EDPS Account

Volume 159 (2018)

Free Access to the whole issue

MATEC Web of Conferences

Volume 159 (2018)

The 2^nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)

Bali, Indonesia, August 24-26, 2017
B.H. Setiadji, A.L. Han, A. Widodo, J.D. Setiawan, O. Kurdi and J.U.D. Hatmoko (Eds.)

Export the citation of the selected articles Export
Select all

Open Access

Statement of Peer review

Published online: 30 March 2018

PDF (44.3 KB)

Built Environment

Open Access

Housing Typology of Bali Aga Architecture in Sukawana Village: Developments and Challenge 01001

Ni Made Yudantini and Kadek Agus Surya Darma

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901001

Open Access

An investigation of spatial arrangement, form, and structural system of traditional houses in Pedawa indigenous village - Bali 01002

Tri Anggraini Prajnawrdhi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901002

Open Access

Sustainable Streetscape Design Guideline based on Universal Design Principles 01003

Bangun IR Harsritanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901003

Open Access

On the Sound Absorption Improvement of Water Hyacinth and Coconut Husk based Fiber Reinforced Polymer Panel 01004

Erni Setyowati, Iwan Yahya, Edi Supriyo, Intan C. Romadhona and Aris Minardi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901004

Open Access

Dynamic Response of RC Cantilever Beam by Equivalent Single Degree of Freedom Method on Elastic Analysis – A Review on Transformation Factors and Dynamic Magnification Factors 01005

Sri Tudjono and Patria Kusumaningrum

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901005

Open Access

Development of Back-calculation Model for Aggregate Gradation Determination Using Fractal Theory 01006

Bagus Hario Setiadji, Supriyono and Djoko Purwanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901006

Open Access

Modelling and analysis the effect of unbalanced moment directions on behaviour of edge column-slab connections 01007

I Ketut Sudarsana, I Gede Gegiranang Wiryadi and Gede Adi Susila

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901007

Open Access

Effect of Cement Variation on Properties of CLC Concrete Masonry Brick 01008

Erwin Sutandar, Asep Supriyadi and Cek Putera Andalan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901008

Open Access

Comparison of Genetic Algorithm and Harmony Search Method for 2D Geometry Optimization. 01009

Mohammad Ghozi and Anik Budiati

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901009

Open Access

Interval Confinement in Compression Zone to Evaluated Beams Performance Subjected Monotonic Loads 01010

Yulita Arni Priastiwi, Iswandi Imran, Nuroji and Rudi Yuniarto Adi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901010

Open Access

Development of seismic risk microzonation map for Semarang due to Semarang fault earthquake scenarios with maximum magnitude 6.9 Mw 01011

Windu Partono, Masyhur Irsyam and Sri Prabandiyani Retno Wardani

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901011

Open Access

Project Cost Estimation Based on Standard Price of Goods and Services (SHBJ) 01012

Toriq Arif Ghuzdewan and Brigitta Petra Kartika Narindri

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901012

Open Access

Right Turn Coeficient Evaluation Analysis on Intersection capasity formula at Indonesia Highway Capasity Manual 1997 Using Vehicle Tracking Simulation 01013

Basuki Kami Hari and Purwanto Djoko

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901013

Open Access

The Influence of Freight Generation Production Characteristics of the Internal – Regional Zone Commodities on Sustainable Freight Transportation Highway Network System 01014

Juang Akbardin, Danang Parikesit, Bambang Riyanto and Agus Taufik Mulyono

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901014

Open Access

Developing a Prototype of Early Warning System of Delay Risks for Public Projects (EWaSDRiP) 01015

Jati Utomo Dwi Hatmoko, Hery Priyono, Mochamad Agung Wibowo and Riqi Radian Khasani

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901015

Open Access

Development of institutional funding model of deep discount bond and land lease on a toll road project 01016

Randika Dwirahman, Yusuf Latief and Ayomi Dita Rarasati

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901016

Open Access

The Comparison of Bond Strength between Geopolymer Concrete and OPC Concrete for Plain Reinforcing Bars 01017

