and Ahmad Burhani Ahmad Basri

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001012

• Abstract
• PDF (248.2 KB)
• References

Open Access

Response surface reconciliation method of bolted joints structure 01013

Mohd Azmi Yunus, Sharifah Nazri, Mohamad Norhisham Abdul Rani, Azela Tormodi and Salmiah Kasolang

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001013

• Abstract
• PDF (296.9 KB)
• References

Open Access

Effect of heat-treatment on the hardness and mechanical properties of Boron Alloyed Steel 01014

Mohammad Raffik bin Khiyon and Salwani Mohd Salleh

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001014

• Abstract
• PDF (843.3 KB)
• References

Open Access

State of art of cooling method for dry machining 01015

Kaaliarasan Ramachandran, Balakumaran Yeesvaran, Kumaran Kadirgama, Devarajan Ramasamy, Saiful Anwar Che Ghani and Keeran Anamalai

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001015

• Abstract
• PDF (866.2 KB)
• References

Open Access

Techno-economic and sensitivity analysis for grid-connected renewable energy electric boat charging station in Terengganu 01016

N. A. S. Salleh and W. M. W. Muda

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001016

• Abstract
• PDF (252.2 KB)
• References

Open Access

Design and development of coil casing MRF brake system 01017

R. Siti Lydia, R. Mokhtar, A.B. Muhamad Husaini and B.J. Norhaniza

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001017

• Abstract
• PDF (3.506 MB)
• References

Open Access

Effect of varying geometrical parameters of trapezoidal corrugated-core sandwich structure 01018

N.Z.M. Zaid, M.R.M. Rejab, A.F. Jusoh, D. Bachtiar and J.P. Siregar

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001018

• Abstract
• PDF (1.006 MB)
• References

Open Access

Comparison performance of split plug-in hybrid electric vehicle and hybrid electric vehicle using ADVISOR 01019

Muhammad Ikram Mohd Rashid, Hamdan Daniyal and Danial Mohamed

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001019

• Abstract
• PDF (925.4 KB)
• References

Open Access

Correlation of numerical and experimental analysis for dynamic behaviour of a body-in-white (BIW) structure 01020

N.A.Z. Abdullah, M.S.M. Sani, M.M. Rahman and I. Zaman

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001020

• Abstract
• PDF (3.279 MB)
• References

Open Access

Finite element modelling and updating of friction stir welding (FSW) joint for vibration analysis 01021

Siti Norazila Zahari, Mohd Shahrir Mohd Sani and Mahadzir Ishak

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001021

• Abstract
• PDF (2.331 MB)
• References

Open Access

The study of stability, combustion characteristics and performance of water in diesel emulsion fuel 01022

Zulkifli Syafiq, Othman Fahmi, Omar. I Awad and Abdullah Adam

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001022

• Abstract
• PDF (173.1 KB)
• References

Open Access

Engine performance testing using variable RON95 fuel brands available in Malaysia 01023

Aizuddin Fahmi Mohd Riduan, Noreffendy Tamaldin and Ahmad Kamal Mat Yamin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001023

• Abstract
• PDF (556.4 KB)
• References

Open Access

The effect of fiber laser parameters on microhardness and microstructure of duplex stainless steel 01024

Ghusoon R. Mohammed, M. Ishak, S. N. Aqida and Hassan A. Abdulhadi

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001024

• Abstract
• PDF (1.954 MB)
• References

Open Access

Identification of damage based on frequency response function (FRF) data 01025

M. S. A. Sulaiman, M. A. Yunus, A. R. Bahari and M. N. Abdul Rani

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001025

• Abstract
• PDF (1.149 MB)
• References

Open Access

Finite element simulation of twist forming process to study twist springback pattern 01026

M. N. Nashrudin and A. B. Abdullah

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001026

• Abstract
• PDF (149.8 KB)
• References

Open Access

Influence of rear-roof spoiler on the aerodynamic performance of hatchback vehicle 01027

See-Yuan Cheng and Shuhaimi Mansor

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001027

• Abstract
• PDF (1.675 MB)
• References

Open Access

Prediction of available power being generate in small hydropower system at Sungai Perting Bentong Pahang 01028

