MATEC Web of Conferences
Volume 159, 2018The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|Number of page(s)||6|
|Published online||30 March 2018|
Effects of Different Heel Heights on Heel Pressure Distribution for Calcaneal Spur Patients During Standing: Finite Element Analysis
Center for Biomechanics, Central Laboratory of Research and Services, Diponegoro University
2 Center for Biomechatronics, Central Laboratory of Research and Services, Diponegoro University
3 Center for Biomaterials, Central Laboratory of Research and Services, Diponegoro University
* Corresponding author: email@example.com
This study was performed to investigate heel height shoe for every patient which peak pressure in the heel area is lower than pain minimum compressive pressure. Heel heights of the shoes are standardized as 0-4 cm. Sixteen patients with symptomatic heel spur participated in this study. Peak pressure due to its own weight is estimated using FEM and compared with the results of measurement using FSR (force sensing resistor). As heel height increased, peak pressure in heel region in the heel height 2 cm, 3 cm and 4 cm are larger 3.86% and smaller 5.04% and 22.11% respectively compared to the smallest pain compressive pressure. These peak pressures are significantly higher than the average pressure in CH (center of heel) measurement results due to the difference in the location of peak pressure to CH at average of 8.64 ± 1.44 mm.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.