Nuroji, Daniel Herdian Primadyas, Ilham Nurhuda and Muslikh

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901017

Open Access

Behavior of Geopolymer Concrete Confined by Circular Hoops 01018

Muslikh, N. K. Anggraini, D. Hardjito and Antonius

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901018

Open Access

Development of risk-based standardized WBS (Work Breakdown Structure) for quality planning of high rise building architectural works 01019

Mirradewi Rianty, Yusuf Latief and Leni Sagita Riantini

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901019

Open Access

Components of Indonesian Traditional Market: Design Tools for Revitalisation 01020

Ferry Hermawan, Himawan Indarto and Ismiyati

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901020

Open Access

River Conservation Using SECEEL Approach: A Case Study on East Flood Way River, Semarang, Central Java, Indonesia 01021

Ignatius Sriyana

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901021

Open Access

Determining Factors for Implementing Green Supply Chain Management in the Construction Industry: A Literature Review 01022

Mochammad Agung Wibowo, Naniek Utami Handayani, Anita Mustikasari, Asri Nurdiana and M. Nur Soleh

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901022

Open Access

Sustainable Community Based Water Supply at Salatiga by Use of Rapfish Method 01023

Suharyanto, Angelica Deasy K and Sudarno

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901023

Open Access

Indonesian Highway Capacity Guidance (IHCG) correction factor for signalized intersection 01024

Amelia K. Indriastuti and Eko Yulipriyono

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901024

Open Access

Critical Success Factors in Developing Collaborative Design-Build Project Team to Improve Project Performance 01025

Afrizal Nursin, Yusuf Latief and Ibrahim

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901025

Open Access

Optimization of irrigation water use to increase the benefit of agricultural products 01026

Edy Anto Soentoro, Erlangga Perwira, Yadi Suryadi and Winskayati

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901026

Open Access

Green House Gases (GHG’s) Emission Reduction Measures and Verification Challenge at Transport Sector 01027

Haryono Huboyo, Hari Wibowo and Winda Retna Sari

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901027

Open Access

Life-Cycle Assessment of Crude Palm Oil Produced at Mill J, PT XYZ, Sumatera Island using Eco-indicator 99 01028

Pertiwi Andarani, Winardi Dwi Nugraha, Desinta Sawitri and Wiwik Budiawan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901028

Open Access

Recovery Practice of Unsorted Solid Waste: from Landfill towards Economic Benefits in Semarang, Indonesia 01029

Mochamad Arief Budihardjo and Indah Fajarini Sri Wahyuningrum

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901029

Open Access

Methane enrichment on biogas generated from anaerobic digester using coconut shell-based activated carbon 01030

Ridwan Hakim, Nyoman Suwartha and Cindy Priadi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901030

Open Access

Analysis of Groundwater Quality Surrounding Municipal Solid Waste Landfill: Banyuurip Landfill, Magelang, Indonesia 01031

Mochamad Arief Budihardjo, Purwono and Annisa Selfi Nugraheni

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901031

Open Access

Predicting Lead (Pb) Contaminant Migration through Landfill Liner 01032

Purwono and Mochamad Arief Budihardjo

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901032

Open Access

Leaves Composting Process and the Influence of Rumen Content and Bran Addition 01033

Mochamad Arief Budihardjo, Endro Sutrisno, Purwono and Maulia Fatimah

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901033

Open Access

Analog Study of Fluid Flow on Deformation Band at Petani Formation, Riau, Indonesia 01034

Tiggi Choanji, Novia Rita, Yuniarti Yuskar and Aulia Pradana

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901034

Open Access

Palaeoecological analysis of Sentolo Formation based on foraminifera fossil assemblage from stratigraphic cross-sectional measurements in Pengasih, Kulon Progo, Yogyakarta 01035

Anis Kurniasih, Muhammad Idham Fauzan, Tri Winarno and Reddy Setyawan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901035