M. Razi, M.A. Yusuff, B.T. Tee and K.A. Zakaria

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001028

• Abstract
• PDF (912.1 KB)
• References

Open Access

A review on failure characteristics of polymer gear 01029

Wafiuddin Md Ghazali, Daing Mohamad Nafiz Daing Idris, Azizul Helmi Sofian, Januar Parlaungan Siregar and Ismail Ali Abdul Aziz

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001029

• Abstract
• PDF (383.1 KB)
• References

Open Access

Theoretical modelling of a beam with attached spring-mass-damper system 01030

Syaiful Azmirul Mohd Rozlan, Izzuddin Zaman, Bukhari Manshoor, Amir Khalid, Shiau Wei Chan and Mohd Shahrir Mohd Sani

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001030

• Abstract
• PDF (557.4 KB)
• References

Open Access

Prevalence of distracted pedestrians while crossing: a study of Malaysia’s situation 01031

S. Mohd Syazwan, Md. Deros Baba, H. Nur Zarifah, A. Aqbal Hafeez and P. Noor Faradila

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001031

• Abstract
• PDF (552.4 KB)
• References

Open Access

Effect of fiber laser parameters on laser welded AZ31B Magnesium alloys 01032

Naqiuddin Mat Salleh, Mahadzir Ishak and Fadhlur Rahman Romlay

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001032

• Abstract
• PDF (1.335 MB)
• References

Open Access

Assessing retro-reflective markers (RRMs) usage on heavy vehicles with respect to MS 828:2011 01033

M.R Mohd Amirudin, Z.A Ahmad Noor Syukri and Kak D-Wing

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001033

• Abstract
• PDF (404.6 KB)
• References

Open Access

Real time emergency auto parking system in driver lethargic state for accident preventing 01034

Mohammed Hayyan Alsibai, Syafiq Fauzi Kamarulzaman, Hossam Adden Alfarra and Yasir Hashim Naif

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001034

• Abstract
• PDF (2.199 MB)
• References

Open Access

Magnetic flux gradient observation during fatigue crack propagation: A case study of SAE 1045 carbon steel used for automotive transmission parts 01035

S.R. Ahmad, A. Arifin, S. Abdullah and S.A.N. Mohamed

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001035

• Abstract
• PDF (833.7 KB)
• References

Open Access

Investigation of emissions characteristics of secondary butyl alcohol-gasoline blends in a port fuel injection spark ignition engine 01036

I.M. Yusri, Rizalman Mamat, A. Aziz, A.F. Yusop, Omar I. Awad and S.M. Rosdi

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001036

• Abstract
• PDF (505.2 KB)
• References

Open Access

Investigating bending strength of spur gear: A review 01037

Ismail Ali Abdul Aziz, Daing Mohamad Nafiz Daing Idris and Wafiuddin Mohd Ghazali

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001037

• Abstract
• PDF (569.6 KB)
• References

Open Access

The future of end-of-life vehicles (elv) in Malaysia – A feasibility study among car users in Klang valley 01038

Zulhaidi Mohd Jawi, Mohd Hafzi Md Isa, Mohd Syazwan Solah, Aqbal Hafeez Ariffin, Akmalia Shabadin and Mohd Rasid Osman

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001038

• Abstract
• PDF (277.0 KB)
• References

Open Access

Finite element analysis of hybrid energy harvesting of piezoelectric and electromagnetic 01039

Muhammad Ammar Faris Muhammad Yazid, Norlida Jamil, Nik Nurul Husna Muhmed Razali and Ahmad Razlan Yusoff

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001039

• Abstract
• PDF (319.3 KB)
• References

Open Access

Vehicle accelerated corrosion test procedures for automotive in Malaysia 01040

Liza Anuar, Astuty Amrin, Roslina Mohammad and Ali Ourdjini

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001040

• Abstract
• PDF (1.192 MB)
• References

Open Access

Biodiesel unsaturation degree effects on diesel engine NOx emissions and cotton wick flame temperature 01041

Mohd Fareez Edzuan Abdullah, Sim Shu Zhing and Clarence Bilong Bugik

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001041

• Abstract
• PDF (1.806 MB)
• References

Open Access

Study on Differential Regenerative Braking Torque Control to Increase the Stability of the Small Electric Vehicle with Four In-Wheel Motors 01042

