Open Access
Issue
MATEC Web of Conferences
Volume 159, 2018
The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
Article Number 02018
Number of page(s) 6
Section Manufacturing
DOI https://doi.org/10.1051/matecconf/201815902018
Published online 30 March 2018
  1. A. Torres, I. Puertas, and C. J. Luis. Surface Roughness Analysis on the Dry Turning of an Al-Cu Alloy. Procedia Eng, vol. 132, 537–544 (2015) [CrossRef] [Google Scholar]
  2. M. Batista, J. Salguero, A. Gomez-Parra, S. Fernández-Vidal, and M. Marcos. SOM based methodology for evaluating shrinkage parameter of the chip developed in titanium dry turning process. Procedia CIRP, vol. 8, 534–539 (2013) [CrossRef] [Google Scholar]
  3. Y. Sanchez, F. J. Trujillo, L. Sevilla, and M. Marcos. Study of the Influence of the Cutting Parameters on the Chip Geometry during Machining Alloy UNS A97075. Procedia Eng, vol. 132, 513–520 (2015) [CrossRef] [Google Scholar]
  4. F. Vilches, L. Hurtado, F. Fernández, and C. Gamboa. Analysis of the Chip Geometry in Dry Machining of Aeronautical Aluminum Alloys. Appl. Sci, vol. 7, no. 2, 132 (2017) [CrossRef] [Google Scholar]
  5. T. Segreto, A. Simeone, and R. Teti. Chip Form Classification in Carbon Steel Turning through Cutting Force Measurement and Principal Component Analysis. Procedia CIRP, vol. 2, 49–54 (2012) [CrossRef] [Google Scholar]
  6. A. Agrawal, S. Goel, W. Bin, and M. Price. Prediction of surface roughness during hard turning of AISI 4340 steel. Appl. Soft Comput. J, vol. 30, 279–286 (2015) [CrossRef] [Google Scholar]
  7. D. Palanisamy, P. Senthil, and V. Senthilkumar. Science Direct The effect of aging on machinability of 15Cr – 5Ni precipitation hardened stainless steel. Arch. Civ. Mech. Eng, vol. 16, no. 1, 53–63 (2015) [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.