Open Access

Application of Aquifer Vulnerability Index (AVI) method to assess groundwater vulnerability to contamination in Semarang urban area 01036

Thomas Triadi Putranto, Narulita Santi, Dian Agus Widiarso and Dimas Pamungkas

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901036

Open Access

The Influence of Fault and Stress Contributed On Overpressure Mechanism For Neogen Formation (Mundu, Wonocolo, Ngrayong) East Java Basin, Indonesia 01037

Fahrudin, Hadi Nugroho, Tri Winarno, Zul Hayuddin, Joko Suprayetno, Rully Firmansyah, Muhajir and Ade Kadarusman

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901037

Open Access

Characteristics of Lateritic Nickel Mineralization In Mid Part of Madang and Serakaman Areas, Sebuku Island, South Kalimantan 01038

Yoga Aribowo, Yudi Syahputra and Dian Agus Widiarso

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901038

Open Access

Analysis of Piping at Kedung Uling Earthfill Dam, Wonogiri Regency, Central Java Province, Indonesia 01039

Najib, Agus Setyawan, Indriyani Ardyarini and Dwiyanto Joko Suprapto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901039

Open Access

The analysis of volcanic activity influences at the lower and middle part of Sentolo Formation, Kulon Progo using petrographic method 01040

Tri Winarno, Jenian Marin, Ilham Hani Pratama and Anis Kurniasih

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901040

Open Access

Analysis of Landslide Disaster Impact Identification Using Unmanned Aerial Vehicle (UAV) and Geographic Information System (GIS) (Case Study: Ngesrep Sub District, Semarang City) 01041

Yudo Prasetyo, Nurhadi Bashit and Reyhan Azeriansyah

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901041

Open Access

The Spatial Analysis to Choose a Location to be Designated as a Landfill Site 01042

Zaflis Zaim and Febby Asteriani

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901042

Open Access

Development of two components acceleration time histories for Semarang, Indonesia, due to Semarang fault earthquake scenarios using 30 meters soil deposit model 01043

Windu Partono

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901043

Open Access

Spatial Studies and juridical utilization of vacant land and abandoned land control in efforts of regional authority in semarang city 01044

Sawitri Subiyanto and Fauzi Janu Amarrohman

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901044

Open Access

Development of collaboration in sustainable agribusiness cluster 01045

Tomy Perdana, Mahra Arari H., Fernianda Rahayu H., Tetep Ginanjar and Ajeng Sesy N.P.

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901045

Open Access

Coordination and Collaboration Functions of Disaster Management Centers for Humanitarian Logistics: A Case Study at Merapi Eruption 01046

Naniek Utami Handayani and Anita Mustikasari

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901046

Open Access

E-Translator Kawi to Bahasa 01047

Oka Sudana, Darma Putra, M. Sudarma, Rukmi S. Hartati, Ryan Pradnya Prastika and Ayu Wirdiani

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901047

Open Access

Housing Satisfaction and Willingness to Move to Low-cost Rental Apartments of Slum Dwellers in Semarang Urban Area 01048

Asnawi Manaf, Hadi Wahyono, Ita Puspita Sari and Dias Aprilia

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901048

Open Access

The potential biodiesel production from Cerbera odollam oil (Bintaro) in Aceh 01049

Khairil, Aulia Rizki, Iskandar, Jalaluddin, A.S. Silitonga, H.H. Masjuki and T.M.I. Mahlia

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901049

Open Access

Fatigue Testing and Evaluation of Fatigue Strength under Multiaxial Stress State; Why do we need fatigue testing? 01050

Takamoto Itoh, Fumio Ogawa and Takahiro Morishita

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901050

Open Access

Experimental performance studies of small wall room air conditioner for R410A retrofitted with R290 01051

Berkah Fajar TK and Geraldus Nicolas Dipto I

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901051

Open Access

Simulation and analysis of the aeroelastic-galloping-based piezoelectric energy harvester utilizing FEM and CFD 01052

