Open Access
MATEC Web Conf.
Volume 90, 2017
The 2nd International Conference on Automotive Innovation and Green Vehicle (AiGEV 2016)
Article Number 01058
Number of page(s) 8
Published online 20 December 2016
  1. E. Usui, T. Shirakashi, and T. Kitagawa, Analytical Prediction of Three Dimensional Cutting Process—Part 3: Cutting Temperature and Crater Wear of Carbide Tool. Journal of Engineering for Industry, 1978. 100(2): p. 236–243. [Google Scholar]
  2. M.A. Davies, et al., On The Measurement of Temperature in Material Removal Processes. CIRP Annals - Manufacturing Technology, 2007. 56(2): p. 581–604. [CrossRef] [Google Scholar]
  3. B.C. Ghani and S. Anwar, Design and analysis of the internally cooled smart cutting tools with the applications to adaptive machining. 2013, Brunel University School of Engineering and Design PhD Theses. [Google Scholar]
  4. G. Byrne, D. Dornfeld, and B. Denkena, Advancing cutting technology. CIRP Annals-Manufacturing Technology, 2003. 52(2): p. 483–507. [CrossRef] [Google Scholar]
  5. N. Canter, The possibilities and limitations of dry machining. Tribology & Lubrication Technology, 2009. 65(3): p. 40. [Google Scholar]
  6. P. Sreejith and B. Ngoi, Dry machining: machining of the future. Journal of materials processing technology, 2000. 101(1): p. 287–291. [CrossRef] [Google Scholar]
  7. F. Wardle, et al., Artificial neural networks for controlling the temperature of internally cooled turning tools. 2013. [Google Scholar]
  8. D. Umbrello, F. Micari, and I. Jawahir, The effects of cryogenic cooling on surface integrity in hard machining: A comparison with dry machining. CIRP Annals-Manufacturing Technology, 2012. 61(1): p. 103–106. [CrossRef] [Google Scholar]
  9. C. Ferri, et al., Efficiency in contamination-free machining using microfluidic structures. CIRP Journal of Manufacturing Science and Technology, 2014. 7(2): p. 97–105. [CrossRef] [Google Scholar]
  10. J.S. Dureja, et al., Performance evaluation of coated carbide tool in machining of stainless steel (AISI 202) under minimum quantity lubrication (MQL). International Journal of Precision Engineering and Manufacturing-Green Technology, 2015. 2(2): p. 123–129. [CrossRef] [Google Scholar]
  11. T. Obikawa, 11.11 - Machining with Least Quantity Lubrication A2 – Hashmi, Saleem, in Comprehensive Materials Processing, G.F. Batalha, C.J.V. Tyne, and B. Yilbas, Editors. 2014, Elsevier: Oxford. p. 255–281. [CrossRef] [Google Scholar]
  12. T. Minton, et al., Temperature of internally-cooled diamond-coated tools for dry-cutting titanium. International Journal of Machine Tools and Manufacture, 2013. 75: p. 27–35. [Google Scholar]
  13. S. Shu, et al., An Innovative Method to Measure the Cutting Temperature in Process by Using an Internally Cooled Smart Cutting Tool. Journal of Manufacturing Science and Engineering, 2013. 135(6): p. 061018. [CrossRef] [Google Scholar]
  14. M. Bermingham, et al., New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 2011. 51(6): p. 500–511. [CrossRef] [Google Scholar]
  15. C. Machai and D. Biermann, Machining of β-titanium-alloy Ti–10V–2Fe–3Al under cryogenic conditions: Cooling with carbon dioxide snow. Journal of Materials Processing Technology, 2011. 211(6): p. 1175–1183. [CrossRef] [Google Scholar]
  16. E. Rahim, et al., Experimental investigation of minimum quantity lubrication (MQL) as a sustainable cooling technique. Procedia CIRP, 2015. 26: p. 351–354. [CrossRef] [Google Scholar]
  17. X. Sun, et al., Design and analysis of an internally cooled smart cutting tool for dry cutting. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2012. 226(4): p. 585–591. [CrossRef] [Google Scholar]
  18. J. Giannatsis and V. Dedoussis, Additive fabrication technologies applied to medicine and health care: a review. The International Journal of Advanced Manufacturing Technology, 2009. 40(1–2): p. 116–127. [CrossRef] [Google Scholar]
  19. F.P.W. Melchels, et al., Additive manufacturing of tissues and organs. Progress in Polymer Science, 2012. 37(8): p. 1079–1104. [Google Scholar]
  20. L.E. Murr, et al., Metal fabrication by additive manufacturing using laser and electron beam melting technologies. Journal of Materials Science & Technology, 2012. 28(1): p. 1–14. [CrossRef] [Google Scholar]
  21. Z.A. Mat Taib, et al. Dimensional Accuracy Study of Open Cellular Structure CoCrMo Alloy Fabricated by Selective Laser Melting Process. in Advanced Materials Research. 2016. Trans Tech Publ. [Google Scholar]
  22. E. Pessard, et al., Complex cast parts with rapid tooling: rapid manufacturing point of view. The International Journal of Advanced Manufacturing Technology, 2008. 39(9–10): p. 898–904. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.