Open Access
Issue
MATEC Web Conf.
Volume 90, 2017
The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016)
Article Number 01029
Number of page(s) 10
DOI https://doi.org/10.1051/matecconf/20179001029
Published online 20 December 2016
  1. R. L. Mort, Machine Elements in Mechanical Design: Pearson Education South Asia Pte Ltd, (2006). [Google Scholar]
  2. J. L. Elmquist. Deciding When to Go Plastic. Gear Technology. 46–47 (2014). [Google Scholar]
  3. A. G. M. Association, “Standard 1106-A97. Tooth Proportions for Plastic Gears,” ed. Washington DC: American Gear Manufacturers Association. [Google Scholar]
  4. B. S. Institution, “BS 6168. Specification for non-metallic spur gears,” ed. London, (1987). [Google Scholar]
  5. K. M. Marshek and P. K. C. Chan, “Qualitative analysis of plastic worm and worm gear failures,” Wear, vol. 66, pp. 261–271, 1981/02/16 (1981). [CrossRef] [Google Scholar]
  6. H. J. Watson, “5–Wear of gears,” Tribology, 2, pp. 212–216, 1969/11/01 (1969). [CrossRef] [Google Scholar]
  7. B. A. Shaw, J. T. Evans, T. F. Page, “Scanning electron acoustic microscopy imaging of sub-surface microcracks produced in gear fatigue,” Journal of Materials Science Letters, 13, pp. 1551–1554, (1994). [CrossRef] [Google Scholar]
  8. K. Mao, W. Li, C. J. Hooke, and D. Walton, “Friction and wear behaviour of acetal and nylon gears,” Wear, 267, pp. 639–645, 6/15/ (2009). [CrossRef] [Google Scholar]
  9. W. Li, A. Wood, R. Weidig, and K. Mao, “An investigation on the wear behaviour of dissimilar polymer gear engagements,” Wear, 271, pp. 2176–2183, Jul 29 (2011). [CrossRef] [Google Scholar]
  10. K. Mao, P. Langlois, Z. Hu, K. Alharbi, X. Xu, M. Milson, et al., “The wear and thermal mechanical contact behaviour of machine cut polymer gears,” Wear, 332–333, pp. 822–826, 5// (2015). [CrossRef] [Google Scholar]
  11. S. Senthilvelan and R. Gnanamoorthy, “Damage Mechanisms in Injection Molded Unreinforced, Glass and Carbon Reinforced Nylon 66 Spur Gears,” Applied Composite Materials, 11, pp. 377–397, (2004). [CrossRef] [Google Scholar]
  12. S. Senthilvelan and R. Gnanamoorthy, “Effect of rotational speed on the performance of unreinforced and glass fiber reinforced Nylon 6 spur gears,” Materials & Design, 28, pp. 765–772, // (2007). [CrossRef] [Google Scholar]
  13. H. İmrek, “Performance improvement method for Nylon 6 spur gears,” Tribology International, 42, pp. 503–510, 3// (2009). [CrossRef] [Google Scholar]
  14. H. Düzcükoğlu, “Study on development of polyamide gears for improvement of loadcarrying capacity,” Tribology International, 42, pp. 1146–1153, 8// (2009). [CrossRef] [Google Scholar]
  15. S. Senthilvelan and R. Gnanamoorthy, “Selective Carbon Fiber Reinforced Nylon 66 Spur Gears: Development and Performance,” Applied Composite Materials, 13, pp. 43–56, (2006). [CrossRef] [Google Scholar]
  16. A. R. Breeds, S. N. Kukureka, K. Mao, D. Walton, and C. J. Hooke, “Wear behavior of acetal gear pairs,” Wear,166, pp. 85–91, 1993/06/15 (1993). [CrossRef] [Google Scholar]
  17. H. Düzcükoğlu, R. Yakut, and E. Uysal, “The Use of Cooling Holes to Decrease the Amount of Thermal Damage on a Plastic Gear Tooth,” Journal of Failure Analysis and Prevention, 10, pp. 545–555, (2010). [CrossRef] [Google Scholar]
  18. K. D. Dearn, T. J. Hoskins, D. G. Petrov, S. C. Reynolds, and R. Banks, “Applications of dry film lubricants for polymer gears,” Wear,. 298–299, pp. 99–108, 2/15/ 2013. [CrossRef] [Google Scholar]
  19. N. A. Wright and S. N. Kukureka, “Wear testing and measurement techniques for polymer composite gears,” Wear, 251, pp. 1567–1578, 10//( 2001). [CrossRef] [Google Scholar]
  20. C. H. Kim, “Durability improvement method for plastic spur gears,” Tribology International, 39, pp. 1454–1461, 11// (2006). [CrossRef] [Google Scholar]
  21. S. Yousef, T. A. Osman, A. Abdalla, and G. Zohdy, “Wear Characterization of Carbon Nanotubes Reinforced Acetal Spur, Helical, Bevel and Worm Gears Using a TS Universal Test Rig,” JOM, pp. 1–8, 2014/12/23(2014). [Google Scholar]
  22. S. Yousef, A. Khattab, M. Zaki, and T. A. Osman, “Wear Characterization of Carbon Nanotubes Reinforced Polymer Gears,” Nanotechnology, IEEE Transactions on, 12, pp. 616–620, (2013). [CrossRef] [Google Scholar]
  23. A. Pogačnik and J. Tavčar, “An accelerated multilevel test and design procedure for polymer gears,” Materials & Design, 65, pp. 961–973, 1// 2015. [CrossRef] [Google Scholar]
  24. A. J. Mertens and S. Senthilvelan, “Effect of Mating Metal Gear Surface Texture on the Polymer Gear Surface Temperature,” Materials Today: Proceedings,. 2, pp. 1763–1769, // (2015). [CrossRef] [Google Scholar]
  25. A. J. Mertens and S. Senthilvelan, “Effect of mating metal gear surface texture on the polymer gear surface temperature,” Materials Today-Proceedings. 2, pp. 1763–1769, (2015). [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.