Ismoyo Haryanto, Achmad Widodo, Toni Prahasto, Djoeli Satrijo, Iswan Pradiptya and Hassen Ouakad

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901052

Open Access

An Integration of PSO-based Feature Selection and Random Forest for Anomaly Detection in IoT Network 01053

Bayu Adhi Tama and Kyung-Hyune Rhee

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901053

Open Access

Analysis of calcium carbonate polymorphs deposited in water piping system and the effect of tartaric acid additive 01054

W. A. Putranto, Y. Umardhani, Sulistyo, Yurianto and A. P. Bayuseno

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901054

Open Access

Rear Wheel Drive Recumbent Bicycle for Urban Transportation in a Tropical Emerging Country 01055

Bambang Suhardi, Ilham Priadythama and Pringgo Widyo Laksono

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901055

Open Access

Synthesis of barium sulfate in the variation of temperature and additive concentration 01056

Waleed Ali, Wahyu Putranto, Stefanus Muryanto and Athanasius Bayuseno

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901056

Open Access

Influence of hull entrance angle “Perintis 750 DWT”, toward ship resistance: the case study for design development “Perintis 750 DWT.” 01057

Eko Sasmito Hadi, Parlindungan Manik and Muhammad Iqbal

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901057

Open Access

Structural analysis for in-service gas pipeline lowering using numerical method 01058

Mochamad Safarudin and Joga Dharma Setiawan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901058

Open Access

Resistance and Stability Analysis for Catamaran Fishing Vessel with Solar Cell in Calm Water 01059

Teguh Putranto, Wasis Dwi Aryawan, Hesty Anita Kurniawati, Dony Setyawan and Sri Rejeki Wahyu Pribadi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901059

Open Access

Synthesis Sensitive Layer of Ethylene Gas Sensor Based Tin Oxide Nanoparticles Using Water as Solvent In Precipitation Method 01060

Erica Caesariaty Harni Prima Nabena, Brian Yuliarto, Nugraha and Muhammad Iqbal

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901060

Open Access

Projection Matrix Design for Co-Sparse Analysis Model Based Compressive Sensing 01061

Endra Oey, Dadang Gunawan and Dodi Sudiana

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815901061

Manufacturing

Open Access

Machine health prognosis based on multiregime condition monitoring signals 02001

Achmad Widodo, Toni Prahasto, Djoeli Satrijo, Budi Setiyana, Sugiyanto, Ismoyo Haryanto and Didik Djoko Susilo

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902001

Open Access

Induction Motor Centrifugal Blower Health Diagnostic Based on Color Segmentation of Thermal Image and Vibration Signal Feature 02002

Panut Widodo, Gunawan Dwi Haryadi and Achmad Widodo

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902002

Open Access

Design studies of inner and outer embedded Permanent Magnet for hybrid electric vehicles 02003

Aravind CV, Ramani Kannan, Heng Jing Lei and Joga Dharma Setiawan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902003

Open Access

Porosity Control and Mechanical Properties of Porous Ceramic Material from Plered Region 02004

S. Sulistyo and Rizky

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902004

Open Access

Polyurethanization temperature effect to the thermal behaviour of cellulose – fiber based hybrid polyurethane 02005

Herald Kurnia Adi, Fauzia Hanum Ikhwan, Hasyim Aidilichsan Muliawan and Mochamad Chalid

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902005

Open Access

Fault Diagnostic System Bearing Centrifugal Pump Using K-Means Method For Thermography Image And Signal Analysis Vibrations 02006

Agung Yudhistira Hidayat, Achmad Widodo and Gunawan Dwi Haryadi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902006

Open Access

Adomian decomposition method for solving initial value problems in vibration models 02007

Sudi Mungkasi and I Made Wicaksana Ekaputra

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902007

Open Access

Effect of post curing method on flexural strength of composite friction brake 02008

