| Issue |
MATEC Web of Conferences
Volume 159, 2018
The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017)
|
|
|---|---|---|
| Article Number | 02047 | |
| Number of page(s) | 6 | |
| Section | Manufacturing | |
| DOI | https://doi.org/10.1051/matecconf/201815902047 | |
| Published online | 30 March 2018 | |
Effect of quenching agent on dimension stability of Al 6061-Al2O3 composite
1
Graduate School of Mechanical Engineering, Universitas Sebelas Maret, Indonesia
2
Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret, Indonesia
*
Al 6061-Al2O3 composite is a lightweight materials that can be used as an alternative material in automotive parts. T6 heat treatment is generally used on aluminium alloy series 6xxx . On T6 heat treatment process, material heated to temperature for obtaining a single phase of α, quenched and then continued by artificial ageing. Quenching is critical step because distortion can be occur in material. The aim of this research is to investigated effect of quenching agent and electroless coating treatment of Al2O3 in distortion at Al 6061-Al2O3 composite . The distortion was measured by dimensional change in the specimen. Coordinate Measuring Machine (CMM) was used to measured distortion based on coordinate change. Lower distortion are occur on 10E and 10N specimens. Electroless coating process on the reinforcement is more effective to obtain lower distortion on Al 6061-Al2O3 composite. The severity (H) of quenchant influenced distortion on specimen. Higher H value produce higher distortion on Al 6061-Al2O3 composite.
© The Authors, published by EDP Sciences, 2018
This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. (http://creativecommons.org/licenses/by/4.0/).
Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.
Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.
Initial download of the metrics may take a while.