Open Access
| Issue |
MATEC Web Conf.
Volume 90, 2017
The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016)
|
|
|---|---|---|
| Article Number | 01032 | |
| Number of page(s) | 12 | |
| DOI | https://doi.org/10.1051/matecconf/20179001032 | |
| Published online | 20 December 2016 | |
- E. Assunção, L. Quintino, and R. Miranda, “Comparative study of laser welding in tailor blanks for the automotive industry,” The International Journal of Advanced Manufacturing Technology, vol. 49, pp. 123-131, 2009. [CrossRef] [Google Scholar]
- G. V. Moskvitin, A. N. Polyakov, and E. M. Birger, “Application of laser welding methods in industrial production,” Welding International, vol. 27, pp. 572-580, 2013. [CrossRef] [Google Scholar]
- J. Ahn, L. Chen, C. M. Davies, and J. P. Dear, “Parametric optimisation and microstructural analysis on high power Yb-fibre laser welding of Ti–6Al–4V,” Optics and Lasers in Engineering, vol. 86, pp. 156-171, 2016. [CrossRef] [Google Scholar]
- R. Lai, Y. Cai, Y. Wu, F. Li, and X. Hua, “Influence of absorbed nitrogen on microstructure and corrosion resistance of 2205 duplex stainless steel joint processed by fiber laser welding,” Journal of Materials Processing Technology, vol. 231, pp. 397–405, 2016. [CrossRef] [Google Scholar]
- I. Bunaziv, O. M. Akselsen, A. Salminen, and A. Unt, “Fiber laser-MIG hybrid welding of 5mm 5083 aluminum alloy,” Journal of Materials Processing Technology, vol. 233, pp. 107–114, 2016. [Google Scholar]
- M. Harooni, B. Carlson, and R. Kovacevic, “Detection of defects in laser welding of AZ31B magnesium alloy in zero-gap lap joint configuration by a real-time spectroscopic analysis,” Optics and Lasers in Engineering, vol. 56, pp. 54-66, 2014. [CrossRef] [Google Scholar]
- M. Harooni, J. Ma, B. Carlson, and R. Kovacevic, “Two-pass laser welding of AZ31B magnesium alloy,” Journal of Materials Processing Technology, vol. 216, pp. 114-122, 2015. [CrossRef] [Google Scholar]
- M. Ishak, K. Yamasaki, and K. Maekawa, “Lap Fillet Welding of Thin Sheet AZ31 Magnesium Alloy with Pulsed Nd:YAG Laser,” Journal of Solid Mechanics and Materials Engineering, vol. 3, pp. 1045–1056, 2009. [CrossRef] [Google Scholar]
- M. Ishak, K. Yamasaki, and K. Maekawa, “Lap Fillet Laser Welding of AZ31B Thin Sheet Magnesium Alloy using Silver Nanoparticles,” Journal of Solid Mechanics and Materials Engineering, vol. 4, pp. 51-62, 2010. [CrossRef] [Google Scholar]
- Z. D.T. Yan Yong, Qiu Cheng, Zhang Wen, “Dissimilar friction stir welding between 5052 aluminum alloy and AZ31 magnesium alloy,” Transaction of Nonferrous Metal Society China, vol. 20, pp. 619–623, 2010. [CrossRef] [Google Scholar]
- X. Cao, W. Wallace, J. P. Immarigeon, and C. Poon, “Research and Progress in Laser Welding of Wrought Aluminum Alloys. II. Metallurgical Microstructures, Defects, and Mechanical Properties,” Materials and Manufacturing Processes, vol. 18, pp. 23-49, 2003. [CrossRef] [Google Scholar]
- X.-N. Gu and Y.-F. Zheng, “A review on magnesium alloys as biodegradable materials,” Frontiers of Materials Science in China, vol. 4, pp. 111-115, 2010. [Google Scholar]
- S. Fleming, “An Overview of Magnesium based Alloys for Aerospace and Automotive Application,” MASTER OF ENGINEERING IN MECHANICAL ENGINEERING, Faculty of Rensselaer Polytechnic Institute, Rensselaer Polytechnic Institute, 2012. [Google Scholar]
- H. Hiraga, T. Inoue, S. Kamado, and Y. Kojima, “Effects of the shielding gas and laser wavelength in laser welding magnesium alloy sheets,” Welding International, vol. 16, pp. 442-450, 2002. [CrossRef] [Google Scholar]
- S. Katayama, H. Nagayama, M. Mizutani, and Y. Kawahito, “Fibre laser welding of aluminium alloy,” Welding International, vol. 23, pp. 744-752, 2009. [CrossRef] [Google Scholar]
- R. S. Coelho, A. Kostka, H. Pinto, S. Riekehr, M. Koçak, and A. R. Pyzalla, “Microstructure and mechanical properties of magnesium alloy AZ31B laser beam welds,” Materials Science and Engineering: A, vol. 485, pp. 20-30, 2008. [CrossRef] [Google Scholar]
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.