Herru Santoso Budiono, Eko Surojo, Nurul Muhayat and Wijang Wisnu Raharjo

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902008

Open Access

The influence of welding speed conditions of GMAW on mechanical properties of 316L austenitic stainless steel 02009

I.M.W. Ekaputra, Sudi Mungkasi, Gunawan Dwi Haryadi, Rando Tungga Dewa and Seon-Jin Kim

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902009

Open Access

Measurement of injury rate on fish skin and performance comparison based on LAB* and HSV color spaces 02010

Minh Thien Tran, Jotje Rantung, Trong Hai Nguyen, Hak Kyeong Kim and Sang Bong Kim

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902010

Open Access

Flame stability and behavior inside meso-scale combustor with different flame holder 02011

Lilis Yuliati

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902011

Open Access

Numerical simulation of heat transfer augmentation in fin-and-tube heat exchanger with various number of rows of concave rectangular winglet vortex generator 02012

Syaiful, Imam Syarifudin, Maria F. Soetanto and Myung-whan Bae

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902012

Open Access

Performance Analysis of Sea Water Solar Still To Produce Fresh Water and Salt Using Flat Plate Collectors 02013

Mulyanef, Duskiardi and Rahmad Hidayat

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902013

Open Access

The Influence of Guide Vane to the Performance of Cross-Flow Wind Turbine on Waste Energy Harvesting System 02014

Budi Santoso and Dominicus Danardono Dwi Prija Tjahjana

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902014

Open Access

Development of Tension-Torsion Multiaxial Creep Testing Apparatus for Heat Resisting Steel 02015

Noritake Hiyoshi and Yoshihisa Iriyama

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902015

Open Access

Performance prediction of magnetorheological valves under various type of fluid and flux path 02016

Muhammad Hafiz Idris, Saiful Amri Mazlan, Ubaidillah Ubaidillah and Fitrian Imaduddin

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902016

Open Access

Surface Texture Influences on the Running-in Behavior and Friction Reduction 02017

Zhouyong Hou and Tomomi Honda

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902017

Open Access

Analysis of chip geometry and surface roughness at low speed turning in various commercial steels 02018

Mudjijanto, Sulistyo and Rusnaldy

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902018

Open Access

Comparison of ratio loaded and unloaded foot area of flat foot and healthy foot in younger adults 02019

Gunawan Dwi Haryadi, Dwi Basuki Wibowo, Achmad Widodo and Agus Suprihanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902019

Open Access

Optimization of Ridge Waveguide Structure for Temperature Sensor Application Using Finite Difference Method 02020

Ian Yulianti, Ngurah Made D. P, Yuni Lestiyanti and Ojo Kurdi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902020

Open Access

Experimental Study Performance R-22 AC Split Retrofitted With Propane 02021

Imam Ridwan Tanaka, Berkah Fajar, Tony Suryo Utomo, Eflita Yohana and Mustaqim

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902021

Open Access

The Modeling Of A Conceptual Engineering Design System Using The Decision-Matrix Logic 02022

Safarudin Ramdhani and J Jamari

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902022

Open Access

Characterization chip formation of commercial steel materials at low speed cylindrical grinding processes 02023

Wahyu Isti Nugroho, Sri Nugroho and Rusnaldy

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902023

Open Access

The Performance of Pump as Turbine with Machined Impellers 02024

D.L Zariatin, Shanti Kumbarasari and Dwi Rahmalina

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902024

Open Access

A study of tea leaves drying using dehumidification process and regeneration of liquid desiccant in a closed-cycle dehumidification-humidification 02025

Eflita Yohana, Mohammad Endy Yulianto, Shofwan Bahar, Azza Alifa Muhammad and Novi Laura Indrayani

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902025

Open Access

Modeling, Identification, and Simulation of Positional Displacement Control for Ribbon Bridges 02026

Van Trong Nguyen, Yong-Woon Choi, Jung-In Yoon, Kwang-Hwan Choi, Chang-Hyo Son and Young-Bok Kim