N. M. Ali, M. H. Peeie, M. A. H. Rasid and H. Ogino

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001042

• Abstract
• PDF (374.4 KB)
• References

Open Access

Structural dynamic investigation of frame structure with bolted joints 01043

M.H.N. Izham, N.A.Z. Abdullah, S.N. Zahari and M.S.M. Sani

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001043

• Abstract
• PDF (1.025 MB)
• References

Open Access

Perodua Myvi engine fuel consumption map and fuel economy vehicle simulation on the drive cycles based on Malaysian roads 01044

Muhammad Iftishah Ramdan

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001044

• Abstract
• PDF (390.8 KB)
• References

Open Access

Simulation model for different bolted precombustion chamber (PCC) for spark ignition engine 01045

Khairil Amri Muhamad Tajuddin, Musthafah Mohd Tahir, Mohd Azli Salim, Muhd Ridzuan Mansor, Mohd Zaid Akop and Adzni Md. Saad

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001045

• Abstract
• PDF (2.781 MB)
• References

Open Access

Nanostructure and oxidation properties investigation of engine using Jatropha biodiesel as engine fuel 01046

Mohd Aznan Abdul Latif, Ahmad Anas Yusof, Ahmad Zaki Shukor, Farah Aqilah Habidi, Nur Fathiah Mohd Nor, Mohd Zaid Akop, Mohd Hafidzal mohd Hanafi and Aiman Roslizar

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001046

• Abstract
• PDF (939.0 KB)
• References

Open Access

Analysis of reconfigurable assembly system framing systems in automotive industry 01047

Mohamad Zamri Md Zain, Ahmad Majdi Abdul Rani and Mohd Amin Abd Majid

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001047

• Abstract
• PDF (664.1 KB)
• References

Open Access

Lean manufacturing implementation in reducing waste for electronic assembly line 01048

Nurul Husna Zakaria, Nik Mohd Zuki Nik Mohamed, Mohd Fadzil Faisae Ab Rahid and Ahmad Nasser Mohd Rose

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001048

• Abstract
• PDF (637.7 KB)
• References

Open Access

Preparation and stability of silicone dioxide dispersed in polyalkylene glycol based nanolubricants 01049

M.Z. Sharif, W.H. Azmi, A.A.M. Redhwan and N.M.M. Zawawi

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001049

• Abstract
• PDF (597.7 KB)
• References

Open Access

Development of nanolubricant automotive air conditioning (AAC) test rig 01050

A.A.M. Redhwan, W.H. Azmi, M.Z. Sharif and Ftwi Y. Hagos

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001050

• Abstract
• PDF (408.1 KB)
• References

Open Access

Thermal conductivity enhancement of Al₂O₃ and SiO₂ nanolubricants for application in automotive air conditioning (AAC) system 01051

A.A.M. Redhwan, W.H. Azmi, M.Z. Sharif and N.N.M. Zawawi

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001051

• Abstract
• PDF (657.9 KB)
• References

Open Access

Simulation of storage performance on hydropneumatic driveline in dual hybrid hydraulic passenger car 01052

Faizil Wasbari, Rosli Abu Bakar, Leong Ming Gan, Ahmad Anas Yusof and Zarina Amat Jafar

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001052

• Abstract
• PDF (379.5 KB)
• References

Open Access

Diesel engine performance and exhaust emission analysis using diesel-organic germanium fuel blend 01053

Zulkifli Syafiq, Othman Fahmi, Nurul Syuhaida, Ang F. Chen and Abdullah Adam

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001053

• Abstract
• PDF (380.3 KB)
• References

Open Access

The effect of tap water emulsified fuel on exhaust emission of single cylinder compression ignition engine 01054

Nurul Aiyshah Mazlan, Wira Jazair Yahya, Ahmad Muhsin Ithnin and Mohamad Azrin Ahmad

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001054

• Abstract
• PDF (496.7 KB)
• References

Open Access

Methods of preparing internal combustion engine cylinder bore surfaces for frictional improvement 01055

Kong Chung Hwa, D. Ramasamy, K. Kadirgama, M. M. Noor, M. M. Rahman and M. Samykano

