Open Access
Issue |
MATEC Web Conf.
Volume 90, 2017
The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016)
|
|
---|---|---|
Article Number | 01020 | |
Number of page(s) | 10 | |
DOI | https://doi.org/10.1051/matecconf/20179001020 | |
Published online | 20 December 2016 |
- M. Imregun and W. J. Visser, “A review of model updating techniques,“ Shock Vib. Dig., 1991. [Google Scholar]
- M. I. Friswell and J. E. Mottershead, Finite element model updating in structural dynamics, vol. 38. 1995. [CrossRef] [Google Scholar]
- D. J. Ewins, “Model validation: Correlation for updating,“ Sadhana, vol. 25. pp. 221–234, 2000. [CrossRef] [Google Scholar]
- A. Bagchi, “Updating the Mathematical Model of a Structure Using Vibration Data,” J. Vib. Control, vol. 11, no. 12, pp. 1469–1486, Dec. 2005. [CrossRef] [Google Scholar]
- N. A. Husain, H. H. Khodaparast, A. Snaylam, S. James, G. Dearden, and H. Ouyang, “Finite-element modelling and updating of laser spot weld joints in a top-hat structure for dynamic analysis,” Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci., vol. 224, no. 4, pp. 851–861, Apr. 2010. [CrossRef] [Google Scholar]
- O. C. Zienkiewicz and R. L. Taylor., The Finite Element Method Vol. 1. 1994. [Google Scholar]
- M. I. Friswell, J. E. Mottershead, and H. Ahmadian, “Finite-element model updating using experimental test data: parametrization and regularization,” Philos. Trans. R. Soc. London, Ser. A (Mathematical, Phys. Eng. Sci., vol. 359, pp. 169–186, 2001. [CrossRef] [Google Scholar]
- G. Banwell, S. Mohr, S. Rothberg, and J. Roberts, “Using experimental modal analysis to validate a finite element model of a tennis racket,“ Procedia Eng., vol. 34, pp. 688–693, 2012. [CrossRef] [Google Scholar]
- E. Reynders, “System Identification Methods for (Operational) Modal Analysis: Review and Comparison,” Arch. Comput. Methods Eng., vol. 19, no. 1, pp. 51–124, 2012. [Google Scholar]
- N. A. Z. Abdullah, M. S. M. Sani, M. M. Rahman, and I. Zaman, “A review on model updating in structural dynamics,” IOP Conf. Ser. Mater. Sci. Eng., vol. 100, no. 1, p. 012015, Dec. 2015. [CrossRef] [Google Scholar]
- N. A. Husain, H. H. Khodaparast, A Snaylam, S. James, M. Sharp, G. Dearden, and H. Ouyang, “Modal testing and finite element model updating of laser spot welds,“ J. Phys. Conf. Ser., vol. 181, p. 012024, Aug. 2009. [CrossRef] [Google Scholar]
- J. E. Mottershead, M. Link, and M. I. Friswell, “The sensitivity method in finite element model updating: A tutorial,” Mech. Syst. Signal Process., vol. 25, no. 7, pp. 2275–2296, Oct. 2011. [Google Scholar]
- Q. Yuan, “Dual approaches to finite element model updating,” J. Comput. Appl. Math., vol. 236, no. 7, pp. 1851–1861, 2012. [CrossRef] [Google Scholar]
- C. Zang, S. C. Ma, and M. I. Friswell, “Structural model updating with an improved updating parameter selection method,” Proceedings of the International Conference on Noise and Vibration Engineering ISMA 2012, 2012. [Google Scholar]
- S. N. Zahari, M. S. M. Sani, N. A. Husain, M. Ishak, and I. Zaman, “Dynamic Analysis Of Friction Stir Welding Joints In Dissimilar Material Plate Structure,” J. Teknol., vol. 78, no. 6–9, 2016. [Google Scholar]
- Q. Yuan, “A constrained matrix least-squares problem in structural dynamics model updating,“ J. Comput. Appl. Math., vol. 280, pp. 367–376, May 2015. [CrossRef] [Google Scholar]
- H. Sun and R. Betti, “A Hybrid Optimization Algorithm with Bayesian Inference for Probabilistic Model Updating,” Comput. Civ. Infrastruct. Eng., vol. 30, no. 8, pp. 602–619, Aug. 2015. [CrossRef] [Google Scholar]
- J. Zapico-Valle, R. Alonso-Camblor, M. P. González-Martínez, and M. García-Diéguez, “A new method for finite element model updating in structural dynamics,“ Mech. Syst. Signal Process., vol. 24, pp. 2137–2159, 2010. [Google Scholar]
- S. Adhikari and M. I. Friswell, “Distributed parameter model updating using the Karhunen–Loève expansion,” Mech. Syst. Signal Process., vol. 24, no. 2, pp. 326–339, Feb. 2010. [CrossRef] [Google Scholar]
- W. Wang, J. E. Mottershead, A. Ihle, T. Siebert, and H. Reinhard Schubach, “Finite element model updating from full-field vibration measurement using digital image correlation,” J. Sound Vib., vol. 330, no. 8, pp. 1599–1620, Apr. 2011. [CrossRef] [Google Scholar]
- B. J. Schwarz and M. H. Richardson, “Experimental modal analysis,” in CSI Reliability Week, Orlando, FL, 1999, pp. 1–12. [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.