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902026

Open Access

Failure Analysis of Shaft Circulating Water Pump (CWP) used in Power Plant 02027

Abdul Hamid, Sri Nugroho, Gunawan Dwi Haryadi and Khaeroman

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902027

Open Access

Detection of gear defects using method of wavelet decomposition and cross-correlation - Experiment to develop a feasible detection method 02028

R. Lullus Lambang G Hidayat and Budi Santoso

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902028

Open Access

Path planning for automatic guided vehicle with multiple target points in dynamic environment 02029

Chang Kyu Kim, Huy Hung Nguyen, Dae Hwan Kim, Hak Kyeong Kim and Sang Bong Kim

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902029

Open Access

Design and fabrication of a twist fixture to measure torsional stiffness of a pick up chassis 02030

Ojo Kurdi, Mohd Shukri Yob, Awisqarni Haji Ishamuddin, Agus Suprihanto, Susilo Adi Widyanto, Dwi Basuki Wibowo and Ian Yulianti

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902030

Open Access

Morphology Evolution Of ZnO Thin Films Deposited By Nitrogen Mediated Crystallization Method 02031

Iping Suhariadi, Masaharu Shiratani and Naho Itagaki

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902031

Open Access

Digital integrated instrument for measuring BMI and comparing to the ideal BMI for age as a guidance for Indonesian military recruitment 02032

Dwi Basuki Wibowo, Ismoyo, Agus Suprihanto, Wahyu Caesarendra and Mochammad Ariyanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902032

Open Access

Effects of Different Heel Heights on Heel Pressure Distribution for Calcaneal Spur Patients During Standing: Finite Element Analysis 02033

Dwi Basuki Wibowo, Achmad Widodo, Gunawan Dwi Haryadi and Agus Suprihanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902033

Open Access

A Review on Sensors for Real-time Monitoring and Control Systems on Machining and Surface Finishing Processes 02034

Tomi Wijaya, Wahyu Caesarendra, Tegoeh Tjahjowidodo, Bobby K Pappachan, Arthur Wee and Muhammad Izzat Roslan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902034

Open Access

Modal Analysis of Replica Boss Hole During the Deburring Process in Aerospace Manufacturing Industry 02035

Claudy Andriani, Wahyu Caesarendra, Tegoeh Tjahjowidodo, Tomi Wijaya and Bobby K Pappachan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902035

Open Access

Investigation of Mechanical Properties of Al7Si/ SiC and Al7SiMg/SiC Composites Produced by Semi Solid Stir Casting Technique 02036

Sulardjaka, Sri Nugroho, Suyanto and Deni Fajar Fitriana

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902036

Open Access

Mechanical and microstructural characterization of ST 37 butt joints by friction stir 02037

Kasir and Sulardjaka

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902037

Open Access

CFD analysis on the aerodynamics characteristics of Jakarta-Bandung high speed train 02038

Tony Utomo, Berkah Fajar and Hendry Arpriyanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902038

Open Access

Design and Simulation of Fuzzy Logic Based Temperature Control for a Mixing Process in Therapeutic Pool 02039

Munadi, Erwin F. Ramadhan, Mochammad Ariyanto, Norman Iskandar, M.A. Amirullah, Hari P. Julianti and Rudy Setiawan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902039

Open Access

A Great Achievement of Calculated and Experimental Results of Char Kinetic Rate in Woody Mahogany Pyrolysis 02040

Widya Wijayanti and Mega Nur Sasongko

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902040

Open Access

Remaining Life Assessment of Superheater Tube in Boiler of Coal Fired Power Plant 02041

Habib Muhajir, Gunawan Dwi Haryadi and Achmad Widodo

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902041

Open Access

3D Numerical study on the effect of shaft eccentricity on the tribological performance of lubricated sliding contact 02042

Mohammad Tauviqirrahman, Bayu Kurniawan and Jamari

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902042

Open Access

Optimal passivity design of a virtual coupling including FIR-type fractional derivatives for a haptic interface 02043

