Issue |
MATEC Web Conf.
Volume 90, 2017
The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016)
|
|
---|---|---|
Article Number | 01043 | |
Number of page(s) | 9 | |
DOI | https://doi.org/10.1051/matecconf/20179001043 | |
Published online | 20 December 2016 |
Structural dynamic investigation of frame structure with bolted joints
1 Advanced Structural Integrity and Vibrational Research Group (ASIVR), Faculty of Mechanical Engineering, Universiti Malaysia Pahang
2 Automotive Engineering Center, Universiti Malaysia Pahang
* Corresponding author: mshahrir@ump.edu.my
Frame structure is widely used in many engineering structures. Besides, vibrational problem is one of the main challenges in industry. Bolted joints are commonly used in industry to connect two or more mechanical parts and it plays a significant role in the dynamics characteristic of the structure. This study aims to perform a model updating procedure on a portal frame structure which consists of bolted joints. Modal parameters such as the natural frequencies, mode shapes and damping ratios are gathered through finite element analysis (FEA) and experimental modal analysis (EMA). Frame structure is set to be fixed-free boundary condition and equivalence of nodes is performed at the area of bolted joints. Correlation between these two sets of data is carried out. With the selected parameters identified to perform model updating on the structure by using sensitivity analysis, the discrepancies in natural frequencies were reduced between FEA and EMA.
© The Authors, published by EDP Sciences, 2017
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.