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001055

• Abstract
• PDF (1.363 MB)
• References

Open Access

Exploring cycle crash characteristics in Malaysia 01056

A. Hamzah, A. H. Ariffin, M. S. Solah, N. F. Paiman and M. R. Osman

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001056

• Abstract
• PDF (375.5 KB)
• References

Open Access

Study on waste heat recovery from exhaust gas spark ignition (S.I.) engine using steam turbine mechanism 01057

Kamarulhelmy Talib, Safarudin G. Herawan, Musthafah M. Tahir, Azma Putra and Shamsul A. Shamsudin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001057

• Abstract
• PDF (1.234 MB)
• References

Open Access

Dimensional accuracy of internal cooling channel made by selective laser melting (SLM) And direct metal laser sintering (DMLS) processes in fabrication of internally cooled cutting tools 01058

S. A. C. Ghani, M. H. Zakaria, W. S. W. Harun and Z. Zaulkafilai

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001058

• Abstract
• PDF (944.8 KB)
• References

Open Access

Stability behavior of non-surfactant water-in-diesel emulsion fuel using microscopic observation 01059

Siti Amiliyana Norazni, Wira Jazair Yahya, Ahmad Muhsin Ithnin, Hasanuddin Abd Kadir, Ili Fatimah Abd Razak, Nadia Dayana Bahar, Dhani Avianto Sugeng and Nur Atiqah Ramlan

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001059

• Abstract
• PDF (2.845 MB)
• References

Open Access

Platooning strategy of mobile robot: simulation and experiment 01060

K. Baarath, Muhammad Aizzat Zakaria, M.V. Suparmaniam and Mohd Yazid bin Abu

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001060

• Abstract
• PDF (576.5 KB)
• References

Open Access

Magnetic field simulation of a thermal conductivity measurement instrument for magnetorheological fluid 01061

M.S.A. Rahim, I. Ismail, S.A. Wahid, S. Aid and S.N. Aqida

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001061

• Abstract
• PDF (616.4 KB)
• References

Open Access

An investigation on the surface finish of sculptured surface utilizing reverse engineering data of crank case cover – (CATIA V5 & DELCAM) 01062

Sundi Syahrul Azwan, Jumali Muhammad Syafik, Raffay Mohamad Razly and R.Abdullah R. Izamshah

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001062

• Abstract
• PDF (2.545 MB)
• References

Open Access

Ergonomic study on human-powered vehicles 01063

Mohd Azman Abdullah, Mohamad Haziq Abdul Rahman, Muhammad Zakwan Azis, Shamsul Anuar Shamsudin, Faiz Redza Ramli and Mohd Nizam Sudin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001063

• Abstract
• PDF (1.852 MB)
• References

Open Access

An overview of the Oil Palm Empty Fruit Bunch (OPEFB) potential as reinforcing fibre in polymer composite for energy absorption applications 01064

M.K. Faizi, A.B. Shahriman, M.S. Abdul Majid, B.M.T. Shamsul, Y.G. Ng, S.N. Basah, E.M. Cheng, M. Afendi, M.R. Zuradzman, Khairunizam Wan and D. Hazry

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001064

• Abstract
• PDF (336.9 KB)
• References

Open Access

Numerical study on dissimilar guide vane design with SCC piston for air and emulsified biofuel mixing improvement 01065

Mohd Fadzli Hamid, Mohamad Yosof Idroas, Mohd Hafif Basha, Shukriwani Sa’ad, Sharzali Che Mat, Muhammad Khalil Abdullah and Zainal Alimuddin Zainal Alauddin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001065

• Abstract
• PDF (243.6 KB)
• References

Open Access

Pedestrian-motorcycle collisions: associated risks and issues 01066

Aqbal Hafeez Ariffin, Azhar Hamzah, Mohd Syazwan Solah, Noor Faradila Paiman, Siti Fairos Mat Hussin and Mohd Rasid Osman

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001066

• Abstract
• PDF (381.7 KB)
• References

Open Access

Steady flow and dynamic analyses comparison of an air intake breathing capacity 01067

Nur Adila Mohamad Shafie, Mohd Farid Muhamad Said, Azhar Abdul Aziz, Zulkarnain Abdul Latiff, Ahmad Kamal Mat Yamin and Noreffendy Tamaldin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001067