Masayuki Kawai, Takuya Yamagishi and Shouta Minami

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902043

Open Access

Development of 6 DOF Supernumerary Robotic Fingers Integrated with 3D Animation 02044

Mochammad Ariyanto, Joga D. Setiawan, Munadi, Rifky Ismail and Zainal Arifin

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902044

Open Access

Design of a Low-Cost Fixed Wing UAV 02045

Mochammad Ariyanto, Joga D. Setiawan, Teguh Prabowo, Ismoyo Haryanto and Munadi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902045

Open Access

The effect of acid leaching time in modifying natural zeolite as catalyst for toluene steam reforming 02046

Joko Waluyo, I.G.B.N. Makertihartha and Herri Susanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902046

Open Access

Effect of quenching agent on dimension stability of Al 6061-Al₂O₃ composite 02047

Hammar Ilham Akbar, Eko Surojo and Dody Ariawan

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902047

Open Access

Design of Fractal Features-Based Partial Discharge Pattern Recognition using Multi Support Vector Machine Method 02048

Rahayu, G.T. Anuraga, H. Prasetia and Umar Khayam

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902048

Open Access

A review of low-cycle fatigue of Alloy 617 for use in VHTR components: Experimental outlook 02049

Rando Tungga Dewa, Jeong-Hun Park, Seon-Jin Kim, Woo-Gon Kim, Eung-Seon Kim, Gunawan D. Haryadi and I. M. W. Ekaputra

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902049

Open Access

Development of force feedback in steering systems for virtual driving simulator 02050

Joga Dharma Setiawan, Masri B. Baharom and M. Ammar Bin Abdul Wali

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902050

Open Access

Enhancement Surface Coating Stainless Steel And Copper Using Ultrasonic Batch 02051

Sendie Yuliarto Margen, S Sulistyo, Sri Nugroho and Yoga Setiawan Adi Nugroho

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902051

Open Access

Fabrication Dye Sensitized Solar Cells (DSSCs) Using β-Carotene Pigment Based Natural Dye. 02052

Wa Ode Nirwana Sari Halidun, Eka Cahya Prima, Brian Yuliarto and Suyatman

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902052

Open Access

Aluminum corner joint using friction stir welding 02053

Djarot B. Darmadi, Widia Setiawan, Anindito Purnowidodo and Eko Siswanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902053

Open Access

The Structural Response Investigation of Modular Pontoon Collar Floating Cage due to Current Load to Support Fish Farming Activities 02054

Aulia Windyandari and Ahmad Fauzan Zakki

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902054

Open Access

Impact phenomena assessment: Part II – Buffer container as a measure to reduce cargo leakage in collision 02055

Aditya Rio Prabowo, Seung Jun Baek, Seung Geon Lee, Dong Myung Bae, Jung Min Sohn, Aldias Bahatmaka and Samuel Samuel

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902055

Open Access

Investigation on the performance of the traditional Indonesian fishing vessel 02056

Aldias Bahatmaka, Dong-Joon Kim, Samuel, Aditya Rio Prabowo and May-Thu Zaw

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902056

Open Access

Bulbous bow applications on a catamaran fishing vessel for improving performance 02057

Samuel, Dong-Joon Kim, Muhammad Iqbal, Aldias Bahatmaka and Aditya Rio Prabowo

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902057

Open Access

Analysis of Effect of Bulbous Bow Shape to Ship Resistance in Catamaran Boat 02058

Deddy Chrismianto, Kiryanto and Berlian Arswendo Adietya

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902058

Open Access

Numerical approaches in idealizing mass of fluid in tank for ship vibration analysis 02059

Jung Hoon Byeon, Hyun Jin Cho, Seung Jun Baek, Aditya Rio Prabowo, Dong Myung Bae and Jung Min Sohn

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902059

Open Access

Design and Construction of Spud Housing for Floating Dock 02060

Hasanudin Hasanudin and Ardi Nugroho Yulianto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902060

Open Access

Impact phenomena assessment: Part I – Structural performance of a tanker subjected to ship grounding at the Arctic 02061

