MATEC Web of Conferences
Volume 159, 2018The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|Number of page(s)||6|
|Published online||30 March 2018|
The influence of welding speed conditions of GMAW on mechanical properties of 316L austenitic stainless steel
Sanata Dharma University, Mrican, Tromol Pos 29, Yogyakarta 55002, Indonesia
2 Diponegoro University, Jl. Prof. Sudharto, SH., Tembalang-Semarang 50275, Indonesia
3 3Pukyong National University, 365, Shinsuro, Nam-gu, Busan 608-739, Korea
* Corresponding author: firstname.lastname@example.org
In this study, the influence of welding speed conditions of gas metal arc welding (GMAW) on mechanical properties of 316L austenitic stainless steel (SS) was investigated. The welding speed was applied with three different variations at 175 mm/minute, 190 mm/minute, and 205 mm/minute. The GMAW was equipped by solid electrode wire ER308L with 0.8 mm in diameter. The Vickers micro-hardness and tensile tests were conducted for each GMAW joint, and the results were discussed. It was found that the Vickers micro-hardness showed a dependence on welding speed conditions in weld metal (WM) and heat affected zone (HAZ) areas. A systematic increase in hardness was shown with an increase in welding speed. The ultimate tensile strength and yield strength of GMAW joints were found to decrease systematically with an increase in welding speed. From this investigation, it was found that GMAW joint with the welding speed at 175 mm/minute was suitable to be applied for 316L SS.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.