• Abstract
• PDF (1.546 MB)
• References

Open Access

The effect of orifice diameter in constant volume chamber to spray characteristics in diesel engine using computational fluid dynamic 01068

A. R. Andsaler, A. Khalid, N. S. A. Abdullah and N. Jaat

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001068

• Abstract
• PDF (1.117 MB)
• References

Open Access

Autonomous mobile robot localization using Kalman filter 01069

Nabil Zhafri Mohd Nasir, Muhammad Aizzat Zakaria, Saifudin Razali and Mohd Yazid bin Abu

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001069

• Abstract
• PDF (502.5 KB)
• References

Open Access

Effect on human metabolic rate of skin temperature in an office occupant 01070

Rosli Abu Bakar, Norfadzilah Jusoh, Ahmad Rasdan Ismail and Tanti Zanariah Shamshir Ali

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001070

• Abstract
• PDF (208.8 KB)
• References

Open Access

Numerical investigation on soot particles emission in compression ignition diesel engine by using particulate mimic soot model 01071

Fadzli Ibrahim, Wan Mohd Faizal Wan Mahmood, Shahrir Abdullah and Mohd Radzi Abu Mansor

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001071

• Abstract
• PDF (972.8 KB)
• References

Open Access

Investigation of passenger car using Macpherson strut for suspension system pt.1: Vehicle behaviour variation of time response 01072

Tanti Ali, Rosli Abu Bakar, Gan Leong Meng and Zarina Amat Jafar

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001072

• Abstract
• PDF (406.5 KB)
• References

Open Access

Effects of fractal grid on emissions in burner combustion by using fuel-water-air premix injector derived from biodiesel crude palm oil (CPO) base 01073

Mirnah Suardi, Amir Khalid, Mohd Azahari Razali, Azwan Sapit and Shahrin Hisham Amirnordin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001073

• Abstract
• PDF (425.0 KB)
• References

Open Access

Predicting the performances of a CAMPRO engine retrofitted with liquefied petroleum gas (LPG) system using 1-dimensional software 01074

M. Hazeem Kamaruddin, Shahrul Azmir Osman, Mas Fawzi, Norrizal Mustaffa and Mohd Mustaqim Tukiman

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001074

• Abstract
• PDF (665.3 KB)
• References

Open Access

Investigating the influences of liquid LPG injection on spark ignition (SI) engine 01075

Mohd Mustaqim Tukiman, Norrizal Mustaffa, Mas Fawzi and Shahrul Azmir Osman

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001075

• Abstract
• PDF (218.6 KB)
• References

Open Access

Experimental study on the effect of alternator speed to the car charging system 01076

Rozdman K. Mazlan, Reduan M. Dan, Mohd Z. Zakaria and Abdul H. A. Hamid

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001076

• Abstract
• PDF (826.2 KB)
• References

Open Access

Omnidirectional configuration and control approach on mini heavy loaded forklift autonomous guided vehicle 01077

Norsharimie Adam, Mohd Aiman, Wan Mohd Nafis, Addie Irawan, Mohamad Muaz, Mohamad Hafiz, Akhtar Razul Razali and Sheikh Norhasmadi Sheikh Ali

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001077

• Abstract
• PDF (2.301 MB)
• References

Open Access

Transient modelling of heat loading of phase change material for energy storage 01078

W.M. Asyraf, Anusuiah Vasu, Ftwi Y. Hagos, M. M. Noor and Rizalman Mamat

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001078

• Abstract
• PDF (343.5 KB)
• References

Open Access

Study of fuel inlet temperature variations on palm biodiesel operating with a diesel engine 01079

Mohd Hafizil Mat Yasin, Rizalman Mamat, Ahmad Fitri Yusop, Mohd Hafiz Ali and Mohamad Izuan Izzudin

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001079

• Abstract
• PDF (112.6 KB)
• References

Open Access

Investigation of diesel-ethanol blended fuel properties with palm methyl ester as co-solvent and blends enhancer 01080

Norhidayah Mat Taib, Mohd Radzi Abu Mansor, Wan Mohd Faizal Wan Mahmood, Fais Ahmad Shah and Nik Rosli Nik Abdullah

Published online: 20 December 2016

DOI: https://doi.org/10.1051/matecconf/20179001080

• Abstract
• PDF (1.052 MB)
• References