Aditya Rio Prabowo, Jung Hoon Byeon, Hyun Jin Cho, Jung Min Sohn, Dong Myung Bae and Joung Hyung Cho

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902061

Open Access

Calcium soap from palm fatty acid distillate for ruminant feed: Ca(OH)₂ as calcium source 02062

Lienda A. Handojo, Antonius Indarto, Dian Shofinita, Anggina Meitha, Rakhmawati Nabila, Harry Triharyogi, Maulana G.A. Hakim and Muhammad R. Saadi

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902062

Open Access

Effect of MgO to Fatty Acid Molar Ratio on the Production of Magnesium Salt of Fatty Acid from Palm Fatty Acid Distillates (PFAD) for Food Additives 02063

Listianingrum, Reni Yuniarti, Rd.H.R.M.T. Al-Aziz, Defri Rizaldy, Muhamad Insanu, Ardiyan Harimawan and Dianika Lestari

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902063

Open Access

An innovative method to produce drop-in fuel by alkaline earth-transition metals basic soap decarboxylation 02064

Godlief Fredrik Neonufa, Meiti Pratiwi, Astri Nur Istyami, Lidya Elizabeth, Sri Suminar Dewi, Ronny Purwadi, Tirto Prakoso and Tatang H. Soerawidjaja

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902064

Open Access

Crystallization of Barium Sulfate (BaSO₄) in a Flowing System: Influence of malic acid on Induction Time and Crystal Phase Transformation 02065

F. Sariman, A.P. Bayuseno and S. Muryanto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902065

Open Access

Improvement of magnetorheological greases with superparamagnetic nanoparticles 02066

Norzilawati Mohamad, Ubaidillah, Saiful Amri Mazlan, Seung-Bok Choi and Naim Abdul Halim

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902066

Open Access

A Quantitative Analysis of System Readiness Level Plus (SRL⁺): Development of Readiness Level Measurement 02067

Novi Marlyana, Alva Edy Tontowi and Hari Agung Yuniarto

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902067

Open Access

Design of Key Performance Indicators (KPI) for Sustainable Supply Chain Management (SSCM) Palm Oil Industry in Indonesia 02068

Elisa Kusrini and Rangga Primadasa

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902068

Open Access

Usability Evaluation of Anthropomorphic Prosthetic Hand Based on ISO 9241-11 02069

Novie Susanto, Wiwik Budiawan, Rifky Ismail, Mochammad Ariyanto and Ahmad Sahal

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902069

Open Access

Integration between Green Quality Function Deployment, Modularity Concept and Life Cycle Assessment Toward Sustainable Product Design 02070

Heru Prastawa, Sri Hartini, Mohamat Anshori, Siechara Hans and Christoper Wimba

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902070

Open Access

Improving performance measurement efficiency in public service using lean six sigma methodology 02071

Purnawan Adi Wicaksono, Heru Prastawa, Ghabyanza Pitaloka and Nurana Putri

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902071

Open Access

Effect of blanching-brine-calcium pretreatment on red chili pepper drying 02072

Uma Fadzilia Arifin, Mohamad Djaeni and Febiani Dwi Utari

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902072

Open Access

Optimization foam mat drying of roselle (Hibiscus sabdariffa L.) extract 02073

Mohammad Djaeni, Febiani Dwi Utari and Uma Fadzilia Arifin

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902073

Open Access

The Effect of Shear Wall Configuration on Seismic Performance in the Hotel Building 02074

Daud Rahmat Wiyono, Roi Milyardi and Cindrawaty Lesmana

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902074

Open Access

Performance of current transformer operate under harmonic condition and their effects on transformer differential protection 02075

Indra Nisja

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902075

Open Access

A Comparative Analysis of Mental Workload between Train and Bus Drivers 02076

Hartomo Soewardi and Perdana Suteja Putra

Published online: 30 March 2018

DOI: https://doi.org/10.1051/matecconf/201815902076